Lantech IPGS-0005T-4 Manuale utente

Lantech

IPGS-0005T-4

4 10/100/1000T PoE at + 1 1000T Industrial Unmanaged Switch

User Manual

V1.00

Jan-2018

Content

Overview............................................................1

Introduction............................................................. 1

Features / Model List .............................................. 2

Packing List............................................................ 3

Safety Precaution ................................................... 3

Hardware Description.........................................4

Dimensions............................................................. 4

Wiring the Power Inputs.......................................... 5

Wiring the Fault Alarm Contact ............................... 6

LED Indicators........................................................ 7

RJ-45 Pin Assignments........................................... 9

Cabling................................................................. 11

Mounting Installation........................................12

DIN-Rail Mounting ................................................ 12

Wall-Mount Plate Mounting (Optional)................... 14

Hardware Installation .......................................15

Installation Steps .................................................. 16

Troubleshooting ...............................................17

Recommendation for Shielded network

cables

STP cables have additional shielding material that is used to reduce external

interference. The shield also reduces the emission at any point in the path of the cable.

Our recommendation is to deploy an STP network cable in demanding electrical

environments. Examples of demanding indoor environments are where the network

cable is located in parallel with electrical mains supply cables or where large inductive

loads such as motors or contactors are in close vicinity to the camera or its cable. It is

also mandatory to use an STP cable where the power device (like IP camera) is used

outdoors or where the network cable is routed outdoors.

Important Notice

Lantech Communications Global, Inc. reserves the right to modify the

equipment, its specification or this manual without prior notice, in the

interest of improving performance, reliability, or servicing. At the time of

publication all data is correct for the operation of the equipment at the

voltage and/or temperature referred to. Performance data indicates typical

values related to the particular product.

No part of this documentation or information supplied may be divulged to

any third party without the express written consent of Lantech

Communications Global Inc. Products offered may contain software which

is proprietary to Lantech Communications Global Inc. The offer or supply of

these products and services does not include or infer any transfer of

ownership.

Interference Issues

This Equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful interference

in a commercial or industrial installation. This equipment generates, uses,

and can radiate radio frequency energy. It may cause harmful interference

to radio communications if the equipment is not installed and used in

accordance with the instructions.

FCC Warning

This Equipment has been tested and found to comply with the limits for a

Class-A digital device, pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy. It may cause harmful interference to radio

communications if the equipment is not installed and used in accordance

with the instructions. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

CE Mark Warning

This is a Class-A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take

adequate measures.

Overview

Introduction

The unmanaged industrial switch is a cost-effective solution and meets

the high reliability requirements demanded by industrial applications.

High-Speed Transmissions

The Industrial switch includes a switch controller that can automatically

sense transmission speeds (10/100/1000 Mbps). The RJ-45 interface

can also be auto-detected, so MDI or MDI-X is automatically selected

and a crossover cable is not required. All Ethernet ports have memory

buffers that support the store-and-forward mechanism. This assures that

data is properly transmitted.

Dual Power Inputs

To reduce the risk of power failure, the Industrial switch provides dual

power inputs. When power failure occurs, the device will automatically

switch to the secondary power input.

Flexible Mounting

The industrial switch is extremely compact and can be mounted on a

DIN-rail or a panel, so it is suitable for any space-constrained

environment.

Wide Operating Temperature

The operating temperature of the Industrial switch is in the range

between -40 ~ 75oC. With such a wide range, you can use the Industrial

switch in some of the harshest industrial environments that exist.

Easy Troubleshooting

LED indicators make troubleshooting quick and easy. Each

10/100/1000T port has 2 LED indicators that display the link status,

transmission speed and collision status. Also other LED indicators help

you diagnose the system immediately.

Features / Model List

Store-and-Forward switching architecture

8K MAC address table

Supports full/half duplex flow control

IEEE 802.3at/af PoE+ standard (PoE models)

Supports MDI/MDI-X auto-crossover

Relay contact to connect with alarm system

Provides flexible mounting: DIN-rail, Panel Mounting*

Model Name

10/100/1000T

Power

Supply

Operating

Temperature

IPGS-0204DSFP-12V

5 (PoE x4)

9.5~56VDC

-40 ~ 75℃

IPGS-0204DSFP-48V

5 (PoE x4)

44~56VDC

-40 ~ 75℃

*Optional

Packing List

1 x Industrial Ethernet Switch (w/ terminal block and DIN-Rail kit)

Caps for RJ45-port

Safety Precaution

Attention

If DC voltage is supplied by an external circuit, please use a

protection device on the power supply input.

Hardware Description

In this paragraph, we will introduce the Industrial switch’s dimensions,

port, cabling information, and wiring installation.

Dimensions

43 x 152 x 105 mm (W x H x D)

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Lantech Interruttore

Lantech

Lantech IES-0005B Series Manuale utente

Lantech

Lantech IES-22812F-2P Manuale utente

Lantech

Lantech IPES-0104GT-4 Manuale utente

Lantech

Lantech IPES-2208CA Manuale utente

Lantech

Lantech IPES-0208CA-12V Manuale utente

Lantech

Lantech IPGS-5 Series Manuale utente

Lantech

Lantech IES-5216DF Manuale utente

Lantech

Lantech Treo 500 Manuale utente

Lantech

Lantech IPES-0005B Series Manuale utente

Lantech

Lantech IGS-3208MGSFP Manuale utente

Lantech

Lantech IPES-5408T Manuale utente

Lantech

Lantech LES-2400-RPS Manuale utente

Lantech

Lantech IPES-5416DF Series Manuale utente

Lantech

Lantech IPES-5222T Series Manuale utente

Lantech

Lantech IES-2008B-DNV Manuale utente

Lantech

Lantech IPES-5408T-43 Manuale utente

Lantech

Lantech LPES-2224C Manuale utente

Lantech

Lantech IGS-0208GSFP Manuale utente

Lantech

Lantech IPES-0008A Series Manuale utente

Lantech

Lantech IPES/IES-5416DFT Series Manuale utente

Lantech

Lantech IES-5416DF Series Manuale utente

Lantech

Lantech IPES-3424DSFP-2P Manuale utente

Lantech

Lantech IGS-0008A Manuale utente

Lantech

Lantech IGS-0016 Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente