Lantech IPES-0008A Series Manuale utente
IPES/IES-0008A Series
8 10/100TX (w/8 PoE at/af) Industrial Un-Managed Switch
User Manual
IP-67
IP-43
Apr. 2014
Important Notice
Lantech Communications Global, Inc. reserves the right to modify the
equipment, its specification or this manual without prior notice, in the interest
of improving performance, reliability, or servicing. At the time of publication
all data is correct for the operation of the equipment at the voltage and/or
temperature referred to. Performance data indicates typical values related to
the particular product.
No part of this documentation or information supplied may be divulged to any
third party without the express written consent of Lantech Communications
Global Inc. Products offered may contain software which is proprietary to
Lantech Communications Global Inc. The offer or supply of these products
and services does not include or infer any transfer of ownership.
Interference Issues
This Equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
commercial or industrial installation. This equipment generates, uses, and
can radiate radio frequency energy. It may cause harmful interference to
radio communications if the equipment is not installed and used in
accordance with the instructions.
FCC Warning
This Equipment has been tested and found to comply with the limits for a
Class-A digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy. It may cause harmful interference to radio
communications if the equipment is not installed and used in accordance
with the instructions. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CE Mark Warning
This is a Class-A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.
Content
Chapter 1 Introduction ........................................... 4
Specification........................................................... 4
Chapter 2 Hardware Description............................ 7
2.1 Physical Dimension....................................... 7
2.2 Package Content: ......................................... 9
2.3 IP Protection................................................10
2.4 LED Indicators .............................................13
Chapter 3 Hardware Installation .......................... 14
4
Chapter 1 Introduction
Lantech IES-0008A & IPES-0008A (IP67/IP43) series is a high performance IP67/IP43
industrial switch with 8x10/100TX (w/8 PoE at/af injectors-IPES model)by M12
connectors which provides L2 wire speed and advanced security function for connecting
PD network.
Specification
IES-0008A series
Hardware Specification
IEEE
Standard
IEEE802.3 10BASE-T Ethernet
IEEE802.3u 100BASE-T Ethernet
IEEE802.3x Flow Control and Back
Pressure
Transfer
Rate
14,880pps for Ethernet port
148,800pps for Fast Ethernet port
Mac
Address
8K MAC address table
Connector
10/100T: 8 x M12, 4-pole D-coded,
Female with auto MDI/MDI-X function
Power connector: 1 x M12, 5-pole A-
coded, Male
Protocol
CSMA/CD
LED
Per unit: Power 1 (Green), Power 2
(Green),
Ethernet: Link/Activity (Green)
Power
Supply
Redundant power DC 12V ~72V
HV model power
85~265VAC/110V~300VDC
Power
Consumpti
on
6Watts
Operating
Humidity
5% to 95% (Non-condensing)
Operating
Temperatu
re
-40°C ~ 75°C (-40°F ~ 167°F)
Storage
Temperatu
re
-40°C ~ 85°C (-40°F ~ 185°F)
Case
Dimension
Aluminum case. IP-67,
215mm(W)x185mm(H)x71mm(D)
Aluminum case, IP-43
202mm(W)x172mm(H)x62.5mm(D)
Weight
IP67:2kgs ; IP43: 750gs
Installation
Din Rail, Wall Mount Design
EMC
FCC Class A,
5
CE EN61000-4-2 (ESD),
CE EN61000-4-3 (RS),
CE EN-61000-4-4 (EFT),
CE EN61000-4-5 (Surge),
CE EN61000-4-6 (CS),
CE EN61000-4-8 (Magnetic Field),
CE EN61000-6-2,
CE EN61000-6-4
Stability
Testing
IEC61373 (Shock),
IEC60068-2-32 (Free fall),
IEC61373 (Vibration)
Standard
EN50155 Compliant*
EN50121-3-2 Compliant*
EN50121-4 Compliant*
NEMA TS2 Compliant*
E-Mark*
Warranty
5 years
*Pending
IPES-0008A series
Hardware Specification
IEEE
Standard
IEEE802.3 10BASE-T Ethernet
IEEE802.3u 100BASE-T Ethernet
IEEE802.3x Flow Control and Back
Pressure
IEEE802.3at/af Power over Ethernet
Transfer
Rate
14,880pps for Ethernet port
148,800pps for Fast Ethernet port
Mac
Address
8K MAC address table
Connector
10/100T: 8 x M12, 4-pole D-coded,
Female with auto MDI/MDI-X function
Power connector: 1 x M23, 5-pole A-
coded, Male
Relay contact : 1 x M12 5-pole A-coded
Protocol
CSMA/CD
LED
Per unit: Power 1 (Green), Power 2
(Green),
Ethernet: Link/Activity (Green)
PoE Pin
Assignme
nt
RJ-45 port # 1~#8 support IEEE
802.3af/at End-point, Alternative A mode.
Per port provides 15.4W/30W ability.
Positive (VCC+): RJ-45 pin 1,2.
Negative (VCC-): RJ-45 pin 3,6.
Power
Supply
12~56VDC for Ethernet Data
12~56VDC for PoE feeding
-48VDC is available for single power input
72VDC for Data (10W); PoE (100W)
Power
Consumpti
on
10W
Power
Budget
240W for 802.3at 54V input
120W for 802.3af 48V input
90W for 12V input
120W for 24V input
100W for 72V Input
Operating
Humidity
5% to 95% (Non-condensing)
Operating
Temperatu
re
-40°C ~ 75°C (-40°F ~ 167°F)
6
Storage
Temperatu
re
-40°C ~ 85°C (-40°F ~ 185°F)
Case
Dimension
Aluminum case. IP-67,
215mm(W)x185mm(H)x71mm(D)
Aluminum case, IP-43
202mm(W)x172mm(H)x62.5mm(D)
Weight
IP67:2kgs ; IP43: 750gs
Installation
Din Rail, Wall Mount Design
EMC
FCC Class A,
CE EN61000-4-2 (ESD),
CE EN61000-4-3 (RS),
CE EN-61000-4-4 (EFT),
CE EN61000-4-5 (Surge),
CE EN61000-4-6 (CS),
CE EN61000-4-8 (Magnetic Field),
CE EN61000-6-2,
CE EN61000-6-4
Stability
Testing
IEC61373 (Shock),
IEC60068-2-32 (Free fall),
IEC61373 (Vibration)
Standard
EN50155 Compliant
EN50121-3-2 Compliant
EN50121-4 Compliant
NEMA TS2 Compliant*
E-Mark*
Warranty
5 years
*Pending
7
Chapter 2 Hardware Description
In this paragraph, it will describe the Industrial switch’s hardware spec, port, cabling
information, and wiring installation.
2.1 Physical Dimension
Aluminum case. IP-67,
285 (W) x 201.4 (D) x 84.4 (H) mm
8
Port description of IP-67 series switch
Aluminum case. IP-43,
273 (W) x 188.4(D) x 84.4 (H) mm
**The port description of IP-43 model is the same as of IP-67 one.
9
2.2 Package Content:
Manual CD Product Console cable
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Lantech Interruttore
Lantech
Lantech IGS-2206C Manuale utente
Lantech
Lantech Treo 500 Manuale utente
Lantech
Lantech IES-2008B-DNV Manuale utente
Lantech
Lantech IES-5216DF Manuale utente
Lantech
Lantech IES-3416DSFP Manuale utente
Lantech
Lantech IES-22812F-2P Manuale utente
Lantech
Lantech IPES-0104FA Manuale utente
Lantech
Lantech TPGS-L6208XT Manuale utente
Lantech
Lantech IES-2208C Manuale utente
Lantech
Lantech IPGS-0005T-4-12V Manuale utente
Lantech
Lantech IPGS-0016 Manuale utente
Lantech
Lantech LGS-2300-RPS Manuale utente
Lantech
Lantech IES-2008 Manuale utente
Lantech
Lantech 2204F Series Manuale utente
Lantech
Lantech TGS-R6616XFT Manuale utente
Lantech
Lantech LGS-1104 Manuale utente
Lantech
Lantech IPES-3408GSFP Manuale utente
Lantech
Lantech LGS-2816C-RPS Manuale utente
Lantech
Lantech IPES/IES-5416DFT Series Manuale utente
Lantech
Lantech IES-5416T Series Manuale utente
