Contents
1Introduction 1
2Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 2
2.3 Recycling Kramer Products 3
3Overview 4
4Defining the 691 HDBT 2.0 Optical Transmitter 6
5Connecting the 691 HDBT 2.0 Optical Transmitter 8
5.1 Using the OSP SFP+ Module 12
5.2 Connecting to 691 via RS-232 15
5.3 Connecting 691 via the Ethernet Port 16
6Principles of Operation 20
6.1 Audio Output 20
6.2 Video Output and Audio Switching Timeouts 20
6.3 Controlling A/V Equipment via an IR Remote Control 20
7Configuring the 691 HDBT 2.0 Optical Transmitter 23
8Using the Embedded Web Pages 24
8.1 Browsing the 691 Web Pages 24
8.2 Setting the Sleep Mode, HDCP Mode and Audio Switching Delay Time 26
8.3 Setting Device Parameters 28
8.4 Managing the EDID 32
8.5 Authentication Page 34
8.6 Viewing the About Page 35
9Firmware Upgrade 36
10 Technical Specifications 37
10.1 Default Communication Parameters 39
10.2 Default Parameters 39
10.3 Default EDID 39
11 Protocol 3000 42
11.1 Understanding Protocol 3000 43
11.2 Kramer Protocol 3000 Syntax 45
11.3 Protocol 3000 Commands 46
Figures
Figure 1: 691 Front Panel 6
Figure 2: 691 Rear Panel 7
Figure 3: Connecting the Fiber Optic Cable 9
Figure 4: Connecting the 691 and 692 11
Figure 5: System Layout Example for Optical Reach Evaluation 13
Figure 6: Inserting the Transceiver Module 14
Figure 7: RS-232 Connection 15
Figure 8: Local Area Connection Properties Window 17
Figure 9: Internet Protocol Version 4 Properties Window 18
Figure 10: Internet Protocol Version 6 Properties Window 18
Figure 11: Internet Protocol Properties Window 19
