IBM 8672-26x Manuale utente
Installation Guide
®
Go to the Server Support
flow chart
Cable the appliance
server
Start the appliance
server
Install the appliance
server in the rack
cabinet, if required
Did the
appliance
server start
correctly?
Ye s
No
Configure the
appliance server
Did configuration
complete?
System is ready to use.
Go to the Server Support
flow chart to register
and profile your server.
No
Ye s
Install options:
• Drives
• Microprocessors
• Adapters
• Memory
xSeries Hosting Appliance
(8672-26x)
Welcome. . .
Thank you for buying an
IBM server xSeries Appliances
server.
This
contains information for setting
up and configuring your
server.
You can find the most
current information about your
server on the IBM Web site at:
http://www.ibm.com/pc/support
Installation Guide
appliance
also
Server Support
After you register and profile, you will be able to:
•Diagnose problems using the IBM Online Assistant
•Participate in the IBM discussion forum
•Receive e-mail notifications of technical updates
related to your profiled products
Register at:
Profile at:
http://www.ibm.com/pc/register
http://www.ibm.com/pc/support
Register and profile your server
Ye s
No
No
Phone an
IBM HelpCenter
Use the troubleshooting
information provided with
your server to determine
the cause of the problem
and the action to take.
Flash the latest levels of BIOS,
service processor, diagnostics,
and RAID code.
You can download this code at:
http://www.ibm.com/pc/support
No
No
Ye s
Ye s
Ye s
Check all cables for loose connections
and verify that all optional devices you
installed are on the ServerProven list.
You can view the ServerProven list at:
®
http://www.ibm.com/pc/compat
Server working
properly?
Problem
solved?
Problem
solved?
Problem
solved?
You can view the HelpCenter phone
numbers in the Support Phone List at:
®
http://www.ibm.com/pc/support
IBM Eserver xSeries Appliances
Installation Guide for xSeries Hosting
Appliance
Note:
Before using this information and the product it supports, be sure to read the general information in “Product warranty and
notices” on page 45.
First Edition (April 2002)
© Copyright International Business Machines Corporation 2002. All rights reserved.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.
Safety
Before installing this product, read the Safety Information.
Antes de instalar este produto, leia as Informações de Segurança.
Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.
Læs sikkerhedsforskrifterne, før du installerer dette produkt.
Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.
Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.
Avant d’installer ce produit, lisez les consignes de sécurité.
Vor der Installation dieses Produkts die Sicherheitshinweise lesen.
Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.
Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.
Antes de instalar este produto, leia as Informações sobre Segurança.
© Copyright IBM Corp. 2002 iii
Antes de instalar este producto, lea la información de seguridad.
Lässäkerhetsinformationen innan du installerar den här produkten.
Statement 1:
DANGER
Electrical current from power, telephone, and communication cables is
hazardous. To avoid a shock hazard:
vDo not connect or disconnect any cables or perform installation,
maintenance, or reconfiguration of this product during an electrical storm.
vConnect all power cords to a properly wired and grounded electrical outlet.
vConnect to properly wired outlets any equipment that will be attached to
this product.
vWhen possible, use one hand only to connect or disconnect signal cables.
vNever turn on any equipment when there is evidence of fire, water, or
structural damage.
vDisconnect the attached power cords, telecommunications systems,
networks, and modems before you open the device covers, unless
instructed otherwise in the installation and configuration procedures.
vConnect and disconnect cables as described in the following table when
installing, moving, or opening covers on this product or attached devices.
To connect:
1. Turn everything OFF.
2. First, attach all cables to devices.
3. Attach signal cables to connectors.
4. Attach power cords to outlet.
5. Turn device ON.
To disconnect:
1. Turn everything OFF.
2. First, remove power cords from outlet.
3. Remove signal cables from connectors.
4. Remove all cables from devices.
iv IBM Eserver xSeries Appliances: Installation Guide for xSeries Hosting Appliance
Statement 2:
CAUTION:
When replacing the lithium battery, use only IBM Part Number 33F8354 or an
equivalent type battery recommended by the manufacturer. If your system has a
module containing a lithium battery, replace it only with the same module type
made by the same manufacturer. The battery contains lithium and can explode if
not properly used, handled, or disposed of.
Do not:
vThrow or immerse into water.
vHeat to more than 100 C (212 F)
vRepair or disassemble
Dispose of the battery as required by local ordinances or regulations.
Statement 3:
CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or
transmitters) are installed, note the following:
vDo not remove the covers. Removing the covers of the laser product could
result in exposure to hazardous laser radiation. There are no serviceable parts
inside the device.
vUse of controls or adjustments or performance of procedures other than those
specified herein might result in hazardous radiation exposure.
DANGER
Some laser products contain an embedded Class 3A or Class 3B laser diode.
Note the following. Laser radiation when open. Do not stare into the beam,
do not view directly with optical instruments, and avoid direct exposure to
the beam.
Statement 4:
Safety v
≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs)
CAUTION:
Use safe practices when lifting.
Statement 5:
CAUTION:
The power control button on the device and the power switch on the power
supply do not turn off the electrical current supplied to the device. The device
also might have more than one power cord. To remove all electrical current from
the device, ensure that all power cords are disconnected from the power source.
1
2
Statement 8:
vi IBM Eserver xSeries Appliances: Installation Guide for xSeries Hosting Appliance
CAUTION:
Never remove the cover on a power supply or any part that has the following
label attached.
Hazardous voltage, current, and energy levels are present inside any component
that has this label attached. There are no serviceable parts inside these
components. If you suspect a problem with one of these parts, contact a service
technician.
Safety vii
viii IBM Eserver xSeries Appliances: Installation Guide for xSeries Hosting Appliance
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali IBM Server
IBM
IBM 88728RU Manuale utente
IBM
IBM Power System AC922 Manuale utente
IBM
IBM BladeCenter HS22V Manuale
IBM
IBM HS21 - BladeCenter - 8853 Manuale utente
IBM
IBM 8647 - Eserver xSeries 225 Manuale utente
IBM
IBM iDataPlex dx360 M4 Manuale utente
IBM
IBM System x3650 M3 4255 Manuale utente
IBM
IBM 4367BDU Manuale utente
IBM
IBM x3500 - System - 7977 Manuale utente
IBM
IBM BladeCenter PN41 Manuale utente
IBM
IBM 8853L6U Manuale utente
IBM
IBM S/390 Multiprise 3000 Manuale utente
IBM
IBM 88701RX Manuale utente
IBM
IBM xSeries 335 Manuale utente
IBM
IBM System Storage TS7650G 3958 DD4 Manuale utente
IBM
IBM x3550 - System - 7978 Manuale utente
IBM
IBM xSeries 235 Istruzioni operative
IBM
IBM 9040-MR9 Manuale utente
IBM
IBM Power System AC922 Manuale utente
IBM
IBM PC Server 520 Manuale di istruzioni
