Kramer DIP-20 Manuale utente

DIP-20 Quick Start

P/N:

2900- 301071QS

Rev:

Scan for full manual

DIP-20 Quick Start Guide

This guide helps you install and use your DIP-20 for the first time.

Go to www.kramerav.com/downloads/DIP-20 to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

DIP-20 Automatic Video Switcher

1 Bracket set

4 Rubber feet

1 Power adapter (48V)

1 Quick start guide

Step 2: Mount DIP-20

Install DIP-20 using one of the following methods:

•Attach the rubber feet and place the unit on a flat surface.

•Fasten a bracket (included) on each side of the unit and attach it to a flat surface

(see www.kramerav.com/downloads/DIP-20).

•Mount the unit in a rack using the recommended rack adapter

(see www.kramerav.com/product/DIP-20).

•Ensure that the environment (e.g., maximum ambient temperature &

air flow) is compatible for the device.

•Avoid uneven mechanical loading.

•Appropriate consideration of equipment nameplate ratings should be

used for avoiding overloading of the circuits.

•Reliable earthing of rack-mounted equipment should be maintained.

•Maximum mounting height for the device is 2 meters.

Step 3: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your DIP-20. For best results, we recommend that you

always use Kramer high-performance cables to connect AV equipment to the DIP-20.

Step 4: Set DIP-switches

Video Switching Selection

DIP-switch 1 DIP-switch 2 Video Input Selection

DIP-switch 1

DIP-switch 2

Video Input Selection

Off (up)

Automatic—Last connected. Where more than one source is

connected the last one connected has priority

Off (up)

On (down)

Automatic—Priority selection.

HDMI 1 →HDMI 2 →PC IN (default, high to low priority)

On (down)

Off (up)

Manual

On (down)

Manual

Audio Switching Selection

DIP-switch 3

DIP-switch 4

Audio Input Selection

Off (up)

Automatic—Priority selection.

Embedded HDMI™→analog Audio In (high to low priority)

Off (up)

On (down)

Automatic—Priority selection.

Analog Audio In →embedded HDMI (high to low priority)

On (down)

Off (up)

Embedded HDMI

On (down)

Analog Audio In

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Step 5: Connect power

Connect the power cord to DIP-20 and plug it into the mains electricity.

Safety Instructions (See www.kramerav.com for updated safety information)

Caution:

•For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning: