Page 4 of 18 Aug 08
The Memory parameter specifies which Memory Data Items are displayable on the bottom of
the Data Page. There are seven possible Memory Data Items: Maximum, Minimum, Average,
Last, Date, Time, and Label. To specify whether a Memory Data Item is enabled or not,
toggle the associated character in the parameter string: MMALDTL. If the character is
displayed, the associated Memory Data Item is enabled. If ‘-‘ is displayed, the associated
Memory Data Item is disabled. For example, if MMA---- is displayed, Maximum, Minimum,
and Average will be the only Memory Data Items displayable on the bottom of the Data
Page.
.
Memory Locations
The M Locs parameter specifies the number of Memory Locations available for memory
storage. M Locs can be set between 1 and 100.
Note: The only purpose of the Memory and M Locs parameters is to reduce the amount
of information to scroll through when viewing Memory data on the Data Page.
Revision Page
To display the revision page, press the Right arrow key when Units is the highlighted
parameter.
To return to Setup Page #1, press the Left arrow key.
Setup Page #2
