Intel SR870BN4 - Server Platform - 0 MB RAM Manuale utente
Intel® SR870BN4 Server System
Quick Start Guide
Order Number: A67044-003
This guide contains asic instructions for setting up the system and accessing
the Product Guide from the CD.
Copyright © 2000 - 2003 Intel Corpor tion. All rights reserved. No p rt of this document m y be copied, or reproduced in
ny form, or by ny me ns without prior written consent of Intel.
Intel Corpor tion (Intel) m kes no w rr nty of ny kind with reg rd to this m teri l, including, but not limited to, the implied
w rr nties of merch nt bility nd fitness for p rticul r purpose. Intel ssumes no responsibility for ny errors th t m y
ppe r in this document. Intel m kes no commitment to upd te nor to keep current the inform tion cont ined in this
document.
This equipment h s been tested nd found to comply with the limits for Cl ss A digit l device, pursu nt to p rt 15 of the
FCC Rules. These limits re designed to provide re son ble protection g inst h rmful interference when the equipment is
oper ted in commerci l environment. This equipment gener tes, uses, nd c n r di te r dio frequency energy nd, if not
inst lled nd used in ccord nce with the instruction m nu l, m y c use h rmful interference to r dio communic tions.
Oper tion of this equipment in residenti l re is likely to c use h rmful interference in which c se the user will be
required to correct the interference t his own expense.
Intel is registered tr dem rk of Intel Corpor tion or its subsidi ries in the United St tes nd other countries.
† Other n mes nd br nds m y be cl imed s the property of others.
iii
Contents
SR870BN4 Specific tions.....................................................................................................4
Regul tory Specific tions nd Discl imers............................................................................5
Decl r tion of the M nuf cturer or Importer.................................................................5
S fety Compli nce................................................................................................................5
Electrom gnetic Comp tibility (EMC)...........................................................................5
FCC Electrom gnetic Comp tibility Notice (USA).........................................................6
Electrom gnetic Comp tibility Notices (Intern tion l)...................................................7
Removing the Server from the Box .......................................................................................8
Selecting Site.....................................................................................................................8
Checking Power Cords..........................................................................................................9
Connections nd Controls...................................................................................................11
Connecting the Monitor, Keybo rd, nd Mouse ..................................................................14
Powering On the Server for the First Time..........................................................................14
Mounting the LS240 Device................................................................................................15
The SR870BN4 Resource CD.............................................................................................16
The Intel® SR870BN4 Server System Product Guide.........................................................16
Warnings.............................................................................................................17
W rning: English (USA) .....................................................................................................17
AVERTISSEMENTS : Fr nç is..........................................................................................19
WARNUNG: Deutsch..........................................................................................................21
AVVERTENZA: It li no......................................................................................................23
ADVERTENCIA: Esp ñol....................................................................................................25
4 SR870BN4 Server System
Quick St rt Guide
SR870BN4 Specifications
Ta le 1. SR870BN4 Server Physical Specifications
Characteristic Specification
Height 178 mm (6.9 inches, 4U)
Width 445 mm (17.5 inches)
Depth 711 mm (28.0 inches)
Weight (m x.) 48 kg (106 lbs.)1
Required front cle r nce 76 mm cm (3 inches)
Required re r cle r nce 152 mm (6 inches)
Required side cle r nce 25 mm (1 inch)
He t Dissip tion 1500 W (5,100 BTU/hr)
1 The system weight listed bove is n estim te for fully configured system nd will v ry depending on number of
peripher l devices nd dd-in c rds s well s the number of processors nd DIMMs inst lled in the system.
OM12884
Figure 1. SR870BN4 Server
WARNING
Use all four handles for a minimum two-person lift. Serious personal
injury can take place when lifting the product that can, when fully
configured, weigh as much as 106 lbs 48 kg).
SR870BN4 Server System 5
Quick St rt Guide
Regulatory Specifications and Disclaimers
Declaration of the Manufacturer or Importer
We hereby certify that this product is in compliance with European Union EMC Directive
89/33 /EEC, using standards EN55022 (Class A) and EN55024 and Low Voltage Directive
73/23/EEC, Standard EN 0950.
Safety Compliance
USA UL 1950 – 3rd Edition/CSA 22.2. No. 950-M93
C n d UL certified – 3rd Edition/CSA 22.2. No. 950-M93 for C n d (product be rs
the single UL m rk for U.S. nd C n d )
Europe Low Volt ge Directive, 73/23/EECTUV/GS to EN60950 2nd Edition with
Amendments, A1 = A2 + A3 + A4
Intern tion l TUV/CB to IEC 60950 3rd Edition TUV/CB - EN60 950 2nd Edition +
Amendment 1-4TUV/CB - EMKO-TSE (74-SEC) 207/94 plus intern tion l
devi tions
Austr li n / New Ze l nd CB Report to IEC 60950, 3rd Edition plus Austr li n devi tions
Electromagnetic Compati ility (EMC)
USA: FCC CFR 47 P rt 2 nd 15, Verified Cl ss A Limit
C n d : IC ICES-003 Cl ss A Limit
Europe: EMC Directive, 89/336/EEC
• EN55022, Cl ss A Limit, R di ted & Conducted Emissions
• EN55024, ITE Specific Immunity St nd rd
• EN61000-4-2, ESD Immunity (Level 2 Cont ct Disch rge, Level 3 Air
Disch rge)
• EN61000-4-3, R di ted Immunity (Level 2)
• EN61000-4-4, Electric l F st Tr nsient (Level 2)
• EN61000-4-5, AC Surge
• EN61000-4-6, Conducted RF
• EN61000-4-8, Power Frequency M gnetic Fields
• EN61000-4-11, Volt ge Dips nd Interrupts
• EN61000-3-2, Limit for H rmonic Current Emissions
• EN61000-3-3, Volt ge Flicker
J p n: VCCI Cl ss A ITE (CISPR 22, Cl ss A Limit) IEC 1000-3-2 Limit for H rmonic
Current Emissions
Austr li /New Ze l nd: AS/NZS 3548, Cl ss A
T iw n: BSMI Approv l, Cl ss A
Kore : RRL Approv l, Cl ss A
Russi : GOST Approved
Intern tion l: CISPR 22, Cl ss A Limit
6 SR870BN4 Server System
Quick St rt Guide
FCC Electromagnetic Compati ility Notice (USA)
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operating in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference. In this
case, the user is required to correct the interference at their own expense. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on; the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the grantee of this device could void the
user’s authority to operate the equipment. The customer is responsible for ensuring compliance of
the modified product.
FCC Declaration of Conformity
Product Type: SR870BN4
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
For questions related to the EMC performance of this product, contact:
Intel Corporation
2800 Center Drive
DuPont, WA 98327 USA
Laser Compliance Notice
Intel products that use laser technology comply with Class 1 laser requirements.
Class 1 Laser Product
Luokan 1 Laserlaite
Klasse 1 Laser Apparat
Laser Klasse 1
SR870BN4 Server System 7
Quick St rt Guide
✏
NOTE
Class A device definition: If a Class A device is installed within this
system, then the system is to be considered a Class A system. In this
configuration, operation of this equipment in a residential area is likely to
cause harmful interference.
Electromagnetic Compati ility Notices (International)
Europe (CE Declaration of Conformity)
This product has been tested in accordance too, and complies with the Low Voltage Directive
(73/23/EEC) and EMC Directive (89/33 /EEC). The product has been marked with the CE Mark
to illustrate its compliance.
Japan EMC Compati ility
English translation of the notice above:
This is a Class A product based on the standard of the Voluntary Control Council for Interference
by Information Technology Equipment (VCCI). If this equipment is used in a domestic
environment, radio disturbance may arise. When such trouble occurs, the user may be required to
take corrective actions.
ICES-003 (Canada)
Cet appareil numérique respecte les limites bruits radioélectriques applicables aux
appareils numériques de Classe A prescrites dans la norme sur le matériel brouilleur:
“Appareils Numériques”, NMB-003 édictée par le Ministre Canadian des
Communications.
English translation of the notice above:
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital
apparatus set out in the interference-causing equipment standard entitled “Digital Apparatus,”
ICES-003 of the Canadian Department of Communications.
8 SR870BN4 Server System
Quick St rt Guide
BSMI (Taiwan)
The BSMI Certification number and the following warning is located on the product safety label
which is located visibly on the external chassis.
Removing the Server from the Box
Carefully unpack the server. Be sure to use two people to lift the server. Do not attempt to lift or
move the server by the handles on the power supplies. If you need to move the server from one
location to another, use a hand-truck or other mechanical assist unit.
WARNINGS
AVOID INJURY: To avoid personal injury when unpacking the server,
use only a mechanical assist unit to lift it off the shipping pallet. The
maximum server configuration weighs 48 kg 106 lbs.).
Selecting a Site
The server operates reliably within normal office environmental limits. Select a site that meets
these criteria:
• Near a properly earthed, grounded three-pronged power outlet
In the United States and Canada: a NEMA-compliant, 110-208 V∼ outlet rated for 15 amps
In other geographic areas: a properly grounded, earthed outlet in accordance with the local
electrical authorities and electrical code of the region
• Clean and relatively free of excess dust
• Well ventilated and away from sources of heat, with the ventilating openings on the server
kept free of obstructions
• Away from sources of vibration or physical shock
• Isolated from strong electromagnetic fields and noise caused by electrical devices such as
elevators, copy machines, air conditioners, large fans, large electric motors, radio and TV
transmitters, and high-frequency security devices
SR870BN4 Server System 9
Quick St rt Guide
CAUTION, ESD Precautions
Electrostatic discharge (ESD) can damage disk drives, add-in boards, and other
parts. This server can withstand normal levels of environmental ESD.
However, we recommend doing all procedures in this guide only at an
ESD-protected workstation. If one is not available, you can provide some ESD
protection by wearing an anti-static wrist strap attached to chassis ground of the
server when handling components (e.g., any unpainted metal surface).
CAUTION
Grounded outlet: Make sure that the power service connection is through a
properly grounded outlet.
Temperature: The range of temperatures in which the server operates
when installed in an equipment rack, must not go below 5 °C (41 °F) or rise
above 35 °C (95 °F). Extreme fluctuations in temperature can cause a
variety of problems in your server.
Ventilation: The equipment rack must provide sufficient airflow to the
front of the server to maintain proper cooling. The rack must also include
ventilation sufficient to exhaust a maximum of 1500 W (5,100 BTU/hr) for
the server. The rack selected and the ventilation provided must be suitable
to the environment in which the server will be used.
Checking Power Cords
WARNING
The Power button on the front control panel of the server does not
completely remove AC power. To completely remove AC power from
the server, you must unplug both AC power cords from the system or
from the wall outlet. Unplugging the cords removes the +12 Volt
standby power that is present when the server is powered down.
WARNING
Do not attempt to modify or use an AC power cord that is not the exact
type required. You must use a power cord that meets the following
criteria:
1. Rating: For U.S./Canada cords must be UL Listed/CSA Certified,
16/3, 75C type, VW-1, SJT/SVT, with NEMA 5-15P or
NEMA 6-15P attachment plug and IEC 320 C13 input power
connector rated 15 amps. For outside U.S./Canada cords must be
flexible harmonized <HAR>) rated 250V, 1.0 mm minimum
conductor size with IEC 320 C13 input power connector and rated
for no less than 10 amps.
10 SR870BN4 Server System
Quick St rt Guide
2. AC Attachment Connector, wall outlet end for outside U.S./Canada:
The AC wall attachment plug should be a three conductor
grounding type, rated at 125 V, 15 amps and must be for the
configuration of the specific region or country. The AC wall
attachment plug must bear at least an accepted safety agency
certification mark for the specific region or country.
3. Input Power Connector, server end: The connectors that plug into
the AC receptacles on the server must be an IEC 320, sheet C13,
type female connector and are rated for 125 V/250 V, 15 A.
✏
NOTES
Surge Suppressor Recommendations: In geographic regions that are
susceptible to electrical storms, we highly recommend that you plug the
server into a surge suppressor.
EMI Information: For information about complying with electromagnetic
interference regulations, see “Electromagnetic Compatibility” in the
Intel® SR870BN4 Server System Product Guide.
Altri manuali per SR870BN4 - Server Platform - 0 MB RAM
2
Indice
Altri manuali Intel Server
Intel
Intel GS-SR168 Guida utente
Intel
Intel SR1500 - AXXMINIDIMM DDR-2 RAID Controller Cache... Manuale utente
Intel
Intel ISP1100 - Server Platform - 0 MB RAM Manuale utente
Intel
Intel SR2600URLXNA Guida
Intel
Intel SR1550AL - Server System - 0 MB RAM Manuale utente
Intel
Intel S7000FC4UR - Server System - 0 MB RAM Manuale utente
Intel
Intel SR1600UR - Server System - 0 MB RAM Manuale utente
Intel
Intel MFSYS25 - AXXPSU 1000W Power Supply Module Manuale utente
Intel
Intel S2600CW Manuale utente
Intel
Intel R1304BTLSFAN Guida all'installazione
Intel
Intel R1000BB Family Manuale utente
Intel
Intel SR1600UR - Server System - 0 MB RAM Manuale utente
Intel
Intel H2000G Series Manuale utente
Intel
Intel SR2612UR - Server System - 0 MB RAM Manuale utente
Intel
Intel SR1680MV - Server System - 0 MB RAM Manuale utente
Intel
Intel SR1630BC - Server System - 0 MB RAM Guida alla configurazione
Intel
Intel SR1625UR - Server System - 0 MB RAM Manuale utente
Intel
Intel S2600TP series Manuale utente
Intel
Intel M50FCP2UR Manuale utente
Intel
Intel R2000WF series Guida alla configurazione
