Kett Riceter fv208 Manuale utente

Grain Moisture Tester Riceter fv208

Operating Manual

Thank you for purchasing our Grain/Rice/Seed Moisture Tester, Riceter

fv200 series. This tester can measure the moisture of grain by simple op-

eration, but proper operation is necessary for accurate moisture measure-

ment.

Please read this operating manual carefully before use.

Note: The pictures in this manual are examples and may differ from

actual product.

Contents of Package ............................................................................ 2

Part Names .............................................................................................. 3

Description of Display ......................................................................... 4

How to Place Batteries ........................................................................ 6

Before Measurement ........................................................................... 7

Measurement ......................................................................................... 8

Average Value....................................................................................... 17

Storage.................................................................................................... 18

Applications .......................................................................................... 19

Specications .......................................................................................20

Table of contents

Contents of Package

Operating

manual

Rice husker

TR-130

Carrying case

Sample tray

(2 pcs)

Spoon

with tweezers

Cleaning brush Battery

(AA size x4 pcs)

Inspection

certicate

Riceter

J·m·f checker

Part Names

“POWER” button

“SELECT” button

Display Handle stop mark

Model No.

“MEA.” button (Measure)

“AVG.” button (Average)

Testing Chamber

Handle

This tester adopts the auto power off

function. The power of the tester is

automatically turned o in approx.

5 minutes after turning on the power if

no operation is performed.

Use of backlight in the display section

allows users to see the display clearly

even in the dark.

Battery Indicator

Moisture Content

Number of measurement

Application Name

Description of Display

Meanings of special marks The display may show marks as follows:

Battery mark Caution Battery is dead. Replace the batteries with new ones.

(displayed immediately after pressing the power switch and while using)

Over mark Caution Displayed when the measured result exceeded the upper limit of the

measurement range

Under mark Caution

Displayed when the measured result fell below the lower limit of the

measurement range, or the contact between the test sample tray

and the measuring unit of the main body was poor.

Error mark

Main unit temperature is too low -5°C or lower.

Main unit temperature is too high 50°C or higher.

• When measurement is performed with the Sample tray empty or the measuring unit is

poorly insulated due to condensation, high humidity, contamination, etc., the over mark,

under mark, or other meaningless numbers may be displayed. In such a case, clean the

measuring unit and dry it well in a natural way.

Description of Display

123

Take out the main unit

from the carrying case.

Take out the batteries

from the battery holder.

Open the battery box

on the back side of the

main unit, and place 4

batteries appropriately.

How to Place Batteries

Battery replacement

When the battery is running out, the

battery mark lights up the display.

Replace all 4 batteries (AA) with new

ones.

Those batteries are gradually discharging

even when the tester is not used.

It is recommended to always use new

batteries.

Place batteries in

the correct polarity

Riceter fv200 series is equipped with a

temperature compensation function.

However, the test unit and samples

are required to be thermally stabilized

before measurement.

Before MeasurementHow to Place Batteries

Press the “POWER” button. All the characters and marks on the display section as

well as the backlight light up for 2 seconds, and then model number and software

version number are automatically displayed. The backlight goes out, and the tester

becomes a standby state for measuring.

Measurement

Ex) Riceter fv201

Indice

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente