Kramer Galil 6-I Manuale utente

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

Galil 6-I

2-Way In-Wall Speakers

P/N: 2900-300430 Rev 1

Galil 6-I – Contents

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

3Overview 3

4Your Galil 6-I 4

5Installing the Galil 6-I 2-Way In-Wall Speakers 5

5.1 Choosing the Best Location 5

5.2 Cutting an Opening 5

5.3 Installing the Speakers 6

5.4 Understanding the Ceiling Coverage Area 8

5.5 Painting the Speaker 9

6Technical Specifications 10

Figures

Figure 1: Galil 6-I 2-Way In-Wall Speakers in a Boardroom Setup 3

Figure 2: Galil 6-I 2-Way In-Wall Speakers 4

Figure 3: Position the Mounting Tabs 7

Figure 4: Galil 6-I Speakers Pinout 8

Figure 5: The Speaker Coverage Area 8

Figure 6: Square Layout Parallel Wiring 9

Galil 6-I - Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 14 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11:

Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and

GROUP 14: Collaboration.

Congratulations on purchasing your Kramer Galil 6-I 2-Way In-Wall Speakers,

which are ideal for the following typical applications:

Presentation venues

Training rooms

Conference rooms

Hotel lobbies

Educational classrooms

Galil 6-I is designed for indoor dry locations and is suitable for use

in air handling spaces (plenum spaces).

Galil 6-I - Getting Started

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

Go to http://www.kramerelectronics.com/support/product_downloads.asp

to check for up-to-date user manuals, application programs, and to check if

firmware upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

Position your Kramer Speakers away from moisture, excessive sunlight and

dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

Do not open the housing of the speaker; doing so may reduce the

quality of the sound.

Galil 6-I - Overview

3 Overview

The Galil 6-I speakers include a pair of high performance speakers that can be

mounted in the wall vertically or horizontally, and also into the ceiling.

Figure 1 shows an example of how the 2-Way In-Wall Speakers can be installed in

a boardroom setup:

Figure 1: Galil 6-I 2-Way In-Wall Speakers in a Boardroom Setup

Galil 6-I - Your Galil 6-I

4 Your Galil 6-I

Figure 2 defines the Galil 6-I:

Figure 2: Galil 6-I 2-Way In-Wall Speakers

When planning to install the Galil 6-I in the ceiling, be sure that the

tiles can support the speaker. Smaller sized tiles or fiberglass-type

tiles cannot support the weight of the speakers. When this is the

case, the speakers will need additional reinforcement.

Galil 6-I - Installing the Galil 6-I 2-Way In-Wall Speakers

5 Installing the Galil 6-I 2-Way In-Wall

Speakers

This section explains how to install the 2-Way In-Wall Speakers, that is:

Choosing the best place to locate your speakers (see Section 5.1)

Cutting an opening in the wall or ceiling (see Section 5.2)

Installing the speakers (see Section 5.3)

Coverage area in case of ceiling installation (see Section 5.4)

Painting the speakers (see Section 5.5)

5.1 Choosing the Best Location

Locate the speakers in the main listening area placing the tweeters as close to ear

level as possible and at the same height. Locate the left and right speakers at

least 1.8m (6 feet) apart and 1m (3.3 feet) away from the room corners. Once you

have the location set, you can install them.

Before doing so, be sure that:

The desired location is free of obstructions, such as electrical piping, AC

ducts or water lines, and so on

The thickness of the mounting surface is between 0.95cm and 3.2cm

(0.375" and 1.25”)

There is at least a space of 7.5 cm (2.9") behind the mounting surface for

the speakers

The rear side of the speaker is not blocked by wall studs or other objects

5.2 Cutting an Opening

Before installing the Galil 6-I you will need to cut an opening in the wall or the

ceiling tile. To do so:

1. Remove the rectangle in the supplied template and tape it to the wall in the

correct location.

Galil 6-I - Installing the Galil 6-I 2-Way In-Wall Speakers

Keep this template for later use as a mask, as you may want to paint the speakers (see

Section 5.5).

2. Mark the opening in the correct location by tracing the hole in the template

(either on the wall or the ceiling tile, see Section 5.2.1 for further

information).

3. Cut out a hole or small area within the marked template.

Initially, you can cut a smaller area inside the marked hole just to be sure that the area

behind the wall is clear. To do so insert a piece of “L-shaped”wire into the smaller

opening and rotate it. If the wire hits any obstacle which prevents you from installing the

speakers, you will need to move the template and test the area behind the wall again.

4. Cut out the full-sized opening according to the template.

5. Routethewiringfromtheamplifiertothespeakers’cut out holes, taking

care not to place them next to electrical wires or at least at a distance of

about two feet from an AC line.

Do not nail or staple the speaker wires.

5.2.1 Cutting out a ceiling Tile

If you are mounting the speakers into a ceiling tile, remove the ceiling tiles where

you plan to install the speakers. Use the template to trace and then cutout the

speaker hole over an empty box.

Be sure that the tiles can support the speaker. Smaller sized tiles or

fiberglass-type tiles cannot support the weight of the speakers.

When this is the case, the speakers will need additional support.

5.3 Installing the Speakers

To install the speakers, do the following:

1. Remove the grille over the speakers by inserting a paper clip into one of the

grille openings and pulling it upward.

2. Position the mounting tabs (see Figure 3) inward.

Galil 6-I - Installing the Galil 6-I 2-Way In-Wall Speakers

Figure 3: Position the Mounting Tabs

3. Insert the supplied screws into the screw openings from the front of the

speakers.

4. Connect the speaker wires (we recommend that you use our Kramer BC-2S

cables) to the speaker terminals.

Indice

Altri manuali Kramer Altoparlanti

Kramer

Kramer Galil 5-O SPK-W511T Manuale utente

Kramer

Kramer SPK-C612 Manuale utente

Kramer

Kramer SPK-C611 Manuale utente

Kramer

Kramer SPK-OC608 Manuale utente

Kramer

Kramer SPK-C612 Manuale di installazione e funzionamento

Kramer

Kramer Galil 8-C Manuale utente

Kramer

Kramer SPK-W611 Manuale utente

Kramer

Kramer Yarden 8-T SPK-C820T Manuale utente

Kramer

Kramer Galil 4-D Manuale utente

Kramer

Kramer Yarden VT-1 Manuale utente

Kramer

Kramer SPK-W411T Manuale utente

Kramer

Kramer SPK-CCF848 Manuale utente

Kramer

Kramer Galil 8-CO Manuale utente

Kramer

Kramer SPK-CO608 Manuale utente

Kramer

Kramer Yarden IH-1 Manuale utente

Kramer

Kramer SPK-W511T Manuale utente

Kramer

Kramer SPK-W612 Manuale utente

Kramer

Kramer Galil 2-C Manuale utente

Kramer

Kramer Yarden 4-O Manuale utente

Kramer

Kramer SPK-OC508 Manuale utente

Kramer

Kramer SPK-CC688 Manuale utente

Kramer

Kramer Galil 6-AW Manuale utente

Kramer

Kramer SPK-WA511 Manuale utente

Kramer

Kramer SPK-W511 Manuale utente

Manuali Altoparlanti popolari di altre marche

argon audio

argon audio IE20 Manuale utente

Denon

Denon SC-N7 Manuale utente

Gemline

Gemline Ace 3952 Manuale utente

Focal

Focal ON WALL 300 Manuale di istruzioni

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuale utente

SoundLogic

SoundLogic BCCS-6/6395 Manuale utente

Peavey

Peavey DTH 218 Manuale utente

Avantree

Avantree Pluto Air Manuale utente

Morel

Morel Integra Series INTEGRA OVATION 4 Manuale utente

Oppo

Oppo SONICA Manuale utente

Bose

Bose SoundLink Wireless Music System Manuale utente

Rocksteady

Rocksteady Stadium Manuale utente

Bowers & Wilkins

Bowers & Wilkins 4 Manuale utente

Sonance

Sonance SONOS OUTDOOR Series Manuale utente

Electro-Voice

Electro-Voice EVID FM4.2 Manuale utente

Pioneer

Pioneer XW-HTD630 Manuale utente

Onn

Onn BWA16AA002 Manuale utente

HP GL313AA - USB Speakers PC Multimedia Manuale utente