Humimeter FS2 Manuale utente

User manual

grain moisture meter

humimeter FS2

Office: Jl. Radin Inten II No. 62 Duren Sawit, Jakarta 13440 - Indonesia

Workshop: Jl. Pahlawan Revolusi No. 22B, Jakarta 13430 - Indonesia

Phone: 021-8690 6777 (Hunting) Fax: 021-8690 6771

Mobile: +62 816 1740 8925

1. Place the empty provided cup (0.5 litre)

on the scale and turn the scale on. It

shows 0.0 gram.

2. Make sure that the measuring chamber is

completely empty. It is important that no

material is left in the measuring chamber

when you turn on the device.

3. Switch on the humimeter FS2 by pressing

the power button ( ) for 3 sec.

4. The next step is a self calibration. The

word “reinitialize” will show up on your

display. Accept by pressing the

button.

5. Select the right calibration curve for your

material under test using the buttons or

.

6. Fill up the cup with the sample material

(+/- 1.0g). The filling quantity needed is

shown on the upper left corner of the

display of the device.

Office: Jl. Radin Inten II No. 62 Duren Sawit, Jakarta 13440 - Indonesia

Workshop: Jl. Pahlawan Revolusi No. 22B, Jakarta 13430 - Indonesia

Phone: 021-8690 6777 (Hunting) Fax: 021-8690 6771

Mobile: +62 816 1740 8925

7. Fill up the measuring device with the

sample material. The filling needs to be

done slowly and constantly to ensure

reproducible results.

8. The display shows the measuring result.

9. If the measuring value is blinking, the

valid measuring range has been

exceeded (limits see list on page 5). In

this case the accuracy decreases.

10. To save the results in the store menu

press the ( button). Storage

was successful when the number in

front of the symbol increases. To

reach the store menu please press ( )

until the appears.

11. To name the saved results press the

button.

12. Empty the humimeter and ensure that no

grain rests are accumulated in the

measuring chamber.

Office: Jl. Radin Inten II No. 62 Duren Sawit, Jakarta 13440 - Indonesia

Workshop: Jl. Pahlawan Revolusi No. 22B, Jakarta 13430 - Indonesia

Phone: 021-8690 6777 (Hunting) Fax: 021-8690 6771

Mobile: +62 816 1740 8925

Changing batteries

If the batteries are empty, please proceed as follows:

1.) Press with your finger onto the arrow of

the battery cap und pull it back.

2.) Remove the empty batteries.

3.) Put four new batteries in the device.

Check the right position of the battery

poles.

4.) Press down the batteries and close the

cap.

If the battery symbol appears in the measuring

window resp. if a critical charge of battery is

shown in the status, the batteries have to be

changed IMMEDIATELY.

Also remove the batteries if you do not use your

humimeter device for a longer period. For

eventual resulting damages we cannot provide

any warranty.

List of calibration curves

Press the or key in the measuring window

for at least 3 seconds and a list with all

available sorts will appear. Select your sort by

pressing or and confirm with the key.

The measurement will continue automatically.

Office: Jl. Radin Inten II No. 62 Duren Sawit, Jakarta 13440 - Indonesia

Workshop: Jl. Pahlawan Revolusi No. 22B, Jakarta 13430 - Indonesia

Phone: 021-8690 6777 (Hunting) Fax: 021-8690 6771

Mobile: +62 816 1740 8925

Calibration curves

300g corn

5..40%

300g hand

corn

5..40%

300g rye

5..28%

300g triticale

5..28%

300g wheat

5..28%

300g durum

5..28%

300g spelt peeled

5..28%

300g barley

5..28%

190g oats

5..25%

300g rape

5..18%

230g pumpkin seed

2..20%

310g peas

5..25%

300g soybeans

9..18%

295g horse beans

10..20%

277g scarlet runner

8..25%

180g sunflower

5..18%

300g rice peeled

9..25%

250g rice unpeeled

4..30%

300g rice brown

4..26%

300g buckwheat

5..18%

300g millet

5..15%

300g sorghum millet

5..25%

200g jatropha

5..18%

reference

only for internal

use!

Additional calibration curves:

On request Schaller GmbH can develop customized calibration curves

for your specific product. Schaller GmbH can also enter already existing

calibration curves subsequently.

Design of the device

measuring

chamber

name of

calibration

curve

water content

batteries slot

(flipside)

POWER button

filler assistance

Office: Jl. Radin Inten II No. 62 Duren Sawit, Jakarta 13440 - Indonesia

Workshop: Jl. Pahlawan Revolusi No. 22B, Jakarta 13430 - Indonesia

Phone: 021-8690 6777 (Hunting) Fax: 021-8690 6771

Mobile: +62 816 1740 8925

Options

Date / Time

Log Time

Language

Unlock

°C / °F

o Userlevel

Materialcalib.

Password

Reset

Next calibration curve

Previous calibration curve

Power off (3 sec.)

Watch saved data (logs)

Save new value (log)

Power off (3 sec.)

Switch upper

Switch lower

Open this menu / Enter

ype selection

menu

Store menu

Main menu

Edit Logs

Manual Logs

Clear Logs

Options

Status

Keypad symbols

Measuring window:

Rolling Menu

Power ON / OFF

Switch upper

Switch lower

Save

Hold

Watch saved data

Add suppliers data

Menu:

Enter

Switch upper

Switch lower

Exit

Enter numbers

Enter letters

Next or right

Left

Yes

No

Shift

OK

Menu level overview

Overview main menu

Office: Jl. Radin Inten II No. 62 Duren Sawit, Jakarta 13440 - Indonesia

Workshop: Jl. Pahlawan Revolusi No. 22B, Jakarta 13430 - Indonesia

Phone: 021-8690 6777 (Hunting) Fax: 021-8690 6771

Mobile: +62 816 1740 8925

Determination of the material reference moisture

The principle is a comparison measurement with the dehydration

method according to EN ISO712. Take the measured sample and

weigh it. Dry it out in an oven and weigh it again.

Notes

-------------------------------------------------------------------------------

Mn: Mass with average moisture content

Mt: Mass of the dried sample

%F: Calculated moisture content

100% ×

−

=

Mn

MtMn

F

Office: Jl. Radin Inten II No. 62 Duren Sawit, Jakarta 13440 - Indonesia

Workshop: Jl. Pahlawan Revolusi No. 22B, Jakarta 13430 - Indonesia

Phone: 021-8690 6777 (Hunting) Fax: 021-8690 6771

Mobile: +62 816 1740 8925

Notes

-------------------------------------------------------------------------------

Office: Jl. Radin Inten II No. 62 Duren Sawit, Jakarta 13440 - Indonesia

Workshop: Jl. Pahlawan Revolusi No. 22B, Jakarta 13430 - Indonesia

Phone: 021-8690 6777 (Hunting) Fax: 021-8690 6771

Mobile: +62 816 1740 8925

Exemption from liability

For miss-readings and wrong measurements and of this resulting

damages we refuse any liability. This is a device for the quick

determination of moisture. The moisture depends on multiple

conditions and multiple materials. Therefore we recommend a

plausibility check of the measuring results. Each device includes a

serial number and the guarantee stamp. If those are broken, no

claims for guarantee can be made. In case of a faul

Activation of the “super user” function

2 times - Options – Unlock

Enter the 4-digit password using the button (standard is the

4-digit serial number) and confirm by pressing the button.

Office: Jl. Radin Inten II No. 62 Duren Sawit, Jakarta 13440 - Indonesia

Workshop: Jl. Pahlawan Revolusi No. 22B, Jakarta 13430 - Indonesia

Phone: 021-8690 6777 (Hunting) Fax: 021-8690 6771

Mobile: +62 816 1740 8925

Humimeter FS2 Manuale utente

Manuali Strumento di misura popolari di altre marche