www.keysight.com/find/LCRmeters
Description Model Number Additional Information
SMD Test Fixture 16034E For SMD; (0.1 to 8)L x (0.5 to 10)W x (0.5 to 10)H mm.
Operation and Service Manual is furnished.
SMD Test Fixture 16034G For SMD; (0.1 to 5)L x (0.3 to 1.6)W x (0.3 to 1.6)H mm. 100 ΩSMD resistors set is furnished.
16034G-ABA U.S. – English localization 1
16034G-ABJ Japan – Japanese localization 1
SMD Test Fixture 16034H For Array-type SMD; (0.1 to 5)L x (≤ 15)W x (0.6 to 3)H mm. 100 ΩSMD resistors set and Operation
Manual are furnished.
Test Fixture 16047A For axial or radial lead device. Operation and Service Manual is furnished.
16047A-701 Adds Shorting plate
Test Fixture 16047E For axial or radial lead device
16047E-ABA U.S. - English localization 1
16047E-ABJ Japan – Japanese localization 1
Test Leads 16048A BNC connector leads; 0.94 m. BNC connector bracket and Operation and Service Manual are furnished.
Test Leads 16048D BNC connector leads; 1.89 m. BNC connector bracket and Operation and Service Manual are furnished.
Test Leads 16048E BNC connector leads; 3.8 m. BNC connector bracket and Operation and Service Manual are furnished.
Available Accessories – General Measurement Accessories
Tweezers Test Fixture 16334A For SMD; ≤ 10 mm L. Tweezers type; cable length 1 m.
Shorting block and Operation and Service Manual are furnished.
Kelvin Clip Leads 16089A 2 large clips. 5 Hz - 100 kHz. Choose mandatory option 16089A-800 or C20.
Operation and Service Manual is furnished.
16089A-800 Cable length: 1 m (standard)
16089A-C20 Cable length: 2 m
Kelvin Clip Leads 16089B 2 medium clips. 5 Hz - 100 kHz. Choose mandatory option 16089B-800 or C20.
Operation and Service Manual is furnished.
16089B-800 Cable length: 1 m (standard)
16089B-C20 Cable length: 2 m
Kelvin IC Clip Leads 16089C 2 IC clips. 5 Hz - 100 kHz. Cable length 1 m. Operation and Service Manual is furnished.
External Voltage Bias
Fixture
16065A ± 200 V dc max., for axial or radial lead device.
Shorting plate and Operation and Service Manual are furnished.
Dielectric Test Fixture 16451B Test fixture for measuring permittivity of dry solid sheet material; Cable length 1 m.
38 mm and 5 mm diameter electrodes for measuring bare material and two types of electrodes for
measuring material with pre-formed electrodes are furnished.
16451B-ABA U.S. – English localization 1
16451B-ABJ Japan – Japanese localization 1
Liquid Test Fixture 16452A Test fixture for measuring permittivity of liquid material. Required volume of material; 3.4, 3.8, 4.8 or
6.8 ml. Temperature range: –20 ° to +125 °C. Shorting plate, spacers, SMA-BNC adapters, fixture stand,
carrying case and Operation and Service Manual are furnished.
(16048A or 16452-61601 Test Leads recommended)
Test Leads 16048G, BNC
(m-m) adapter × 4
(p/n 1250-0216 × 4)
Heat-proof test leads for use with the 16452A. Temperature range: –20 ° to +150 °C
1. Language selection of Operation and Service Manual.
Note: For more detailed information, refer to Accessories Selection Guide for Impedance Measurements.
05 | Keysight | E4980A/E4980AL Precision LCR Meters - Configuration Guide
