Klein Tools ET300 Manuale utente

ENGLISH

Instruction Manual

 

 





 



 







ET300

Apo

Digital Circuit

Breaker Finder

Digital Circuit Breaker

Finder

ET300

TRANSMITTER

Digital Circuit Breaker

Finder

ET300

RECEIVER

Micro-Processor

Controlled





(Cat. No. 69411)

ET300





• 90 – 120V AC

• 50 – 60Hz

• Up to 1000 ft. (305 m)

• 32°F – 104°F (0°C – 40°C)

• 50%

• < 6562 ft. (2000 m)

• For indoor use only

•9 volt alkaline battery

• Approximately 4 minutes

• 2.8" x 1.9" x 1.2" (7.11 x 4.83 x 3.04 cm)

• 6.0" x 2.0" x 0.9" (15.24 x 5.08 x 2.29 cm)

• 1.6 oz. (45 g)

•3.2 oz. (91 g)

• Indication at 0.16" (4 mm) distance from a wire

carrying 120V AC.

• UL listed



To ensure safe operation and service of the tester, follow these instructions.

Failure to observe these warnings can result in severe injury or death.

• Understand the risks of working around live voltage.

• Turn off power before inspecting, applying, or removing

the transmitter (when using the optional 'Leads Adapter').

• Exercise extreme caution around live, bare wires, especially

in an open breaker panel.

• Consult with an experienced electrician when necessary.



Screw this adapter into an empty light socket.

Make sure the ﬁxture is live. Plug in the

transmitter and follow the instructions

starting at step 4.



Carefully attach leads to the correct wires.

Plug in transmitter to adapter. Follow the

instructions starting at step 4.

Exercise extreme caution around live wires.

Dig tal C rcu t B eaker

Finder

ET300

TRANSMITTER

99 Washington Street

Melrose, MA 02176

Phone 781-665-1400

Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com





1. Identify the wall outlet or ﬁxture for which the breaker must

be determined.

2. Safely check that the outlet or ﬁxture is live.

3. Plug in the transmitter. Its LED will light if it is receiving power.

4. Move to the breaker panel with the receiver.

5. Turn on the receiver by pressing, but not holding, the power button.

You will hear a beep and see its LED lit.

6. Position the receiver perpendicularly on the breakers in the panel

with the power button pointing up.

7. Slowly scan all breakers in the panel once. Ignore any beeps

or indications, as the receiver is learning the panel.

8. Scan all breakers a second time. This time, the receiver will beep

and illuminate the green arrow only at the correct breaker.

9. Power off the receiver by pressing and holding the power button.

Return to the outlet or ﬁxture and remove the transmitter.



Clean the instrument by using a damp cloth. Do not use abrasive cleaners

or solvents.



Remove the batteries when instrument is not in use for a prolonged period of

time. Do not expose to high temperatures or humidity. After a period of storage in

extreme conditions exceeding the limits mentioned in the Speciﬁcations section,

allow the instrument to return to normal operating conditions before using it.



Do not place equipment and its accessories in the trash. Items must

be properly disposed of in accordance with local regulations.

Digi al Circu t Breaker

Finder

ET300

Micro-Processor

Controlled

Digital Circuit Breaker

Finder

ET300

Digital Circu t Breaker

Finder

ET300

TRANSMITTER

Once plugged in, the LED

will light up when

socket is live

99 Washington Street

Melrose, MA 02176

Phone 781-665-1400

Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

Altri manuali per ET300

Altri manuali Klein Tools Strumento di misura

Klein Tools

Klein Tools CL110 Manuale utente

Klein Tools

Klein Tools CL360 Manuale utente

Klein Tools

Klein Tools CL380 Manuale utente

Klein Tools

Klein Tools 935DAGL Manuale utente

Klein Tools

Klein Tools CL210 Manuale utente

Klein Tools

Klein Tools CL600 Manuale utente

Klein Tools

Klein Tools PROBEplus Manuale utente

Klein Tools

Klein Tools Toner-Pro VDV500-123 Manuale utente

Klein Tools

Klein Tools LAN Scout Jr. 2 Manuale utente

Klein Tools

Klein Tools CL210 Manuale utente

Klein Tools

Klein Tools CL800 Manuale utente

Klein Tools

Klein Tools CL320 Manuale utente

Klein Tools

Klein Tools CL310 Manuale utente

Klein Tools

Klein Tools VDV501-098 Manuale utente

Klein Tools

Klein Tools 93LDM100C Manuale utente

Klein Tools

Klein Tools CL200 Manuale utente

Klein Tools

Klein Tools VDV500-051 Manuale utente

Klein Tools

Klein Tools VDV501-089 Manuale utente

Klein Tools

Klein Tools CL330 Manuale utente

Klein Tools

Klein Tools MM6000 Manuale utente

Klein Tools

Klein Tools ET140 Manuale utente

Klein Tools

Klein Tools CL120 Manuale utente

Klein Tools

Klein Tools ET920 Manuale utente

Klein Tools

Klein Tools CL2500 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente