LEPSI Watch Dock Manuale utente
USER GUIDE
HIGH TECHNOLOGY DEMAGNETIZER
The exposure of your watch to magnetic fields may interfere with its normal
operation, whether you own a mechanical, automatic or quartz model.
Although these fields are not damaging to your timepiece, their influence can
affect its accuracy or even stop the watch completely. The major effects of
magnetism on a watch are quite clear. Under the influence of a low-intensity
magnetic field, a slight disturbance of the watch’s normal functioning may be
noticed.
However, a strong magnetic field may have an effect on the movement of a
mechanical watch and alter the normal functioning of the balance spring.
Steel components are even more sensitive to magnetism and create magnetic
fields inside the movement. The watch’s functioning could then undergo
significant interference, or even stop completely in the magnetic field.
An operation called “demagnetization”, which involves no risk to your watch,
will be undertaken. In the majority of cases, the setting of the movement and
the width of the balance will return to normal after this operation. Lepsi
designed the Watch Dock, it allows you to demagnetize your watch easily in
just a few seconds.
PACKAGE CONTENT
- One Watch Dock
- One hexagonal key
- One shunt
2
CONTROL AND DEMAGNETIZE YOUR WATCH
- Put your watch on the Watch Dock
- Press the button
THE BUTTON FLACHES GREEN
The Watch Dock will detect the magnetic fields of your watch. He will
demagnetize it only if it is necessary.
THE BUTTON FLACHES RED
In case your watch generates a magnetic field, the Watch Dock will
automatically demagnetize your watch
DEMAGNETIZE YOUR WATCH (without detection of the magnetic fields)
- Put your watch on the Watch Dock
- Press the button twice, slowly
THE BUTTON FLACHES RED during the demagnetization process
AT THE END OF THE PROCESS THE WATCH DOCK TURNS OFF AUTOMATICALLY
3
DOCK + SCOPE
You can control the chronometry of your watch while demagnetizing it. For
the use of the Watch Scope you can refer to the user guide of this one. (The
watch scope is sold separately)
BATTERY
Your watch scope is equipped with 4 LR3 AAA 1.5v batteries. Their lifespan
is around 300 demagnetization cycle. When the batteries are worn, the
button flashes ORANGE, it's time to replace them. Here's how to do it:
- 1 -
remove the 4 screws
with the key provided
- 2 –
Insert the 4 LR3
AAA batteries
4
- Put the Watch Scope in
the slot
- Put the watch in touch
with the Watch Scope
CONNECTIVITY
Simple, Reliable, Universal: wireless,
battery LR3/AAA x4 powered
WEIGHT AND DIMENSIONS
Diameter 120mm - Height 40 mm - Weight 500 g
COMPATIBILITY
All mechanical watches
MATERIELS AND MANUFACTURING
ABS body, electronics 100% SWISSMADE
WARRANTY
3 years
5
MANUFACTURER’S WARRANTY
Watch Scope is guaranteed for 3 years after the purchase date against all
manufacturing defects. The warranty is only valid upon presentation of
proof of purchase or a valid receipt.
WARRANTY RESTRICTIONS
Damages due to normal wear and tear such as scuffs, scratches, marks,
cuts, colour fading, etc. are not covered by the warranty. Damages caused
by misuse or improper use of the product such as mishandling, shock,
breakage, etc. are not covered by the warranty. Damages caused by using
the product in poor environment conditions such as humid places,
exposure to water, to vibrations or to sources of high heat, etc. will not be
covered by the warranty.
LIABILITY
LEPSI may in no case be held responsible for harm caused by misuse of the
Watch Scope measurement system or for damage caused to watches,
goods or people.
6
Indice
Altri manuali LEPSI Strumento di misura
