Intermec Transaction Manager 9560 Manuale utente

nugget code39

helconital

9560 Transaction Manager

P/N 059724-005

User’s

Manual

nugget code39

helconital

IntermecCorporation

6001 36th Avenue West

P.O. Box 4280

Everett, WA 98203-9280

U.S. service and technical support: 1-800-755-5505

U.S. media supplies ordering information: 1-800-227-9947

Canadian service and technical support: 1-800-688-7043

Canadian media supplies ordering information: 1-800-268-6936

Outside U.S. and Canada: Contact your local Intermec service supplier.

The information contained herein is proprietary and is provided solely for the purpose of allowing

customers to operate and/or service Intermec manufactured equipment and is not to be released,

reproduced, or used for any other purpose without written permission of Intermec.

Information and specifications in this manual are subject to change without notice.

1996 by Intermec Corporation

The word Intermec, the Intermec logo, JANUS, IRL, TRAKKER, Antares, Duratherm, Precision

Print, PrintSet, Virtual Wedge, and CrossBar are either trademarks or registered trademarks of

Intermec Corporation.

Throughout this manual, trademarked names may be used. Rather than put a trademark (or )

symbol in every occurrence of a trademarked name, we state that we are using the names only in an

editorial fashion, and to the benefit of the trademark owner, with no intention of infringement.

nugget code39

helconital

iii

Manual Change Record

This page records changes to the manual. The manual was released at Rev. A.

Revision Date Description of Change

001 4/93 Illustrations in Chapters 1 and 2 were revised to reflect the

redesigned housing.

The mounting plate template was deleted from the appendix.

The Table of Contents and Index reflect changes to each chapter.

002 9/93 Two bar codes in Chapter 4 were corrected.

003 8/94 Complete rewrite of manual to add new product features and

make the manual easier to use.

004 3/7/95 Corrected several bar codes in Chapter 7 and replaced entire

chapter. Issued interim update P/N 062755-001 for updating

the existing -003 manuals.

Added note about magnetic card reader data formats to page

4-9.

005 12/96 Reformatted to fit 8.5 x 11 page size.

Replaced “End Accumulate” bar codes with "Exit Configuration

and Save” bar codes.

Added NUL (%U) to several bar codes in Chapter 7 for

disabling configuration settings.

Corrected bar codes with spaces for new version of font.

Contents

Before You Begin xv

Warranty Information xv

Safety Summary xv

Warnings, Cautions, and Notes xvi

About This Manual xvi

Other Intermec Manuals xx

Getting Started

Roadmap 1-3

The 9560 Transaction Manager 1-4

9560 Component Options 1-5

Optional Input Devices 1-6

Data Formats and Programming 1-6

Memory 1-6

Bar Code Symbologies 1-7

Communications 1-7

Status Beeps 1-7

Preparing to Install the 9560

Getting Ready to Install the 9560 2-3

Determining a Mounting Location 2-4

Choosing Secured or Unsecured Wiring 2-5

Selecting External Devices 2-5

Choosing Input Devices 2-5

Attaching Wands and Scanners 2-5

Attaching Devices to the Terminal Plug 2-6

Installing the 9560 Without Input Devices 2-6

Unattended Scanning 2-6

Using the Sense Inputs 2-7

Using the Output Relays 2-9

Attaching Audio Output Devices 2-9

Connecting to a Data Collection System 2-10

Cable Interface Requirements 2-10

Null Modem Cable Diagram and Modem Connector Pin Assignments 2-11

Modem Cable Diagram and Terminal Connector Pin Assignments 2-12

9560 Transaction Manager User’s Manual

Connecting Directly to a Computer 2-13

Connecting to a Computer and Terminal 2-13

Connecting to a Port Concentrator or System Unit 2-14

Direct Wiring 2-16

Multi-drop Line Wiring 2-16

Meeting Power Supply Requirements 2-18

Installing the 9560

Overview of Installing the 9560 3-3

Routing Cables and Power Supply 3-5

Routing With Secured Wiring 3-6

Routing With Unsecured Wiring 3-7

Connecting External Devices 3-8

Connecting Input Devices 3-9

Connecting to Sense Inputs 3-9

Connecting to Output Relays 3-11

Connecting Audio Devices 3-12

Connecting to a Data Collection Host System 3-12

Attaching the Mounting Plate 3-13

Attaching the 9560 to the Wall 3-15

Starting and Operating the 9560

Starting the 9560 4-3

Starting the 9560 With the Magnetic Card Reader 4-4

Reading Bar Code Labels 4-5

Multiple-Read Labels 4-5

Regular Labels 4-5

Using the Slot Scanner 4-6

Bar Code Placement 4-6

Using the Magnetic Card Reader 4-7

Using a Wand 4-8

Using a Laser Scanner 4-9

Optimum Scanning 4-10

Contents

vii

Using the Keypad 4-11

Function Key Layout 4-12

Data Communications and Operating Options

Introduction to Data Communications 5-3

Data Communications in a Data Collection System 5-3

The ISO Data Communications Model 5-3

Physical Layer 5-4

Data Link Layer 5-4

Full-Duplex Protocols Versus Half-Duplex Protocols 5-5

Full-Duplex Devices Versus Half-Duplex Devices 5-5

The DLE Character and XON/XOFF Flow Control 5-5

Working With Protocols 5-6

Point-to-Point Protocol 5-6

Polling Mode D Protocol 5-7

Multi-drop Protocol 5-7

User-Defined and User-Defined Multi-drop Protocols 5-8

Tips for Defining Secure Protocols 5-8

Buffering Received Data 5-9

Communication Delays 5-9

Data Format Requirements 5-10

SOM Character (Start of Message) 5-10

Preambles and Postambles 5-10

EOR Characters (End of Record) 5-11

EOF Characters (End of File) 5-11

Record 5-11

Records per Block 5-11

EOM Characters (End of Message) 5-12

Error Checking 5-12

Displaying Data on the 9560 5-12

Types of Data Displayed 5-12

Display Settings and Formatting 5-13

Buffered Display 5-13

Transparent Display 5-13

Formatting the Display 5-13

Display Overflow 5-14

Displaying ASCII Control Codes 5-15

Displaying Data on a Terminal 5-15

Buffered Terminal Operation 5-16

Transparent Terminal Operation 5-17

9560 Transaction Manager User’s Manual

viii

Nonbuffered Full-Duplex Operation 5-18

Nonbuffered Half-Duplex Operation 5-18

Block Terminal Operation 5-18

Displaying International Character Sets 5-19

Using the Katakana Character Set 5-23

Entering Katakana Characters 5-25

Assigning a Function Key to Katakana and US-ASCII Character Sets 5-26

Kana Mode Character Tables 5-26

Ro-maji Mode Character Table 5-29

9560 Operating Modes and Command Types 5-31

Accumulate Mode 5-31

Full ASCII Mode 5-32

Command Types 5-32

Configuring the 9560

Specifying Configuration Parameters 6-3

Using Batch Configuration 6-10

Batch Configuration Example 6-10

Downloading Configuration Commands 6-11

Download Command Example 6-11

Using Prompting Configuration Mode 6-12

Entering Prompting Configuration Mode 6-12

Moving Around in Prompting Configuration Mode 6-13

Finding Help in Prompting Configuration Mode 6-14

Exiting Prompting Configuration Mode 6-14

Prompting Configuration Mode Example 6-14

Standard Display Prompts 6-16

Large-Type Display Prompts 6-21

Configuration Commands

Using the Configuration Commands 7-3

ADDR (Address, Multidrop) 7-4

AFF (Affirmative Acknowledgment) 7-5

Append Time to Data 7-6

Baud Rate 7-7

Beeper Volume 7-8

Contents

Character Set 7-9

Codabar 7-10

CODE 11 7-12

CODE 39 7-13

CODE 93 7-14

Code 128 7-15

Computer Response Required Mode (CRRM) 7-16

Data Bits 7-17

Display Setting 7-18

EOM (End of Message) 7-19

Full ASCII 7-20

Intercharacter Delay 7-21

Interface 7-22

Interleaved 2 of 5 (I 2 of 5) 7-23

IRL BAK (Bad Program Acknowledge) 7-24

IRL END (End of Program) 7-25

IRL EOF (End of File) 7-26

IRL EOP (End of Program Block) 7-27

IRL EOR (End of Record) 7-28

IRL PAK (Program Acknowledge) 7-29

IRL PSS (Program Statement Separator) 7-30

IRL RUN 7-31

IRL SOP (Start of Program Block) 7-32

Katakana 7-33

LRC (Longitudinal Redundancy Check) 7-36

NEG (Negative Acknowledgment) 7-37

Parity 7-38

POL (Poll) 7-39

Preamble A Required 7-40

Protocol 7-41

Records per Block 7-42

REQ (Request for Acknowledgment) 7-43

RES (Reset) 7-44

Resume IRL 7-45

Scanner Timeout 7-46

Scanner Operation 7-47

SEL (Select) 7-48

Select Terminal Mode 7-49

SOM (Start of Message) 7-50

Stop Bits 7-51

Trigger Event 7-52

Time in Seconds 7-53

Timeout Delay 7-54

Turnaround Delay 7-55

9560 Transaction Manager User’s Manual

2 of 5 (Two of Five) 7-56

UPC/EAN 7-57

XOFF 7-60

XON 7-61

Data Entry Commands

Using Data Entry Commands 8-3

Entering Data Entry Commands 8-4

Backspace 8-5

Capacity 8-5

Clear 8-6

Command 8-7

Command Override 8-7

Default Configuration 8-8

Delete Data 8-9

Enable Clock 8-10

Enter Accumulate 8-11

Enter Auto Trigger Mode 8-11

Enter Computer Response Required Mode (CRRM) 8-12

Enter Configuration Mode 8-12

Enter Display Editor 8-13

Enter Full ASCII Mode 8-13

Enter IRL Editor 8-14

Enter Prompting Configuration Mode 8-14

Enter Record 8-15

Exit Accumulate and Transmit 8-15

Exit Auto Trigger Mode 8-16

Exit Computer Response Required Mode (CRRM) 8-16

Exit Configuration Mode, Do Not Save Settings 8-17

Exit Configuration Mode, Save Settings 8-17

Exit Full ASCII Mode 8-18

Exit IRL Editor 8-18

Exit Program 8-19

Forward 8-19

High Beep 8-20

Laser Trigger 8-20

Laser Untrigger 8-21

LED/Relay Control 8-22

Low Beep 8-24

Preamble A 8-25

Preamble B 8-26

Postamble C 8-27

Indice

Altri manuali Intermec Lettore di codici a barre

Intermec

Intermec CN70 RFID Manuale utente

Intermec

Intermec ScanPlus 1802 Guida di riferimento

Intermec

Intermec IV6 Manuale utente

Intermec

Intermec 1009FF01 Manuale utente

Intermec

Intermec EasyCoder PX4i Manuale utente

Intermec

Intermec SR31T Manuale utente

Intermec

Intermec IF61 Manuale utente

Intermec

Intermec Sabre 1553 Manuale utente

Intermec

Intermec SG20 Manuale utente

Intermec

Intermec SR61T Manuale utente

Intermec

Intermec 700C Manuale

Intermec

Intermec 1280 Series Guida di riferimento

Intermec

Intermec Sabre 1553 Guida alla configurazione

Intermec

Intermec IP4 Manuale

Intermec

Intermec Sabre 1555 Manuale utente

Intermec

Intermec ScanPlus 1800 Manuale

Intermec

Intermec ScanPlus S Series Manuale utente

Intermec

Intermec SF61 Manuale utente

Intermec

Intermec ScanPlus 1802 Manuale utente

Intermec

Intermec SR61 Manuale utente

Intermec

Intermec SR60 Manuale utente

Intermec

Intermec SF51 Manuale utente

Intermec

Intermec SF61 Manuale utente

Intermec

Intermec SR30 Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente