Hyndsight Vision Systems capture kit Manuale utente
USER MANUAL
Vision Systems
CAPTURE
TM
CAPTURE EVERY MOMENT
3
TABLE OF CONTENTS
INTENDED USE
SAFETY
CAUTION
CARE INSTRUCTIONS
KIT CONTENTS
OVERVIEW
CHARGING
SINGLE CAMERA SET-UP
POWER ON
DATE & TIME
IRROR IMAGE VIEW
BRIGHTNESS & NIGHT MODE
ZOOM
RECORD (MONITOR, CAMERA)
WAKE CAMERA
VIEW (MONITOR, CAMERA)
DELETE FROM MONITOR
MULTI-CAMERA SET-UP
PAIR ADDITIONAL CAMERAS
UNPAIR
SELECT CAMERA
SCAN
RECORD
POWER OFF
FLUSH BRACKET MOUNTING
TROUBLESHOOTING
PRODUCT SPECIFICATIONS & WARRANTY
4
5
6
7
8
9
10
11
11
12
12
13
13
14
16
17
18
19
19
19
20
20
21
21
22
23
24
4INTENDED USE
Hyndsight Vision Systems, Inc. wireless cameras and monitors are to be used as an aid for visualizing blind spot conditions
or for monitoring locations not always in clear sight. CAPTURE cameras have a memory card slot, and the monitor has built-
in memory allowing the user to record events. Use of your own common sense and best judgment is always necessary both
before and during use of this product. Hyndsight Vision Systems, Inc. is not responsible for accidents of actions that result
under use of this product.
5
IMPORTANT SAFETY NOTICE
Program your settings before you operate any vehicle. Do not program product while driving or while in motion. When
adjusting settings, stop in a safe and legal manner before doing such operations. Hyndsight Vision Systems, Inc. products
are designed for use in outdoor activities. While using your Hyndsight product, safety rules must be followed to prevent
accidents that can result in injury or death to yourself and/or others. Distractions can be dangerous and result in an accident
in which you or others could be injured. Please do not solely rely on screen image alone. No technology is a replacement
for your attentiveness. Do not disassemble the Camera or Monitor; doing so will void warranty. Do not attempt to remove
the internal, non-replaceable battery in the Camera or the Monitor; doing so will void warranty. Do not expose the product
to abnormal conditions such as extreme heat or humidity or prolonged sun exposure. When disposing of the unit, have
the batteries removed and recycled by a professional waste electronics treatment provider. Do not subject unit to strong
impact. Do prevent the Camera and Monitor from falling. Do not submerge the Camera or Monitor in water. Though Camera
and Monitor are buoyant, they are not life saving devices and are not guaranteed to float when mounting brackets are at-
tached. Hyndsight Vision Systems, Inc. is not responsible for loss or damage due to mounting bracket failure. Do not subject
unit to prolonged exposure to rain, snow, and other outside environments. Do charge the units indoors in dry conditions. Do
not charge the units around water or during rain when unit is installed outdoors. Doing so may cause electrical shock and/or
injury to you and/or the device. Sunglasses with polarized lenses may impair the visibility of the display. This monitor is not
intended to be used as a medical monitor and its use should not replace proper adult supervision. You should check your
child’s activity at regular intervals as this monitor will not alert parents to the silent activities of a child. Strangulation Hazard
- Children have strangled in cords. Keep cords out of reach of children.
6CAUTION
In order to prevent improper operation of the AC Adaptor, please read the user manual carefully. For your safety, please use
only the AC Adaptor provided. The manufacturer will not be responsible for any losses caused by converters and chargers
not provided by the manufacturer. IMPORTANT Please use only the socket match with the AC Adaptor. Use of improper
socket may cause electrical and fire damage. Only charge the Camera and Monitor in dry environments.
Charging the Camera and/or Monitor in the rain or in a wet environment may cause electrical shock, fire, personal injury and/
or product destruction. Improper use of the Camera and/or Monitor and accessories will void the warranty.
7
CARE INSTRUCTIONS
• If wet, dry unit completely before putting away.
• If unit is exposed to salt water, rinse with clean water and allow to dry completely before putting away.
• Make certain charging ports are securely sealed before exposing camera or monitor to water, snow,
and other precipitation.
• Do not use paint thinner or rubbing alcohol to clean unit.
• Store at room temperature in a dry environment out of direct sunlight to maximize the life of the product.
8KIT CONTENTS
1 Recording Monitor with 4GB Internal Memory
1 Recording Camera
2 Flush Mounting Brackets
2 USB Chargers
2 Antennas
1 Cleaning Cloth
1 Custom Padded Carrying Case
1 Instructions for use
MicroSD card not included for camera*
*MicroSD card not included for camera. For best results, use up to a 32GB card, generic brands not recommended.
9
OVERVIEW
Top Row (left to right): Signal strength, Camera being viewed, Scan
ON, MicroSD card inserted, Mirror mode (F when forward mode),
Monitor recording, Monitor overwrite enabled, Camera recording,
Camera overwrite enabled, Monitor battery life, Camera battery life
Bottom Row: Date/Time stamp
Buttons: Power Light (green when on, red when charging), Power
button, Back or Menu button, Select or Zoom shortcut, Left/Down
and Record shortcut, Right/Up and Monitor Playback shortcut
Power Button Power Light
Pair Button
Antenna
Charging Port
Threaded Mount
MicroSD Slot
On the back of the camera, in the same location as the charging port, is
a small slot for the MicroSD card. The card should be inserted with the
bump upward and slotted end going in first. Push the SD card into the
slot until it cannot go any further. It will lie flush with the charging port. The
SD card will remain firmly inserted into the camera unless you choose to
remove. To remove, push on the card, and it will eject from the slot so
you can download the video content.
10 CHARGING
Fully charge both devices before using. Either charger can be used with the camera or the monitor.
To Charge CAPTURE
• Connect the USB cable to the Wall Charger.
• Firmly insert the straight jack into the Camera. Repeat for Monitor.
• Plug the Wall Chargers into a wall outlet.
• Red light appears when charging. Red light turns off when charge is complete (4-5 hours).
*Optional hardwiring is available for use where USB or AC connections are unavailable.
Indice
