Juniper SRX 210 Manuale utente

Powering On and Powering Off the SRX210 Services Gateway

This topic describes the following procedures:

1. Powering On the SRX210 Services Gateway on page 1

2. Powering Off the SRX210 Services Gateway on page 1

3. Resetting the SRX210 Services Gateway on page 2

Powering On the SRX210 Services Gateway

To power on the services gateway:

1. Ensure that you have connected the power supply to the device.

2. Insert the plug of the power supply adapter into an AC power source receptacle.

3. Turn on the power to the AC power receptacle.

The device starts automatically as the power supply completes its startup sequence.

The Power LED lights up during startup and remains on steadily when the device is

operating normally.

NOTE: After the power supply is turned on, it can take up to 60 seconds for status

indicators—such as the Status and Power LEDs—to show that the power supply is

functioning normally.

NOTE: It is recommended to issue the CLI command request system power-off when

you want to power off the device immediately after the device is powered on.

Powering Off the SRX210 Services Gateway

You can power off the services gateway in one of the following ways:

■Graceful shutdown —Press and release the Power button. The device begins

gracefully shutting down the operating system and then powers itself off.

■Immediate shutdown —Press the Power button and hold it for more than ten

seconds. The device immediately powers itself off without shutting down the

operating system.

NOTE: Do not press the Power button while the device is shutting down.

WARNING: Use the graceful shutdown method to halt, power off, or reboot the

services gateway. Use the immediate shutdown method as a last resort to recover

Powering On and Powering Off the SRX210 Services Gateway ■1

the services gateway if the services gateway operating system is not responding to

the graceful shutdown method.

CAUTION: Immediate shutdown can result in data loss and corruption of the file

system.

NOTE: To remove power completely from the device, unplug the AC power cord or

switch off the power source.

After powering off a power supply, wait at least 10 seconds before turning it back

on. After powering on a power supply, wait at least 10 seconds before turning it off.

The Power button on the services gateway is a standby power switch.

If you press the Power button to power off the device when it is still connected to a

power source, 12 V (Low Memory and High Memory models) /48 V (PoE and Voice

models) power will still be available in the chassis and the device will be fully powered

off.

TIP: When you are powering off the device, the system displays the following

message: Turning the system power off. You can now safely remove the power cable

to completely disconnect the power from the device.

NOTE: You can use the request system reboot CLI command to schedule a reboot

of the services gateway using request system reboot.

For more information about halting, powering off, or rebooting the services gateway

using CLI, see the JUNOS Software Administration Guide.

Resetting the SRX210 Services Gateway

The Reset Config button located at the front panel of the SRX210 Services Gateway

removes the current configuration and resets the device to the default configuration.

The button is recessed in the front panel to prevent it from being pressed accidentally.

NOTE: Pressing and holding the Reset Config button for 15 seconds or more deletes

all configurations on the device and loads and commits the factory configuration.

2■Resetting the SRX210 Services Gateway

Related Topics ■Connecting the SRX210 Services Gateway to the Power Supply

■Grounding the SRX210 Services Gateway

■SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, High

Memory and PoE Version)

■Using the Reset Config Button on the SRX210 Services Gateway

■SRX210 Services Gateway LEDs

Published: 2010-05-04

Resetting the SRX210 Services Gateway ■3

Altri manuali per SRX 210

Indice

Altri manuali Juniper Portale

Juniper

Juniper SRX320 Istruzioni per l'installazione

Juniper

Juniper SRX100 Manuale utente

Juniper

Juniper SRX220 Manuale utente

Juniper

Juniper SRX5600 Manuale utente

Juniper

Juniper SRX1500 Guida all'installazione

Juniper

Juniper SRX 210 Manuale utente

Juniper

Juniper SRX300 Series Manuale utente

Juniper

Juniper SRX4100 Istruzioni per l'installazione

Juniper

Juniper SRX550 Manuale utente

Juniper

Juniper SRX550 Manuale utente

Juniper

Juniper SRX3400 Istruzioni per l'installazione

Juniper

Juniper SRX 210 Manuale utente

Juniper

Juniper SRX550 Manuale utente

Juniper

Juniper SRX100B Istruzioni per l'installazione

Juniper

Juniper SRX5600 Istruzioni per l'installazione

Juniper

Juniper SRX320 Istruzioni per l'installazione

Juniper

Juniper BX7000 Istruzioni per l'installazione

Juniper

Juniper SRX 1400 SERVICES GATEWAY - Istruzioni per l'installazione

Juniper

Juniper SRX550 Istruzioni per l'installazione

Juniper

Juniper SRX345 Manuale utente

Juniper

Juniper SRX 5800 Istruzioni per l'installazione

Juniper

Juniper SRX110 Istruzioni per l'installazione

Juniper

Juniper SRX5600 Manuale di istruzioni

Juniper

Juniper SSG20 Manuale utente

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente