Keysight Technologies 16034G Manuale utente

Keysight 16034G

Test Fixture

Operation Manual

Notices

The information contained in this document is subject to change without notice.

This document contains proprietary information that is protected by copyright. All

rights are reserved. No part of this document may be photocopied, reproduced, or

translated to another language without the prior written consent of the Keysight

Technologies.

Keysight Technologies Japan, Ltd.

Component Test PGU-Kobe

1-3-3 Higashikawasaki-cho, Chuo-Ku Kobe-shi, Hyogo, 650-0044 Japan

Manual Printing History

The manual’s printing date and part number indicate its current edition. The

printing date changes when a new edition is printed. (Minor corrections and

updates incorporated in reprints do not necessitate a new printing date.) The

manual part number changes when extensive technical changes are incorporated.

January 1999 Edition 1 (part number: 16034-90001)

April 1999 Edition 2 (part number: 16034-90011)

December 1999 Edition 3 (part number: 16034-90011)

January 2001 Edition 4 (part number: 16034-90011)

March 2015 Edition 5 (part number: 16034-90011)

November 2016 Edition 6 (part number: 16034-90011)

Safety Summary

The following general safety precautions must be observed during all phases of

operation, service, and repair of this instrument. Failure to comply with these

precautions or with specific WARNINGS elsewhere in this manual may impair the

protection provided by the equipment. Such noncompliance would also violate

safety standards of design, manufacture, and intended use of the instrument.

Keysight Technologies assumes no liability for the customer’s failure to comply

with these requirements.

• Ground the instrument

To avoid electric shock hazard, the instrument chassis and cabinet must be

grounded by using the supplied power cable’s grounding prong.

• DO NOT operate in an explosive atmosphere

Do not operate the instrument in the presence of flammable gasses or fumes.

Operation of any electrical instrument in such an environment clearly

constitutes a safety hazard.

• Keep away from live circuits

Operators must not remove instrument covers. Component replacement and

internal adjustments must be made by qualified maintenance personnel. Do not

replace components with the power cable connected. Under certain conditions,

dangerous voltages may exist even with the power cable removed. To avoid

injuries, always disconnect power and discharge circuits before touching them.

• DO NOT service or adjust alone

Do not attempt internal service or adjustment unless another person, capable of

rendering first aid and resuscitation, is present.

• DO NOT substitute parts or modify instrument

To avoid the danger of introducing additional hazards, do not install substitute

parts or perform unauthorized modifications to the instrument. Return the

instrument to a Keysight Technologies Sales and Service Office for service and

repair to ensure that safety features are maintained in operational condition.

• Dangerous Procedure Warnings

Warnings, such as the example below, precede potentially dangerous

procedures throughout this manual. Instructions contained in the warnings must

be followed.

Dangerous voltages, capable of causing death, are present in this instrument.

Use extreme caution when handling, testing, or adjusting this instrument.

Certification

Keysight Technologies certifies that this product met its published specifications at

the time of shipment from the factory. Keysight Technologies further certifies that

its calibration measurements are traceable to the United States National Institute of

Standards and Technology, to the extent allowed by the Institution’s calibration

facility, or to the calibration facilities of other International Standards Organization

members.

Warranty

This Keysight Technologies instrument product is warranted against defects in

material and workmanship for a period corresponding to the individual warranty

periods of its component products. Instruments are warranted for a period of one

year. Fixtures and adapters are warranted for a period of 90 days. During the

warranty period, Keysight Technologies will, at its option, either repair or replace

products that prove to be defective.

For warranty service or repair, this product must be returned to a service facility

designated by Keysight Technologies. Buyer shall prepay shipping charges to

Keysight Technologies and Keysight Technologies shall pay shipping charges to

return the product to Buyer. However, Buyer shall pay all shipping charges, duties,

and taxes for products returned to Keysight Technologies from another country.

Keysight Technologies warrants that its software and firmware designated by

Keysight Technologies for use with an instrument will execute its programming

instruction when property installed on that instrument. Keysight Technologies does

not warrant that the operation of the instrument, or software, or firmware will be

uninterrupted or error free.

Limitation Of Warranty

The foregoing warranty shall not apply to defects resulting from improper or

inadequate maintenance by Buyer, Buyer-supplied software or interfacing,

unauthorized modification or misuse, operation outside the environmental

specifications for the product, or improper site preparation or maintenance.

No other warranty is expressed or implied. Keysight Technologies specifically

disclaims the implied warranties of merchantability and fitness for a particular

purpose.

Exclusive Remedies

The remedies provided herein are buyer’s sole and exclusive remedies. Keysight

Technologies shall not be liable for any direct, indirect, special, incidental, or

consequential damages, whether based on contract, tort, or any other legal theory.

Assistance

Product maintenance agreements and other customer assistance agreements are

available for Keysight Technologies products.

For any assistance, contact your nearest Keysight Technologies Sales and Service

Office. Addresses are provided at the back of this manual.

Safety Symbol

General definitions of safety symbols used on the instrument or in its manuals are

listed below.

Instruction Manual symbol: the product is marked with this symbol when it is

necessary for the user to refer to the instrument manual.

Alternating Current

Direct Current

On (Supply)

Off (Supply)

In position of push-button switch

Out position of push-button switch

Frame (or chassis) terminal: A connection to the frame (chassis) of the equipment,

which normally includes all exposed metal structure.

This warning sign denotes a hazard. It calls attention to a procedure, practice,

or condition which, if not correctly performed or adhered to, could result in

injury or death to personnel.

This Caution sign denotes a hazard. It calls attention to a procedure, practice, or

condition which, if not correctly performed or adhered to, could result in damage

to or destruction of part or all of the product.

This Note sign denotes important information. It calls attention to a procedure,

practice, or condition which is essential for the user to understand.

Contents

1. Overview

Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Incoming Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2. Operation

Performing Open and Short Correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Connecting the 16034G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Performing Short Correction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Performing Open Correction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

DUT Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

DUT measurement over 3 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

3. Specifications and Supplemental Performance Characteristics

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Supplemental Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Frequency Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Additional Errors (With OPEN/SHORT correction). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Contact Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Contents

Indice

Altri manuali Keysight Technologies Strumento di misura

Keysight Technologies

Keysight Technologies N9020B Manuale

Keysight Technologies

Keysight Technologies FieldFox N9912A Manuale del proprietario

Keysight Technologies

Keysight Technologies N5252A Manuale utente

Keysight Technologies

Keysight Technologies EPM-P Series Istruzioni operative

Keysight Technologies

Keysight Technologies M9260A Guida utente

Keysight Technologies

Keysight Technologies N5511A-K26 Manuale utente

Keysight Technologies

Keysight Technologies M8131A Manuale utente

Keysight Technologies

Keysight Technologies B2900 Series Manuale utente

Keysight Technologies

Keysight Technologies X Series Manuale utente

Keysight Technologies

Keysight Technologies P5000A Series Manuale utente

Keysight Technologies

Keysight Technologies U1273A Manuale utente

Keysight Technologies

Keysight Technologies PNA Series Manuale utente

Keysight Technologies

Keysight Technologies M980xA PXIe Manuale utente

Keysight Technologies

Keysight Technologies N9000B Manuale di installazione e funzionamento

Keysight Technologies

Keysight Technologies N9010B Manuale di installazione e funzionamento

Keysight Technologies

Keysight Technologies N9030B Manuale di installazione e funzionamento

Keysight Technologies

Keysight Technologies UXA N9040B Manuale utente

Keysight Technologies

Keysight Technologies X Series Manuale del proprietario

Keysight Technologies

Keysight Technologies 34959A Manuale utente

Keysight Technologies

Keysight Technologies E5052B Manuale del proprietario

Keysight Technologies

Keysight Technologies U5309A Guida utente

Keysight Technologies

Keysight Technologies C Series Manuale utente

Keysight Technologies

Keysight Technologies M981 AS Series Manuale utente

Keysight Technologies

Keysight Technologies FieldFox A Series Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente