7
KRAUSMANN POWER TOOLS 2200
There are four modes with the Pythagorean
Theorem in case that user gets hard to
reach the target.
Calculate the second leg of the triangle
by measuring the hypotenuse and the
other leg.
Short press the Area / Volume /
Pythagorean Theorem 5 button three times
to enter «Pythagorean Theorem». A triangle
will appear on the screen and the
hypotenuse will be blinking.
Press the Turn ON / Measuring 1button,
measure the length of hypotenuse A. Press
the Turn ON / Measuring 1button, measure
the length of one leg B. The device will
calculate the length of the other leg X (fig 2).
Calculate the hypotenuse by measuring the
length the other two legs of the triangle.
Short press the Area / Volume /
Pythagorean Theorem 5 button four times.
A triangle will appear on the screen
and one side of it will be blinking.
Press the Turn ON / Measuring 1button,
measure the length of one leg A. Press the
Turn ON / Measuring 1button, measure
the length of other leg B. The device will
calculate the length of the hypotenuse X
(fig 3).
Short press the Area / Volume /
Pythagorean Theorem 5button five times
until the triangle appears on the
screen and one side is blinking.
Press the Turn ON / Measuring 1button,
measure the length of one leg A. Press the
Turn ON / Measuring 1 button, measure
Short press the Area / Volume /
Pythagorean Theorem 5button six times
until the triangle appears on the screen
and the hypotenuse is blinking.
Press the Turn ON / Measuring 1button,
measure the length of one hypotenuse A.
Press the Turn ON / Measuring 1button,
measure the length of another hypotenuse
C. Press the Turn ON / Measuring 1button,
measure the length of one leg B. The device
calculates the length of the leg in full line
X (fig 5).
Legs must be shorter than hypotenuse, or
there will be «err» shows on screen. In order
to guarantee the accuracy, please make
sure all measurements are starting from
the same point.
Measurement with Pythagorean
Theorem
First case
Second case
Third case
Fourth case
the length of the middle line B. Press the
Turn ON / Measuring 1button, measure
the length of the other leg C. The device
will calculate the length of the leg Xin full
line (fig 4).
The device can be used for length addition
and subtraction. Press the Addition 7button
and the Subtraction / Sound 6button to
select the function once you get the length
measuring result.
Short press the Addition 7button, «+»
shows in the main display 8 area, entering
cumulation mode. The value of the last
measurement and the result of cumulation
will be showed on the screen.
Short press the Subtraction / Sound 6
button, «-» shows in the main display 8
area, entering regressive mode. The value
of the last measurement and the result of
cumulation will be showed on the screen.
Not only the length can be calculated by
adding and subtracting, but both the area
and the volume.
Addition / Subtraction
English | EN
