LeCroy HDO4000 Manuale utente

HDO4000

High Deﬁnition Oscilloscopes

Getting Started Guide

921445-00 Rev A

700 Chestnut Ridge Road

Chestnut Ridge, NY 10977

1.800.5.LECROY •teledynelecroy.com

Unauthorized duplication of Teledyne LeCroy documentation materials other than for internal sales

and distribution purposes is strictly prohibited. However, clients are encouraged to distribute and

duplicate Teledyne LeCroy documentation for their own internal educational purposes.

HDO and Teledyne LeCroy are trademarks of Teledyne LeCroy. Windows is a registered

trademark of Microsoft Corporation. Other product or brand names are trademarks or requested

trademarks of their respective holders. Information in this publication supersedes all earlier

versions. Specifications are subject to change without notice.

HDO4000

High Deﬁnition Oscilloscopes

Getting Started Guide

921445-00 Rev A

Welcome

Thank you for buying a Teledyne LeCroy product. We’re certain you’ll be pleased with the detailed features so unique to our instruments.

This Getting Started Guide is designed to cover important safety and installation information for your oscilloscope, along with some basic operating

procedures so you’re quickly working with waveforms.

Introduction

About the HDO4000 Oscillosocopes 2

Materials List 2

General Safety Information 3

Support 4

Set Up

The Front of Your Oscilloscope 6

The Side of Your Oscilloscope 8

The Back of Your Oscilloscope 9

Carrying 10

Connecting 10

Powering On/Off 11

Probes 11

Software Activation 12

User Interface

Touch Screen Display 14

Toolbar Shortcuts 16

Language Selection 16

Entering/Selecting Data 17

Front Panel 19

Contents

Basics

Turning On/Off Traces 22

Vertical 23

Horizontal (Timebase) 24

Zoom 25

Math 26

Triggers 27

Cursors 28

Measurements & Statistics 29

Memories (Reference Waveforms) 30

Documenting 31

Temperature Dependent Calibration 32

Software Options 33

Reference

Service 36

Teledyne LeCroy Service Centers 37

Certifications 38

Warranty 40

Windows License Agreement 40

HDO4000 High Deﬁnition

Oscilloscopes

INTRODUCTION

921445-00 Rev A

INTRODUCTION 2

About the HDO4000 Oscillosocopes

Combining Teledyne LeCroy’s HD4096 high-definition technology with

long memory, a compact form factor, 12.1" touch screen display and

powerful debug tools, the HDO4000 Oscillosocopes are ideal for precise

measurements and quick debug. Tools such as WaveScan®Search and

Find, LabNotebook Report Generator and History Mode help identify,

isolate, and document problems for faster troubleshooting.

HD4096

HD4096 high-definition technology consists of high sample rate 12-bit

ADCs, high signal-to-noise input amplifiers, and a low-noise system

architecture. This technology enables HDO™ oscilloscopes to capture

and display signals up to 1 GHz with a high sample rate and 16 times

more resolution than other oscilloscopes.

Waveforms captured and displayed on the HDO4000 with HD4096

technology are cleaner and crisper. Signal details often lost in the noise

are clearly visible and easy to distinguish, and measurements can be

performed with unmatched precision for improved debug and analysis.

Specifications

Detailed specifications are maintained in the Datasheet on the product

page at teledynelecroy.com.

WaveScan Search and Find

WaveScan®Search and Find allows you to search a single acquisition

using more than 20 different criteria. Or, set up a scan condition and

scan for an event over hours or even days.

History Mode

Never miss a waveform. History mode lets you scroll back in time

to view previous waveforms and isolate anomalies. Use cursors and

measurement parameters to quickly find the source of problems. History

mode is always available with a single button press, no need to enable

this mode.

LabNotebook Report Generator

Save and document all your waveforms, settings and screen images

through the LabNotebook report generation tool. With LabNotebook,

there’s no need to navigate multiple menus to save all these files

independently. Returning your oscilloscope to a past state is only one

button press away thanks to LabNotebook’s flashback feature.

Materials List

Check that you have all the parts listed here. Contact Teledyne LeCroy

immediately if any part is missing.

•One (1) oscilloscope

•Two (2) or four (4) passive probes (one for each channel)

•One (1) AC line (power) cord

•One (1) protective front cover

•One (1) Getting Started Guide

•One (1) Oscilloscope Security Certificate

•One (1) Oscilloscope Registration Card

•One (1) Calibration Document

Key Speciﬁcations

Bandwidth 200 MHz – 1 GHz

Channels 2 or 4

Sample Rate (all channels) 2.5 GS/s

Memory (per channel) 12.5 Mpts/ch

Maximum Memory 50 Mpts

921445-00 Rev A

INTRODUCTION 3

General Safety Information

This section contains instructions that must be observed to keep the

instrument operating in a correct and safe condition. You are required

to follow generally accepted safety procedures in addition to the

precautions specified in this section.

The overall safety of any system incorporating this instrument is

the responsibility of the assembler of the system.

Symbols

These symbols appear on the instrument’s front or rear panels and in its

documentation to alert you to important safety considerations.

CAUTION of damage to instrument, or WARNING of hazard to

health. Attend to the accompanying information to protect against

personal injury or damage. Do not proceed until conditions are

fully understood and met.

WARNING. Risk of electric shock.

Measurement ground connection.

Safety (protective) ground connection.

Alternating Current.

On/Standby power.

CAT Installation (Overvoltage) Category rating (I or II) per

EN 61010-2:030:2010 safety standard. See Certifications for details.

Precautions

• Use proper power cord. Use only the power cord shipped with this

instrument and certified for the country of use.

• Maintain ground. This product is grounded through the power

cord grounding conductor. To avoid electric shock, connect only to a

grounded mating outlet.

• Connect and disconnect properly. Do not connect/disconnect

probes or test leads while they are connected to a voltage source.

• Observe all terminal ratings. Do not apply a voltage to any input

(C1, C2, C3, C4 or EXT) that exceeds the maximum rating of that

input. Refer to the front of the oscilloscope for maximum input

ratings.

• Use only within operational environment listed. Do not use in

wet or explosive atmospheres.

• Use indoors only.

• Keep product surfaces clean and dry.

• Do not block the cooling vents. Leave a minimum six-inch gap

between the instrument and the nearest object. Keep the underside

clear of papers and other objects.

• Do not remove the covers or inside parts. Refer all maintenance to

qualified service personnel.

• Do not operate with suspected failures. Do not use the product

if any part is damaged. Obviously incorrect measurement behaviors

(such as failure to calibrate) might indicate impairment due to

hazardous live electrical quantities. Cease operation immediately and

sequester the instrument from inadvertent use.

921445-00 Rev A

INTRODUCTION 4

Operational Environment

Temperature: 5° to 40° C

Humidity: Maximum relative humidity 90% for temperatures up to

31° C decreasing linearly to 50% relative humidity at 40° C

Altitudes: up to 3,000 m (at < 30° C)

Power and Ground Connections

The instrument operates from a single-phase, 100 to 240 Vrms (± 10%)

AC power source at 50/60/400 Hz (± 10%). Manual voltage selection

is not required because the instrument automatically adapts to the line

voltage.

The AC inlet ground is connected directly to the frame of the instrument.

For adequate protection again electric shock, connect to a mating outlet

with a safety ground contact.

WARNING. Interrupting the protective conductor inside or

outside the oscilloscope, or disconnecting the safety ground

terminal, creates a hazardous situation. Intentional interruption

is prohibited.

Maximum power consumption with all accessories installed (e.g., active

probes, USB peripherals) is 320 W (320 VA) for four-channel models and

275 W (275 VA) for two-channel models. Power consumption in standby

mode is 4 W.

Cleaning

Clean only the exterior of the oscilloscope using a damp, soft cloth. Do

not use harsh chemicals or abrasive elements. Under no circumstances

submerge the instrument or allow moisture to penetrate it. Avoid

electric shock by unplugging the power cord from the AC outlet

before cleaning.

CAUTION. Do not attempt to clean internal parts.

Support

Online Documentation

Teledyne LeCroy publishes a free Technical Library on its website.

Manuals, tutorials, application notes, white papers, and videos are

available to help you get the most out of your Teledyne LeCroy products.

The HDO4000 Oscillosocopes Operator’s Manual can be downloaded

from teledynelecroy.com/hdo4000. This .PDF document contains more

extensive procedures for operating your oscilloscope than are found

here. You can also download Oscilloscope System Recovery Tools and

Procedures, which contains instructions for using Acronis® True Image®

Home included with the oscilloscope.

The Datasheet published on the product page contains the detailed

product specifications.

Technical Support

Registered users can contact their local Teledyne LeCroy service center

at the number listed in this guide to make Technical Support requests by

phone or email. You can also submit Technical Support requests via the

website at teledynelecroy.com/support/techhelp.

HDO4000 High Deﬁnition

Oscilloscopes

SET UP

921445-00 Rev A

SET UP 6

The Front of Your Oscilloscope

Touch Screen Display

Front Panel

Built-in Stylus Holder

USB Ports

Ground and Calibration

Output Terminals

Channel Inputs

Power Button

Rotating / Tilting Feet

Indice

Altri manuali LeCroy Apparecchiature di prova

LeCroy

LeCroy 4300B Manuale utente

LeCroy

LeCroy Xs-A Manuale utente

LeCroy

LeCroy ZD200 Manuale utente

LeCroy

LeCroy WaveAce series Manuale elenco delle parti

LeCroy

LeCroy WaveMaster 8 Zi Manuale elenco delle parti

LeCroy

LeCroy WavePro 7 Zi series Manuale utente

LeCroy

LeCroy WaveAce 202 Manuale utente

LeCroy

LeCroy LSA1000 Manuale utente

LeCroy

LeCroy WaveAce 1000 series Manuale utente

LeCroy

LeCroy MS-250 Manuale utente

LeCroy

LeCroy XI SERIES Manuale utente

LeCroy

LeCroy WaveMaster 8 Zi Manuale elenco delle parti

LeCroy

LeCroy WaveRunner 6000A Series Manuale utente

LeCroy

LeCroy LC Series Manuale utente

LeCroy

LeCroy WaveJet 300A series Manuale utente

LeCroy

LeCroy 9410 Manuale d'uso e manutenzione

LeCroy

LeCroy WaveSurfer MXs-B Manuale utente

LeCroy

LeCroy PP006D Manuale utente

LeCroy

LeCroy HDO6000 Manuale utente

LeCroy

LeCroy Digital Oscilloscopes Manuale utente

LeCroy

LeCroy 9450 Manuale utente

LeCroy

LeCroy 6000 SERIES Manuale utente

LeCroy

LeCroy WaveSurfer MXs-B Manuale elenco delle parti

LeCroy

LeCroy PP011 Manuale utente

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente