Hunt HTP-T800 Manuale utente
HTP‐T800
H.264VIDEOSERVER
UserManualVer.1.0
HTP-T800 User Manual
-1-
Safety Precaution
Make sure to turn off the power before installing HTP-T800.
Do not install under the direct sunlight or in dusty areas.
Make sure to use the product within the temperature and humidity specified in the specification.
Do not operate the product in presence of vibrations or strong magnetic fields.
Do not put electrically conducting materials in the ventilation hole.
Do not open the top cover of the product. It may cause a failure or electric shock on the
components.
To prevent from overheating, make sure to keep the distance at least 10cm from the ventilation
hole.
Check for proper voltage before connecting the power.
We appreciate your purchasing HTP-T800.
Before installing the product, please read the following with care.
HTP-T800 User Manual
-2-
Table of Content
Table of Content ................................................................................................................................... 2
1. Introduction ...................................................................................................................................... 4
1. About User Manual.................................................................................................................... 4
2. Feature...................................................................................................................................... 4
3. Product and Accessories ........................................................................................................... 6
4. Part Names and Description...................................................................................................... 7
5. System Modes and Connections............................................................................................... 8
2. Installation ...................................................................................................................................... 12
1. Connecting Video .................................................................................................................... 12
2. Connecting Audio .................................................................................................................... 12
3. Connecting Serial Ports........................................................................................................... 12
4. Connecting Sensor and Alarm................................................................................................. 12
5. Connecting Power ................................................................................................................... 12
6. Checking Operating................................................................................................................. 13
3. System Operation........................................................................................................................... 14
1. LED Display ............................................................................................................................ 14
2. Remote Video Monitoring ........................................................................................................ 14
3. Initialization of IP Address ....................................................................................................... 16
4. Remote Configuration..................................................................................................................... 18
1. Remote Configuration ............................................................................................................. 18
2. Encoder Configuration............................................................................................................. 18
2.1 System Configuration ..................................................................................................... 19
2.2 Video Configuration........................................................................................................ 21
2.3 Audio Configuration........................................................................................................ 25
2.4 Network Configuration.................................................................................................... 26
2.5 Serial Port Configuration ................................................................................................ 29
2.6 Event Configuration........................................................................................................ 32
2.7 Preset Configuration....................................................................................................... 35
2.8 User Configuration ......................................................................................................... 36
3. Decoder System...................................................................................................................... 39
3.1 Video Configuration........................................................................................................ 40
3.2 Network Configuration.................................................................................................... 41
3.3 Event Configuration........................................................................................................ 43
5. True Manager ................................................................................................................................. 45
1. True Manager Software........................................................................................................... 45
2. Server Registration and Removal............................................................................................ 45
HTP-T800 User Manual
-3-
3. Server Connection Management............................................................................................. 48
4. Server Status Monitoring ......................................................................................................... 48
5. Network and System Diagnostics ............................................................................................ 49
6. F/W Upgrade........................................................................................................................... 52
7. Remove Configuration and Video Monitoring .......................................................................... 53
6. Trouble Shooting ............................................................................................................................ 53
Appendix A: Sensor and Alarm Port ................................................................................................... 54
1. Sensor Port ............................................................................................................................. 54
2. Alarm Port ............................................................................................................................... 54
Appendix B: Serial Port ...................................................................................................................... 55
1. RS-232 Port ............................................................................................................................ 55
2. RS-422/485 Port...................................................................................................................... 55
3. PoE Specification .................................................................................................................... 56
HTP-T800 User Manual
-4-
1. Introduction
1. About User Manual
The User Manual is provided information on operation of the high quality video surveillance system,
This manual includes how to trouble shoot in case of problems as well as installation, operation and
setting up the HTP-T800
2. Feature
HTP-T800 is a video and audio surveillance transmission system based on IP network through LAN,
ADSL/VDSL, and Wireless LAN. The HTP-T800 series operates as one of the two modes: Encoder,
Decoder. Encoder system compresses and transmits video data. Decoder receives and
decompresses the video data.
Video
-High-quality compression algorithm, H.264 & MJPEG support
-Compression in various resolution: CIF, Half-D1 and D1
-Wide range of video transmission rate: 32kbps ~ 8Mbps
-Various transmission mode: CBR and VBR
-Motion Detection
Audio
-Multi-transmission mode: Uni-direction (Encoder -> Decoder, Decoder -> Encoder), Bi-
direction
Network
-Fixed IP & Dynamic IP(DHCP) support
-1:1, 1:N support
-Multicasting
-Automatic transmit rate control according to network condition
Serial Data
-Two serial ports
-Various PTZ camera protocol
-Data pass-through mode: Serial data communication between Encoder – Decoder
HTP-T800 User Manual
-5-
Sensor and Alarm
-Support direct connections of external sensor and alarm devices.
-Event Alarm
USB
-Connection to internal or external USB storage for remote access
User Interface
-System status display utilizing OSD(On Screen Display)
-Diagnose and upgrade through dedicated program called True Manager
-System configuration using Internet Explorer
High Reliability
-Reliable embedded system
-System recovery utilizing dual watch-dog functions
HTP-T800 User Manual
-6-
3. Product and Accessories
HTP-T800 System Quick Manual
Power adaptor and cable User Manual & S/W CD
Screws Brackets
<Picture 1> Product and Accessories
HTP-T800 User Manual
-7-
4. Part Names and Description
Front View
Parts Function
nLEDs Display power On/Off condition, Link, Status and data
oAudio In, Out Audio Input and Output
pHDMI Output HDMI Output
qUSB USB port for any USB device
rLAN(Ethernet) 100/10-base-T Ethernet interface
sReset button Initialization of network setting
s
p q
o
r
n
HTP-T800 User Manual
-8-
Rear View
Te r m i n al Function
nPOWER IN DC 12V power input
oSENSOR Sensor input
pALARM Relay output
qRS-422/485
(COM2)
Serial port 2 (COM2) for PTZ control and etc. Support RS-422 and
RS-485 protocol
rVIDEO OUT Video output
sVIDEO IN Video input
tAUDIO OUT Audio output
uAUDIO IN Audio input
vRESET Reset button for network reset
5. System Modes and Connections
The HTP-T800 system operates in one of two modes: Encoder, Decoder. HTP-T800 systems can be
connected in either 1-to-1 fashion where one encoder is connected one decoder or 1-to-many fashion
where one encoder connected to many decoders.
r t
o p q s
n
HTP-T800 User Manual
-9-
Following chart shows possible combinations of video, audio and serial data transmission.
System Mode Video Audio Serial Data
Encoder Transmit Transmission/Receive Transmit/Receive
Decoder Receive Transmission /Receive Transmit/Receive
Therefore, the system modes are defined by the video communication and all system modes are
capable of bi-directional transmission of audio or serial data.
Topology
Generally, the encoder and the decoder are connected in 1-to-1 mode. To support specific situations,
1-to-many connection is also supported.
1:1 Connection (Unidirection)
Mostly used configuration is 1 to 1 connection. An encoder is installed at a site where video images
can be transmitted and a decoder is installed at a center location to receive and view the video
images on analog monitor. Audio and serial data are transferred in either direction.
1:N Connection (Unidirection)
Encoder Decoder
Site Remote Center
Indice
Altri manuali Hunt Server
