not dismount, extrude and pink the batteries or make the external connection point short
circuit, and do not expose them in the environment over 60°C. Never throw them into fire or
water. Please do not try to open or repair the batteries, and be sure to reasonably deal with
the flat batteries and do not put the flat batteries, the circuit boards that may include the
batteries and other components with other wastes. For relevant battery recovery, please
contact the local waste recovery and treatment mechanism.
If what you bought is the chassis, besides carefully read the installation description
attached with the cabinet products and get known about the special warning notices and
installation process, you must abide by the following preventive measures to guarantee the
cabinet to be stable and safe:
Warning 10: Before installing equipment in the chassis, please install front and side
supporting feet on the independent chassis; for cabinet connecting with other chassis, it shall
install the front supporting foot first. If you fail to install correspondingly the supporting
foot before installing equipment in the chassis, it may cause the cabinet to turn over in some
cases, and thus may cause personal injury. Therefore, it is necessary to install supporting
feet before installing equipment in the chassis. After installing the equipment and other
components in the chassis, it can only pull out one component from the cabinet through its
sliding component at one time. Pulling out several components at the same time may lead the
cabinet to turn over and cause serious personal injury.
Warning 11: Please do not move the chassis. Considering the height and weight of the
chassis, at least two people are needed to complete its movement.
Warning 12: Declaration
The product is Grade A product, and in the living environment, it may cause radio
interference. In such case, it may need the user to take feasible measures for the interference.
Notes: in order to help you use the equipment, the following considerations can help avoid the
occurrence of problems that may damage the components or cause data loss:
1. In case of the following cases, please unplug the power line plug of products from the
power socket and contact the customer service department of Inspur:
- The power cables, extended cables or power plugs are damaged.
- The products get wet by water.
- The products have fallen off or been damaged.
- Objects fall into the products.
- When operating according to the operation instructions, the products cannot function
normally.
2. If the system becomes damp, please treat it according to the following steps:
- Switch off the power supplies of the system and the equipment, disconnect them with the
