ITL MON-2697-COM Manuale utente

Toll Free: +1 (866) 624-8309 www.itl-llc.com

Monitoring

System

For

ILS-2600/3600

MON

2697

COM

Front Matter

information, photographs, graphics, and other material (collectively, "the Content")

protected by copyright, and this manual and all accompanying hardware, software and

documentation are copyrighted. No part of this document may be photocopied or

reproduced by mechanical, electronic, or other means in any form without written consent

of ITL, LLC.

“International Tower Lighting, LLC”, ”ITL, LLC”, MON-2680-COM, MON-2697-COM,

MON-800, MON-805, MON-830, MON-920-LAN, MON-930, MON-940, MON-G930, ITL-

2697-COM, ITL-920-LAN, ITL-0930, ITL-0940, ITL-0950, ITL-G930, ADP OnSite, ADP

Lite, ADP Standard, and ADP Enterprise, and the ITL logo are all trademarks of ITL, LLC.

All other trademarks and brand names are the property of their respective proprietors.

Limited Warranty and Disclaimer

ITL, LLC guarantees that every MON-2697-COM monitoring system is free from physical

defects of material and workmanship under normal use for one (1) year from the date of

purchase. If the product proves defective during this warranty period, please contact ITL,

LLC in order to obtain a Return Authorization Number, RMA.

In no event shall ITL, LLC’s liability exceed the price paid for the product from direct,

indirect, special, incidental, or consequential damages resulting from the use of the

product, its accompanying software, or its documentation. ITL, LLC makes no warranty

or representation, expressed, implied, or statutory, with respect to its products or the

contents or use of this documentation and all accompanying software, and specifically

disclaims its quality, performance, merchantability, or fitness for any particular purpose

unless otherwise stated.

The technical documentation is being delivered to you AS-IS. ITL, LLC makes no

warranty as to its accuracy or use. Any use of the technical documentation or the

information contained therein is at the risk of the user. Documentation may include

technical or other inaccuracies or typographical errors. ITL, LLC reserves the right to

revise or update its products, software, or documentation without obligation to notify any

individual or entity.

Please send any comments regarding the manual to [email protected].

MON

2697

COM

Safety Warning

This equipment uses lethal voltages which can cause serious injury and/or death. Do not

attempt to service this equipment with line power applied.

Never rely on just one switch to power down a high voltage supply.Measure for voltages

using a voltmeter to ensure that power is off and has been completely removed.

Do not wear any jewelry when servicing this equipment. Gold and silver are excellent

conductors of electricity.

Battery Warning and Disposal

There is danger of explosion if the included sealed lead-acid battery is replaced

incorrectly. Only replace the battery with the same or equivalent type recommended by

the battery manufacturer. Dispose of used batteries according to the battery

manufacturer's instructions.

Do not incinerate, disassemble, or puncture the battery.

For questions or details please contact The Battery Council International at (312) 664-

6610, or your local waste agency.

MON

2697

COM

Table of Contents

Front Matter....................................................................................................................... 2

Copyright & Trademarks ................................................................................................ 2

Limited Warranty and Disclaimer ................................................................................... 2

Safety Warning .............................................................................................................. 3

Battery Warning and Disposal ....................................................................................... 3

List of Illustrations and Tables ........................................................................................... 5

Introduction........................................................................................................................ 6

Product Description ........................................................................................................... 6

Specifications .................................................................................................................... 6

Environment................................................................................................................... 7

Mechanical..................................................................................................................... 7

Electrical ........................................................................................................................ 7

Communication Module ................................................................................................. 7

Installation ......................................................................................................................... 8

Unpacking your Monitoring System ............................................................................... 9

Tools for Installation....................................................................................................... 9

Quick Installation Guide ................................................................................................. 9

1. Ethernet Connection ............................................................................................. 10

2. Modem Power and Battery Connections .................................................................. 10

3. Modem Power (5VDC) ............................................................................................. 11

Web Pages...................................................................................................................... 12

SNMP .............................................................................................................................. 14

1. Object Identifiers (OIDs) and Names ....................................................................... 14

System OIDs ............................................................................................................ 14

Product OIDs............................................................................................................ 15

Trap Setup OIDs ...................................................................................................... 16

MON-2697-COM Alarm OIDs................................................................................... 17

MON-2697-COM Configuration / Status OIDs.......................................................... 18

ILS-2600/2600 Beacon #1 … #4 OID Overview....................................................... 19

ILS-2600/2600 Beacon #1 Alarm OIDs .................................................................... 20

ILS-2600/2600 Beacon #1 Configuration OIDs ........................................................ 21

ILS-2600/2600 Beacon #1 Status OIDs ................................................................... 22

ILS-2600/2600 Beacon #1 Mode/PEC OIDs ............................................................ 23

Technical Support and Contact Info ................................................................................ 24

Contact Info ................................................................................................................. 24

RMA............................................................................................................................. 24

MON

2697

COM

List of Illustrations and Tables

Figure 1: MON-2697-COM Circuit Board Assembly .......................................................... 8

Figure 2: MON-2697-COM Ethernet Connection............................................................. 10

Figure 3: Modem power (12VDC) shown in red box. Backup battery input shown in yellow

box. .......................................................................................................................... 10

Figure 4: 5VDC modem power output. ............................................................................ 11

Figure 5: MON-2697-COM Web Login ............................................................................ 12

Figure 6: MON-2697-COM Alarm Page........................................................................... 13

Figure 7: System OIDs .................................................................................................... 14

Figure 8: Product OIDs.................................................................................................... 15

Figure 9: Trap Setup OIDs .............................................................................................. 16

Figure 10: MON-2697-COM Alarm OIDs......................................................................... 17

Figure 11: MON-2697-COM Configuration OIDs............................................................. 18

Figure 12: ILS-2600/3600 Beacon #1Alarm OIDs ........................................................... 20

Figure 13: ILS-2600/3600 Beacon #1 Configuration OIDs .............................................. 21

Figure 14: ILS-2600/3600 Beacon #1 Status OIDs ......................................................... 22

Figure 15: ILS-2600/3600 Beacon #1 Mode/PEC OIDs .................................................. 23

MON

2697

COM

Introduction

Congratulations, and thank you for choosing an ITL monitoring system.

We trust that ITL’s reputation for technical excellence, experience in product

development, commitment to our customers and testing will ensure your complete

satisfaction.

You have chosen one of the most technologically innovative monitoring systems for

monitoring tower lighting systems available on the market today. This product is the

result of many years of engineering with extensive input from field service personnel.

This manual covers MON-2697-COM monitoring system which can function as either

hardwired Ethernet or wireless monitoring system with the addition of a wireless modem.

Please consult ITL technical support for specific modem selections.

Please take the time to read and familiarize yourself with this manual. It contains the

information necessary to install, test and troubleshoot the MON-2697-COM monitoring

system or consult the Quick Installation Guide.

Product Description

ITL’s MON-2697-COM is designed to provide a complete monitoring solution for ILS-2600

and ILS-3600 LED tower lighting systems. The monitoring system’s rich set of features is

directly applicable to monitoring all aspects of these two LED lighting systems.

All MON-2697-COM controllers are SNMP enabled and support SNMP v1 and SNMP v2c

capabilities to allow for M2M communication. Additionally, the system has built-in web

pages to provide a more intuitive human interface and is supported by most web

browsers.

Both, hardwired Ethernet connection and wireless modem communication are also

supported.

Typical wireless applications include the use of a secure software tunnel provided by a

third party for communication between the MON-2697-COM (Agent) equipment and

network management system (NMS) or SNMP manager.

Specifications

MON

2697

COM

Environment

Temperature -40ºC to +55ºC

Humidity less than 95% relative humidity (non-

condensing)

Mechanical

Board Assembly Dimensions Height: 9.00” (229mm)

Width: 7.50” (191mm)

Depth w/o Modem: 1.50” (38.1mm)

Depth w/Modem: 3.00” (76.2mm)

Weight w/o Modem 1.4 lbs (0.620Kg) max

Weight with Modem 2.4 lbs (1.075Kg) max

Electrical

Input Power 120/240VAC at 60Hz, 12VA (max.)

Suppression 45 Joule, 275V, Input Power

23 Joule, 275V, Spare Relay

Spare Output Relay 120/230 VAC, 1 Amp, Form-C

Communication Module

Digi IX10

MON

2697

COM

Installation

The MON-2697-COM monitoring system installs directly on the interior door of the ILS-

2600 or ILS-3600 enclosure as indicated below.

Figure 1: MON-2697-COM Circuit Board Assembly

MON

2697

COM

Unpacking your Monitoring System

Please examine the shipping containers and their content thoroughly upon receipt and

report any potential shipping damage to the carrier.

Tools for Installation

The following tools are suggested for mounting of the MON-2697-COM monitoring

system.

Nut Driver and 9mm Socket

Quick Installation Guide

The quick start guide shows how to install the MON-2697 series monitoring system. The

guide provides only basic instructions to personnel familiar with these types of

installations. For more details, refer to this document or contact ITL technical support

staff.

Install MON-2697-COM to interior of ILS-2600/3600 enclosure door

Connect

o3 pin Phoenix style power connector

oRibbon cable (RS485 communication)

oEthernet cable for hardwire connection or modem w/antenna

Apply power to unit and observe functioning LEDs

Open web browser with above IP number, use ‘admin/Admin2017’ for default

username/password

Configure SNMP and basic network settings as needed via webpages

MON

2697

COM

Circuit Board

1. Ethernet Connection

2. Modem Power and Battery Connections

Observe polarity when connecting and disconnecting the battery. Note all battery

warnings in the Safety Warning section.

Observe polarity when connecting the modem power.

Figure 2: MON-2697-COM Ethernet Connection

Figure 3: Modem power (12VDC) shown in red box. Backup battery input shown in yellow

box.

Indice

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente