Lantech IPES-0208 Series Manuale utente
IPES/IES-0208 Series
8 10/100TX+ 2 10/100/1000T or 1000FX (w/8 PoE at/af) IP67/IP54
rated Industrial Unmanaged Switch
User Manual
IPES-0208GF-67
IPES-0208T-67
Aug 2021
Recommendation for Shielded network cables
STP cables have additional shielding material that is used to reduce external interference.
The shield also reduces the emission at any point in the path of the cable. Our
recommendation is to deploy an STP network cable in demanding electrical environments.
Examples of demanding indoor environments are where the network cable is located in
parallel with electrical mains supply cables or where large inductive loads such as motors
or contactors are in close vicinity to the camera or its cable. It is also mandatory to use an
STP cable where the power device (like IP camera) is used outdoors or where the network
cable is routed outdoors.
Important Notice
Lantech Communications Global, Inc. reserves the right to modify the
equipment, its specification or this manual without prior notice, in the interest
of improving performance, reliability, or servicing. At the time of publication
all data is correct for the operation of the equipment at the voltage and/or
temperature referred to. Performance data indicates typical values related to
the particular product.
No part of this documentation or information supplied may be divulged to any
third party without the express written consent of Lantech Communications
Global Inc. Products offered may contain software which is proprietary to
Lantech Communications Global Inc. The offer or supply of these products
and services does not include or infer any transfer of ownership.
Interference Issues
This Equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
commercial or industrial installation. This equipment generates, uses, and
can radiate radio frequency energy. It may cause harmful interference to
radio communications if the equipment is not installed and used in
accordance with the instructions.
FCC Warning
This Equipment has been tested and found to comply with the limits for a
Class-A digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy. It may cause harmful interference to radio
communications if the equipment is not installed and used in accordance
with the instructions. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CE Mark Warning
This is a Class-A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.
Content
Chapter 1 Introduction.............................................5
Chapter 2 Hardware Description ............................6
2.1 Physical Dimension........................................ 6
2.2 Package Content:........................................... 8
2.3 IP Protection................................................... 8
2.4 LED Indicators.............................................. 11
Chapter 3 Hardware Installation...........................12
5
Chapter 1 Introduction
Lantech IPES-0208 series are 8 10/100 Base-TX+ 2 10/100/1000T or 1000FX or 100FX
(w/8 PoE at/af injectors) with M12-connctor unmanaged industrial switches for IP67 or
IP54 rated protection, which meets the high reliability requirements demanded by
industrial rolling stock applications.
Model List:
IPES-0208GF
8 10/100TX + 2 1000FX w/ 8 PoE at/af Industrial Unmanaged
Switch
IES-0208GF
8 10/100TX + 2 1000FX Industrial Unmanaged Switch
IPES-0208T
8 10/100TX + 2 10/100/1000T w/ 8 PoE at/af Industrial
Unmanaged Switch
IES-0208T
8 10/100TX + 2 10/100/1000T Industrial Unmanaged Switch
6
Chapter 2 Hardware Description
In this paragraph, it will describe the Industrial switch’s hardware spec, port, cabling
information, and wiring installation.
2.1 Physical Dimension
Aluminum case. IP-67,
IPES-0208GF
215mm(W)x185mm(H)x91.2mm(D)
IES-0208GF
215mm(W)x192.5mm(H)x76.7mm(D)
IPES-0208T
215mm(W)x185mm(H)x91.2mm(D)
IES-0208T
215mm(W)x185mm(H)x71mm(D)
Aluminum case. IP-54,
IPES-0208GF
182mm(W)x179mm(H)x91mm(D)
IES-0208GF
182mm(W)x179mm(H)x76.5mm(D)
IPES-0208T
182mm(W)x179.5mm(H)x91mm(D)
IES-0208T
182mm(W)x180.3mm(H)x77.3mm(D)
7
Port description of IP67-rated switch
**The port description of IP54 model is the same as of IP67 one.
8
2.2 Package Content:
Industrial Switch
Quick Installation Guide (available since Jan 2017)
2.3 IP Protection
The IP Code, Ingress Protection Rating, sometimes also interpreted as International
Protection Rating, classifies and rates the degree of protection provided against the
intrusion (including body parts such as hands and fingers), dust, accidental contact, and
water in mechanical casings and with electrical enclosures. It is published by the
International Electrotechnical Commission (IEC)
Solid particle protection
The first digit indicates the level of protection that the enclosure provides against access
to hazardous parts (e.g., electrical conductors, moving parts) and the ingress of solid
foreign objects.
Level
Object size
protected against
Effective against
0
—
No protection against contact and ingress of objects
1
>50 mm
Any large surface of the body, such as the back of a
hand, but no protection against deliberate contact
with a body part
2
>12.5 mm
Fingers or similar objects
3
>2.5 mm
Tools, thick wires, etc.
4
>1 mm
Most wires, screws, etc.
5
Dust protected
Ingress of dust is not entirely prevented, but it must
9
not enter in sufficient quantity to interfere with the
satisfactory operation of the equipment; complete
protection against contact
6
Dust tight
No ingress of dust; complete protection against
contact
Liquid ingress protection
The second digit indicates the level of protection that the enclosure provides against
harmful ingress of water.
Level
Protected
against
Testing for
Details
0
Not
protected
—
—
1
Dripping
water
Dripping water (vertically
falling drops) shall have no
harmful effect.
Test duration: 10 minutes
Water equivalent to 1 mm
rainfall per minute
2
Dripping
water when
tilted up to
15°
Vertically dripping water
shall have no harmful effect
when the enclosure is tilted
at an angle up to 15°from
its normal position.
Test duration: 10 minutes
Water equivalent to 3 mm
rainfall per minute
3
Spraying
water
Water falling as a spray at
any angle up to 60°from
the vertical shall have no
harmful effect.
Test duration: 5 minutes
Water volume: 0.7 litres per
minute
Pressure: 80–100 kPa
4
Splashing
of water
Water splashing against
the enclosure from any
direction shall have no
harmful effect.
Test duration: 5 minutes
Water volume: 10 litres per
minute
Pressure: 80–100 kPa
Questo manuale è adatto per i seguenti modelli
7
Indice
Altri manuali Lantech Interruttore
Lantech
Lantech IPGS-5008T Series Manuale utente
Lantech
Lantech LPES-2224C Manuale utente
Lantech
Lantech IPES-0104GT-4 Manuale utente
Lantech
Lantech IGS-2404 Manuale utente
Lantech
Lantech IPES-0005B Series Manuale utente
Lantech
Lantech LES-2400-RPS Manuale utente
Lantech
Lantech IES-5416T Series Manuale utente
Lantech
Lantech mini Switch 800 Manuale utente
Lantech
Lantech IPWMR-3006 Manuale utente
Lantech
Lantech IES-2008 Manuale utente
Lantech
Lantech GE-800 Manuale utente
Lantech
Lantech IPES-0008B Series Manuale utente
Lantech
Lantech IPWMR-3204DF Manuale utente
Lantech
Lantech LGS-2816C-RPS Manuale utente
Lantech
Lantech IES-2208CA Manuale utente
Lantech
Lantech IES-2208CA-DNV Manuale utente
Lantech
Lantech IPES-5208T-X Series Manuale utente
Lantech
Lantech IES-5216DF Manuale utente
Lantech
Lantech LGS-2424C Manuale utente
Lantech
Lantech IPES-3408 Series Manuale utente
