Integra MEDIAJET Manuale utente
103956_V02_OI_Connection_Kit_LINX_bottom.docx 1/3 13. May 2019
MEDIAJET –Connection Kit for inkjet printer LINX
(bottom print)
Instructions V02 for bottom print installation
Document Change History
Vers.
Status:
Date:
Change:
V00
Released
15.10.2012
Document issued.
V01
Released
12.10.2018
New image, terms unified.
V02
Released
10.05.2019
Adaptions for printhead MK11.
Table of Contents
1Introduction------------------------------------------------------------------------------------------------------ 1
2Required Accessories and Documentation ----------------------------------------------------------- 1
3Mount printhead onto MEDIAJET------------------------------------------------------------------------- 2
4Imprint------------------------------------------------------------------------------------------------------------- 3
1 Introduction
This document describes installation and connection of the LINX inkjet printhead (bottom print) to
the MEDIAJET (MJ) dish filler. The following LINX types are supported:
LINX 4900 (discontinued), printhead MK7
LINX 5900 (discontinued), printhead MK7
LINX CJ400 (discontinued), printhead MK11
LINX 89xx, printhead MK11
Before starting with the installation, please carefully read MJ and LINX operating instructions. Please
note that MJ units manufactured before Mai/June 2010 (serial numbers below 10310372/11310129)
are not compatible with LINX inkjet printers for bottom print. Connection kits manufactured before
May 2019 are not compatible with printhead MK11.
2 Required Accessories and Documentation
The components listed below are required to connect the inkjet printer to MEDIAJET.
Components available from INTEGRA Biosciences:
MEDIAJET Dish Filler (Part no.
103005/103006/113000/113001/113002)
MJ Operating Instructions
(Part no. 103950)
Connection kit (Part no. 113840) for LINX
(bottom print), consisting of:
1Flange
2Disc without or with slot
3Hexagon screw M5x16 (3x)
4Screw cap (2x)
5Tube
6Interface cable MJ to LINX (113853)
This instructions for installation.
1
2
3
4
5
6
103956_V02_OI_Connection_Kit_LINX_bottom.docx 2/3 13. May 2019
3 Mount printhead onto MEDIAJET
Remove the two plastic screw caps and remove the
dummy cover on the rotor slide plate.
Install the new disc with slot (2).
Cover the screws with the screw caps (4).
Dismantle the bottom plate of the MEDIAJET.
The slot position of the MK11 printhead is slightly offset
compared to the MK7.
Mount the flange (1) on the tube (5), so that the slots of
the disc (2) and the printhead fit on top of each other.
The tube with the flange must be mounted with 3
Hexagon screws M5x16mm (3) at the correct position in
the slotted hole of the flange:
Printhead MK7
Printhead MK11
counterclockwise
(ccw) offset.
Clockwise (cw) offset.
Note:
Please mind the positioning of the tube.
103956_V02_OI_Connection_Kit_LINX_bottom.docx 3/3 13. May 2019
Remove the round pre-cut part from the bottom plate.
Remount the bottom plate.
Hang the printhead in the tube (5), it is held in the correct position by its screw:
Printhead MK7
Printhead MK11
Upper position
Lower position
Connect the LINX printer with the MEDIAJET using the interface cable provided.
4 Imprint
© 2019 INTEGRA Biosciences AG
All rights relating to this documentation reserved. INTEGRA Biosciences AG especially reserves the
rights of duplication, processing, translation and display format. Any reproduction of parts or the
entire documentation, or storage thereof on electronic media, or processing or disseminationthereof,
requires the prior written consent of INTEGRA Biosciences AG.
Manufacturer
INTEGRA Biosciences AG
CH-7205 Zizers, Switzerland
T +41 81 286 95 30
F +41 81 286 95 33
info@integra-biosciences.com
http://www.integra-biosciences.com
Altri manuali per MEDIAJET
2
Indice
Altri manuali Integra Attrezzature da laboratorio
Integra
Integra MINI 96 Manuale utente
Integra
Integra CELLROLL Manuale utente
Integra
Integra ASSIST PLUS Manuale utente
Integra
Integra MEDIAJET Manuale utente
Integra
Integra Fireboy Plus 144000 Manuale utente
Integra
Integra Evolve 3011 Manuale utente
Integra
Integra Cusa Excel Manuale utente
Integra
Integra WELLJET 5000 Manuale utente
Integra
Integra DOSE IT Manuale utente
Integra
Integra WELLJET 5000 Manuale utente
Integra
Integra ASSIST PLUS Manuale utente
Integra
Integra MEDIAJET Manuale utente
Integra
Integra ASSIST PLUS Manuale utente
Integra
Integra VIAFLO 4011 VIAFLO 4012 Manuale utente
Integra
Integra VIAFLO 96 6000 Manuale utente
Integra
Integra D-ONE Manuale utente
Integra
Integra VACUSIP Manuale utente
Integra
Integra VIAFLO Manuale utente
Integra
Integra VIAFLO ASSIST 4500 Manuale utente
Integra
Integra MINI 96 Manuale utente
