Kaiweets HT208D Manuale utente

True-rms Digital
Clamp Meter
User ManualHT208D
Contact us: support@Kai weets.com

Introduction��������������������������������������������������������������������������������������������������������������������� 1
Safety information��������������������������������������������������������������������������������������������������������� 1
Product Overview����������������������������������������������������������������������������������������������������������� 3
Symbol-Explanation������������������������������������������������������������������������������������������������������� 4
Function Buttons������������������������������������������������������������������������������������������������������������ 5
Advanced Functions ������������������������������������������������������������������������������������������������������ 7
AC current measurement with “Inrush” function ����������������������������������������������������������� 7
AC current measurement with “VFD” function�������������������������������������������������������������� 8
AC voltage measurement with “VFD” function�������������������������������������������������������������� 8
High-Impedance voltage measurement������������������������������������������������������������������������ 9
Low-Impedance voltage measurement ( )���������������������������������������������������������� ��9
Operating Instructions������������������������������������������������������������������������������������������������� 10
Contents

Insert and replace the batteries���������������������������������������������������������������������������������� 10
Turn on/o the meter �������������������������������������������������������������������������������������������������� 10
Automatic shutdown ��������������������������������������������������������������������������������������������������� 10
Auto-ranging ��������������������������������������������������������������������������������������������������������������� 11
AC zero input behavior of True-rms meters���������������������������������������������������������������� 11
Connecting test leads������������������������������������������������������������������������������������������������� 12
Making Measurements������������������������������������������������������������������������������������������������� 12
AC/DC current measurement ������������������������������������������������������������������������������������� 12
AC/DC voltage measurement������������������������������������������������������������������������������������� 14
Frequency or duty cycle measurements (Hz%)���������������������������������������������������������� 16
Resistance measurement ٠��������������������������������������������������������������������������������������� 17
Continuity test������������������������������������������������������������������������������������������������������������� 18
Diode test ������������������������������������������������������������������������������������������������������������������� 19

Capacitance measurement����������������������������������������������������������������������������������������� 20
Temperature measurement ���������������������������������������������������������������������������������������� 21
Non-contact AC voltage detection (NCV) ������������������������������������������������������������������� 22
Live detection ������������������������������������������������������������������������������������������������������������� 22
Specication ����������������������������������������������������������������������������������������������������������������� 24
Accuracy��������������������������������������������������������������������������������������������������������������������� 25
Maintenance������������������������������������������������������������������������������������������������������������������ 27
Cleaning the meter ����������������������������������������������������������������������������������������������������� 27
Three Year Warranty����������������������������������������������������������������������������������������������������� 28


2
terminals or between any terminal and earth ground�
• Remove test leads from the Meter before opening the Meter case�
• Never operate the Meter with the back cover removed or the case open�
• Never remove the back cover or open the case of an instrument without rst removing
the test leads or the jaws from a live conductor�
• Use caution when working with voltages above 30 V ac RMS, 42 V ac peak, or 60 V
dc� These voltages pose a shock hazard�
• Do not attempt to measure any voltage that might exceed the maximum range of the
Meter- 1000 V RMS�
• Do not operate the Meter around explosive gas, vapor, or dust�
• When using probes, keep ngers behind the nger guards.
• When making electrical connections, connect the common test lead before
connecting the live test lead; when disconnecting, disconnect the live test lead before
disconnecting the common test lead�
• Disconnect circuit power and discharge all high-voltage capacitors before testing
resistance,continuity, or diodes�
• Check the operation of the meter at a known source before and after use�

3
Product Overview
① NCV Probe
② Current Sensing Jaw
③ Flashlight
④ Tactile Barrier
⑤ Rotary Function Switch
⑥ Function Buttons
⑦ Display
⑧ Alignment Marks
⑨ Jaw Release
⑩ INPUT Terminal
(red test lead)
⑪ COM Terminal
(black test lead)
⑫ Data Hold / Flashlight Switch

4
Symbol-Explanation
CAT. III
Hazardous Voltage� Danger! Alternating Current (AC)
AC and DC Direct current (DC)
Important Information Earth
Fuse Low Battery Indication
Double Insulated
Conforms to European Union directives�
Do not dispose of this product as unsorted municipal waste�
IEC Measurement Category III: CAT�III equipment has protection against
transients in equipment in xed-equipment installations, such as distribution
panels, feeders and short branch circuits, and lighting systems in large buildings�
IEC Measurement Category IV: CAT�IV equipment has protection against
transients from the primary supply level, such as an electricity Meter or an
overhead or underground utility service�
CAT. IV

5
Function Buttons
Press the “FUNC�” key to switch the respective secondary function
between the dierent measurements for the applications accessible
via the function switch such as between AC and DC�
Auto-Ranging by default� Switches to manual mode and cycles
through all ranges� Auto-Ranging restored when pressed for two
seconds�
Press this key to switch between the maximum and minimum
values; Press this key for more than 2 seconds to exit this mode�
Before entering the “MAX/MIN” mode, press the range key to switch
to the most suitable range� After entering this mode, the meter will
automatically enter to manual range mode�

6
NOTE: In DC current measurement mode, this key is the “ZERO”key�
However, in other functions, this key is the “REL” key�
“REL” Function: Relative (REL) mode: Stores existing reading (a
delta) and resets display to zero� Sets a relative reference point
tomeasure against the next reading�
“ZERO” Function: This function allows the user to set the
magnetization effects to zero when measuring DC� It must be
performed after each high amplitude current measurement� With no
conductor inserted into the clamp, press and hold this key (approx�
3 seconds) until a beep sounds and the “ZERO” symbol appears on
the display�
HOLD: Captures and holds a stable measurement�
Make sure that the function is deactivated at the start of the test�
Otherwise an incorrect measurement result will be simulated!
Work Light: Press and hold this button for more than 2 seconds to
switch the work light on or o.
Altri manuali per HT208D
1
Indice
Altri manuali Kaiweets Strumento di misura

Kaiweets
Kaiweets HT200B Manuale utente

Kaiweets
Kaiweets HT206B Manuale utente

Kaiweets
Kaiweets HT200B Manuale utente

Kaiweets
Kaiweets HT112B Manuale utente

Kaiweets
Kaiweets HT208A Manuale utente

Kaiweets
Kaiweets KC601 Manuale utente

Kaiweets
Kaiweets HT208D Manuale utente

Kaiweets
Kaiweets HT206D Manuale utente

Kaiweets
Kaiweets HT206B Manuale utente

















