Kogan KATVBKSTNDA Manuale utente

Altri manuali per KATVBKSTNDA

2

Indice

Altri manuali Kogan Rack e supporto

Kogan

Kogan ovela OVDELUXWCRA Manuale utente

Kogan

Kogan LCDP30 Manuale utente

Kogan

Kogan KATVBKSTNDA Manuale utente

Kogan

Kogan KATVBKSTNDA Manuale utente

Kogan

Kogan KASTDARIKLA Manuale utente

Kogan

Kogan KAWLM55CNRA Manuale utente

Kogan

Kogan KASTTVPB55A Manuale utente

Kogan

Kogan KAWLMFX75MA Manuale utente

Kogan

Kogan NB14T20DSBA Manuale utente

Kogan

Kogan KAWLM90FIXT Manuale utente

Kogan

Kogan KASMM39S12A Manuale utente

Kogan

Kogan KAWLMSBMNTA Manuale utente

Kogan

Kogan FSDB24STNDB Manuale utente

Kogan

Kogan KAWLM82TEXA Manuale utente

Kogan

Kogan OSTIA Series Manuale utente

Kogan

Kogan KATVCST65LM Manuale utente

Kogan

Kogan KAWLM55TLTA Manuale utente

Kogan

Kogan OSTIA Series Manuale utente

Kogan

Kogan KATVSTHLDCA Manuale utente

Kogan

Kogan KASLSTMTSTA Manuale utente

Kogan

Kogan KAWLM70CNRA Manuale utente

Kogan

Kogan KAWLM55TEXA Manuale utente

Kogan

Kogan KAWLMSBMNTA Manuale utente

Kogan

Kogan KAMMFS12DA Manuale utente

Manuali Rack e supporto popolari di altre marche

Salamander

Salamander Acadia AC/W/L400/WH Manuale utente

Fohhn

Fohhn VAT-09 Guida utente

ricoo

ricoo FS0522 Manuale utente

AMSOIL

AMSOIL BMK-22 Guida rapida

Kargo Master

Kargo Master 48220 Manuale utente

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuale utente

ricoo

ricoo S1222 Manuale utente

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuale utente

VidaBox

VidaBox VB MNT FFS2 Manuale utente

Welch Allyn

Welch Allyn 48960 Manuale utente

Arkon

Arkon CM035-ST-2 Manuale utente

PROEL

PROEL PLWIN60C Manuale utente

Agilent Technologies

Agilent Technologies E2609B Manuale utente

Mustang

Mustang MV-ARM4 Manuale utente

Mounting Solutions

Mounting Solutions WRM-320 Manuale utente

Pyle

Pyle PMKSPAD1 Manuale utente

ShelterIt

ShelterIt 21208 Manuale utente

SPL

SPL RackPack?4 1040 Manuale utente

SWIVEL TABLETOP STAND

WITH GLASS BASE

(FOR 32”-70” TVS)

KATVBKSTNDA

•Read all instructions before use, and retain this user guide for future reference.

•Ensure you have located all components before disposing of any packaging

materials.

•This unit is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities or lack of experience and knowledge, unless

they have been given supervision or instructions concerning use of the appliance by

a person responsible for their safety.

•This product contains small parts which could pose a choking hazard if swallowed.

Keep away from children.

•Maximum weight capacity for this stand is 40kg.

•Pay close attention to the weight limits, ensure all connections are secure and

ensure the screws, brackets and mounting points on any monitors are in good

condition.

•Safety gear and proper tools must be used. This product should only be installed by

professionals.

•This product is for indoor use only. Use outdoors may result in product failure,

product damage and/or personal injury.

•Note the following icon when lifting or moving this product:

Lifting with two people is recommended at all times.

SAFETY & WARNINGS

DIMENSIONS

Parts:

COMPONENTS

Hardware:

A1 x 4

A2 x 3

A3 x 3

A4 x 2

A5 x 3

A6 x 4

A7 x 2

A8 x 2

A9 x 2

A10 x 1

A11 x 1

A12 x 2

M-A (M5x14) x 4

M-B (M6x14) x 4

M-C (M6x30) x 4

M-D (M8x30) x 4

M-F (M8x50) x 4

M-F x 4

M-G x 8

M-H x 8

Note:

This assembly requires a Phillips head screwdriver (not supplied).

Step 1:

Add adhesive feet (A1) to the main base (B1).

Step 2:

Fit end piece (B5) to the stand (B2).

ASSEMBLY

Step 3:

Align the swivel base (A6) with the stand (B2) and fit with x2 A4 screws, using the Allen key

(A10) to tighten the screws.

Step 4:

Next, fit the main base (B1) to the swivel base (A6), using the x3 A2 and A3 washers and x3

A5 screws. Use the Allen key to tighten. Ensure to not overtighten the screws.

Step 5:

Use the Allen key (A10) to loosen the screws from the stand’s mounting fixture.

This will allow it to be set at your ideal TV height. Once determined, refit the

mounting fixture with the same screws.

Use the spanner (A11) to fit the A9 nuts, and a Phillips head screwdriver

(not supplied) to fit the A7 screws with A6 washers.

Step 6:

Using a Phillips head screwdriver, fit the support beam (B3) to the mounting

fixture with the A8 screws and A6 washers.

Step 7:

Use a Phillips head screwdriver to remove the locking screws from the x2

mounting rails (B4). Keep these screws nearby, as they will be required at a

later step.