L-3 Technologies CyTerra Range R2D Link Guida all'installazione
3998 FAU Blvd., Suite 310, Boca Raton, FL 33431, Phone: 561-961-5585
Certification Exhibit
FCC ID: YKD-25STW4100-019
FCC Rule Part: Subchapter D, Part 90
TÜV SÜD Project Number: 72128221
Manufacturer: L-3 Technologies CyTerra
Model: Range R2D, Range R2D Link
Manual
Approved for Public Release 20 October
2015 by U.S. Army Project Manager I2WD
10/13/2017 Approved for Public Release 20 October
2015 by U.S. Army Project Manager I2WD 1
CyTerra
RANGE-R2D
OPERATION &TRAINING MANUAL
Approved for Public Release 20 October
2015 by U.S. Army Project Manager I2WD
10/13/2017 Approved for Public Release 20 October
2015 by U.S. Army Project Manager I2WD 2
CyTerra
FCC Required Information
•Warning: Changes or modifications to this device not expressly approved by L-3 CyTerra could void the
user’s authority to operate the equipment
•NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
•This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This
equipment is in direct contact with the body of the user under normal operating conditions. This
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Approved for Public Release 20 October
2015 by U.S. Army Project Manager I2WD
10/13/2017 Approved for Public Release 20 October
2015 by U.S. Army Project Manager I2WD 3
CyTerra
LESSON 1
Description and Capabilities
Approved for Public Release 20 October
2015 by U.S. Army Project Manager I2WD
10/13/2017 Approved for Public Release 20 October
2015 by U.S. Army Project Manager I2WD 4
CyTerra
INSTRUCTION POINTS
•The RANGE-R2D system is a portable, handheld, battery-operated system
designed to detect moving and near-stationary targets through walls
constructed of common building materials.
•The system is comprised of a stepped-frequency,continuous-wave radar
transceiver, digital signal processor, display and power supply electronics
enclosed in a rugged, water-resistant, lightweight plastic housing.
•The operator controls consist solely of the two momentary push-button
switches located on the sides of the system.
•The graphics display on the front of the system presents target detection
information and system status.
•The display is easy to use, alerts are simple to interpret, and detection is
nearly immediate.
Approved for Public Release 20 October
2015 by U.S. Army Project Manager I2WD
10/13/2017 Approved for Public Release 20 October
2015 by U.S. Army Project Manager I2WD 5
CyTerra
The RANGE-R2D is lightweight and
compact. It is designed to detect
moving and near stationary objects
through walls constructed of common
building materials.
GENERAL
Approved for Public Release 20 October
2015 by U.S. Army Project Manager I2WD
10/13/2017 Approved for Public Release 20 October
2015 by U.S. Army Project Manager I2WD 6
CyTerra
Item Dimensions
RANGE-
R2D Unit 10”x3.6”x3.9”
(25.4cm x 9.14cm x 9.91cm)
Storage
Container 16.3”x12.8”x6.8”
(41.4cm x 32.51cm x 17.27cm)
11”
4”
4”
MECHANICAL DATA
Item Weight
RANGE-R2D
Unit 3 lbs
(1.36 kg)
Storage
Container 6.1 lbs
(2.77 kg)
Approved for Public Release 20 October
2015 by U.S. Army Project Manager I2WD
10/13/2017 Approved for Public Release 20 October
2015 by U.S. Army Project Manager I2WD 7
CyTerra
•The major components are as follows:
•Rotational View LCD– displays target information. The display will rotate
to match the long axis of system orientation. THIS WILL NOT WORK WITH
THE SYSTEM WITH THE LONG AXIS ORIENTED VERTICALLY.
•Scan Buttons (X2) – to perform all system operations. Scan Buttons will
also rotate to match the LCD screen.
•Battery Lid – secures the battery compartment, keeps moisture away from
the batteries.
•Rearward Antenna – helps reduce false alarm rate, The Operator should
NEVER cover this antenna.
•Receive Antenna – receives radar waves sent from the transmit antenna
•Transmit Antenna – transmits radar waves to locate targets.
INSTRUCTION POINTS
Approved for Public Release 20 October
2015 by U.S. Army Project Manager I2WD
10/13/2017 Approved for Public Release 20 October
2015 by U.S. Army Project Manager I2WD 8
CyTerra
Top Left View Bottom Right View
Scan Button
Receive Antenna
Transmit Antenna
MAJOR COMPONENTS
Scan Button Scan Button
Scan Button
Battery
Lid
Rotational View LCD
Rearward Looking Receive Antenna
Bumpers removed for
Clarity
Approved for Public Release 20 October
2015 by U.S. Army Project Manager I2WD
10/13/2017 Approved for Public Release 20 October
2015 by U.S. Army Project Manager I2WD 9
CyTerra
INSTRUCTION POINTS
•The rearward looking antenna faces the operator and helps reduce the
influence of the operator and other “friendly” movers that could
otherwise appear as targets on the readout display.
•The rearward antenna should never be blocked during operation.
•Avoid blocking the rearward antenna when stabilizing the system.
•For both left- and right-handed use, the operator’s hand will cover the
battery compartment.
•If possible the operator should hold the sensor in the prone position
without blocking the line of site for the rear antenna. Stabilize the sensor
at eye level for best results.
•Keep operator movement to a minimum.
Questo manuale è adatto per i seguenti modelli
1
Indice
