IUL HALOES CALIPER Manuale utente
CAT. No.
5000997
HALOES CALIPER
USER´S GUIDE
DOC. No. 997-05
HALOES CALIPER
INSTRUCTION
MANUAL
Copyright (C) 2016 IUL, S.A.
All rights reserved.
Doc. No. 997-05
Cat. No 5000997
INDEX
1. INTRODUCTION 1
2. TECHNICAL SPECIFICATIONS 2
3. INSTALLING AND STARTING UP THE INSTRUMENT 3
4. OPERATION AND USE OF THE CONTROLS 4
5. BEFORE NOTIFYING THE TECHNICAL SERVICE 5
USE OF THE MANUAL
All the letters in bold: A, B, C, etc. refers to the stages which must be carried out by the
operator. All the numbers: 1, 2, 3, etc. refers to the main illustration on the back cover.
The numbers or letters in boxes indicates the keys that should be pressed.
IMPORTANT
Read this manual carefully before starting the instruments. It will not take you very long
time and it will allow you to get to know it more quickly and more conveniently.
FRONT PART
1 Lamp tube
2 Reset push button
3 Display of length
4 Screen for sampling
5 Handle wheel
6 Dish spring
7 Spring screw
REAR PART
8 Fixing lamp screw
9 Main power switch ON/OFF
10 Cable for mains
11 Light adjustment
1
1. INTRODUCTION
The last step of the correct analysis of antibiotics activity consist in the measurement of
the halo created in its inhibition zone.
WHAT IS THE HALOES CALIPER?
The IUL Haloes Caliper works as a real caliper measuring distances with readability of
1mm but without touching the object to be calibrated.
The operator must only center the Petri dish containing the samples in the illuminated
field, rotating the handle wheel the size appears on the display. It is easy to change the
sample only by angular movement of the Petri dish.
2
2. TECHNICAL SPECIFICATIONS
Range of measurement: 35 mm
Resolution: 0.1 mm
Screen diameter: 55 mm
Magnifying factor: 2.25
Zero position: Any point
Counting direction: Up / Down
Maximum turns rot. wheel: 10
Working temperature: 5ºto 40ºC
Power supply: 100~240V 50/60 Hz
Dimensions: 270 x 230 x270 mm
Weight: 4 kg
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali IUL Strumento di misura
