Linear Technology DC1948A Guida rapida alla configurazione

dc1948af

DEMO MANUAL DC1948A

Description

LT3090

–36V, 600mA Negative Linear Regulator

with Programmable Current Limit

Demonstration circuit 1948A is a 600mA low dropout

negative linear regulator featuring theLT

3090. This device

is designed for applications requiring negative output volt-

age, high current with no heat sink, output adjustability to

zero and low dropout voltage.

The LT3090 features fast transient response, high PSRR

and low output noise. The LT3090 supplies 600mA at a

typicaldropoutvoltageof300mV.Operatingquiescentcur-

rent is nominally 1mA and drops to << 1μA in shutdown.

A single resistor adjusts the LT3090’s precision program-

mable current limit. The LT3090’s positive or negative

current monitor either sources a current (0.5mA/A) or

L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear

Technology Corporation. All other trademarks are the property of their respective owners.

performance summary

sinks a current (1mA/A) proportional to output current.

Built-in protection includes reverse output protection,

internal current limit with foldback and thermal shutdown

with hysteresis.

The LT3090 is offered in a 10 pin DFN package and a

16-lead MSOP package.

The LT3090 data sheet gives a complete description of

the device, operation and application information. The data

sheet should be read in conjunction with this quick start

guide for working on or modifying the demo circuit 1948A.

Design files for this circuit board are available at

http://www.linear.com/demo/DC1948A

Specifications are at TA= 25°C

SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS

VIN Input Supply Range VOUT = 1.2V, IOUT1 = 1mA –36 –1.5 V

VOUT Output Voltage Shunt at 1, 2 for JP1 –1.286 –1.25 –1.213 V

Shunt at 3, 4 for JP1 –2.575 –2.5 –2.425 V

Shunt at 5, 6 for JP1 –5.15 –5 –4.85 V

Shunt at 7, 8 for JP1 –12.36 –12 –11.64 V

Shunt at 9, 10 for JP1 –15.45 –15 –14.55 V

Shunt at 11, 12 for JP1 and R10 Stuffed as 357kΩ –18.54 –18 –17.46 V

IOUT Output Current R1 = 10k, (Note 1) 600 mA

Note 1. This is for the typical condition when VIN – VOUT < 5V. Current limit varies with different values of VIN – VOUT. Refer to the LT3090 data sheet

for details.

Downloaded from Arrow.com.

dc1948af

DEMO MANUAL DC1948A

Quick start proceDure

Demonstration circuit 1948A is easy to set up to evalu-

ate the performance of the LT3090. Refer to Figure 1 for

proper measurement equipment setup and follow the

procedure below:

NOTE. When measuring the input or output voltage

ripple, care must be taken to avoid a long ground lead

on the oscilloscope probe. Measure the input or output

voltage ripple by touching the probe tip directly across

the terminals of the input or output capacitors. See

Figure 2 for proper scope probe technique.

1. Use JP2 to set the desired output voltage.

2. Put JP4 on ON position.

3. With power off, connect the input power supply to VIN

and GND.

4. Turn on the power at the VIN.

NOTE. Make sure that the VIN voltage does not exceed

–36V.

5. Check for the proper output voltages:

NOTE. If there is no output, temporarily disconnect the

load to make sure that the load is not set too high or

is shorted.

6. Once the proper output voltages are established, adjust

the loads within the operating range and observe the

output voltage regulation, efficiency and other param-

eters.

NOTE. Make sure that the power dissipation is limited

below the thermal limit.

Figure 2. Measuring Input or Output Ripple

Figure 1. DC1948A Proper Equipment Setup

Downloaded from Arrow.com.Downloaded from Arrow.com.

dc1948af

DEMO MANUAL DC1948A

positive or negative current monitor configuration

cable Drop compensation configuration

Figure 5. Temperature Rise at 2.1W Dissipation

There are both positive and negative current monitors on

the LT3090. The configurations for these two monitors are

different. When the positive current monitor is in use, JP1

needs to be configured on IMP position and JP3 needs to

be configured on +3V position. Meantime a +3V external

power supply needs to be connected to +3V turret. Figure 3

shows this configuration.

When the negative current monitor is in use, JP1 needs

to be configured on VIN position and JP3 needs to be

configured on IMN position. There is no external power

supply needed. Figure 4 shows this configuration.

thermal image

Figure 3. Positive Current Monitor Configuration

Figure 4. Negative Current Monitor Configuration

Demo Circuit 1948A can be configured to evaluate the

cable drop compensation on the LT3090. Note that cable

drop compensation is only using negative current monitor

configuration. JP1, JP3 and R12 shall be configured. JP1

needs to be configured on VIN position. JP3 needs to be

configured on CDC position. R12 needs be replaced by a

calculated value which has the following relationship with

the total output cable impedance (RCBL) below. R12 and

RCBL are both in kΩ:

R12 = RCBL • 1k

An example thermal image shows the temperature distri-

bution on board. The test is complete in still air at room

temperature with 2.1W power dissipation in the LT3090.

This gives the IC case-to-ambient thermal resistance of

about θJA = 24°C/W on the demo board.

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

dc1948af

DEMO MANUAL DC1948A

parts list

ITEM QTY REFERENCE PART DESCRIPTION MANUFACTURER/PART NUMBER

Required Circuit Components

1 2 C1, CIN2 CAP, X7R 4.7µF 50V 10% 1206 TDK C3216X7R1H475KT

2 1 C2 CAP, X7R 0.1µF 16V 10% 0603 AVX 0603YC104KAT2A

3 1 C4 CAP, X7R 1µF 10V 10% 0603 TAIYO YUDEN LMK107BJ105KA

4 1 R1 RES, CHIP 10k 0.1W 1% 0805 VISHAY CRCW080510K0FKTA

5 1 R2 RES, CHIP 49.9k 0.1W 1% 0805 VISHAY CRCW080549K9FKTA

6 1 R4 RES, CHIP 2k 0.06W 1% 0603 VISHAY CRCW06032K00FKEA

7 1 R5 RES, CHIP 24.9k 0.06W 1% 0603 VISHAY CRCW060324K9FKEA

8 1 R6 RES, CHIP 49.9k 0.06W 1% 0603 VISHAY CRCW060349K9FKEA

9 1 R7 RES, CHIP 100k 0.06W 1% 0603 VISHAY CRCW0603100KFKEA

10 1 R8 RES, CHIP 243k 0.06W 1% 0603 VISHAY CRCW0603243KFKEA

11 1 R9 RES, CHIP 301k 0.06W 1% 0603 VISHAY CRCW0603301KFKEA

12 1 R11 RES, CHIP 1k 0.06W 1% 0603 VISHAY CRCW06031K00FKEA

13 1 R12, R14 RES, CHIP 0Ω 0.25W 5A 0603 VISHAY CRCW06030000Z0EA

14 1 U1 IC, NEGATIVE LINEAR REG DFN(10) (DD) 3mm × 3mm LINEAR TECHNOLOGY CORPORATION LT3090EDD

Additional Demo Board Circuit Components

1 1 CIN1 CAP, ALUM 10µF 50V 10% SUNCON 50CE10BSS

2 0 C3 (OPT) CAP, 1206

3 0 R10, R13, R15 (OPT) RES, 0603

Hardware: For Demo Board Only

1 8 E1, E2, E3, E4, E6,

E7, E8, E9

TURRET, TESTPOINT MILL MAX 2501-2-00-80-00-00-07-0

21 JP1 HEADERS, DBL ROW 2 × 2 2mm CTRS SAMTEC TMM-102-02-L-D

31 JP2 HEADERS, DBL ROW 2 × 6 2mm CTRS SAMTEC TMM-106-02-L-D

4 1 JP3 HEADERS, DBL ROW 2 × 3 2mm CTRS SAMTEC TMM-103-02-L-D

5 1 JP4 HEADERS, 2mm CTRS SAMTEC ASP-157349-01

6 4 XJP1, XJP2, XJP3,

XJP4

SHUNT, 2mm CTRS SAMTEC 2SN-BK-G

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

dc1948af

DEMO MANUAL DC1948A

Information furnished by Linear Technology Corporation is believed to be accurate and reliable.

However, no responsibility is assumed for its use. Linear Technology Corporation makes no representa-

tion that the interconnection of its circuits as described herein will not infringe on existing patent rights.

schematic Diagram

D D

C C

B B

A A













 



REVISION HISTORY

DESCRIPTION DATE

APPROVED

ECO REV

EDWIN LIPRODUCTION



Aug 20, 2013

REVISION HISTORY

DESCRIPTION DATE

APPROVED

ECO REV

EDWIN LIPRODUCTION



Aug 20, 2013

REVISION HISTORY

DESCRIPTION DATE

APPROVED

ECO REV

EDWIN LIPRODUCTION



Aug 20, 2013

SIZE

MODIFY DATE:

IC NO. REV.

SHEET OF

TITLE:

APPROVALS

PCB DES.

APP ENG.

TECHNOLOGY











CUSTOMER NOTICE

LINEAR TECHNOLOGY HAS MADE A BEST EFFORT TO DESIGN A

CIRCUIT THAT MEETS CUSTOMER-SUPPLIED SPECIFICATIONS;

HOWEVER, IT REMAINS THE CUSTOMER'S RESPONSIBILITY TO

VERIFY PROPER AND RELIABLE OPERATION IN THE ACTUAL

APPLICATION. COMPONENT SUBSTITUTION AND PRINTED

CIRCUIT BOARD LAYOUT MAY SIGNIFICANTLY AFFECT CIRCUIT

PERFORMANCE OR RELIABILITY. CONTACT LINEAR

TECHNOLOGY APPLICATIONS ENGINEERING FOR ASSISTANCE.

THIS CIRCUIT IS PROPRIETARY TO LINEAR TECHNOLOGY AND

SCHEMATIC

SUPPLIED FOR USE WITH LINEAR TECHNOLOGY PARTS.

SCALE = NONE

www.linear.com













EDWIN LI





SIZE

MODIFY DATE:

IC NO. REV.

SHEET OF

TITLE:

APPROVALS

PCB DES.

APP ENG.

TECHNOLOGY











CUSTOMER NOTICE

LINEAR TECHNOLOGY HAS MADE A BEST EFFORT TO DESIGN A

CIRCUIT THAT MEETS CUSTOMER-SUPPLIED SPECIFICATIONS;

HOWEVER, IT REMAINS THE CUSTOMER'S RESPONSIBILITY TO

VERIFY PROPER AND RELIABLE OPERATION IN THE ACTUAL

APPLICATION. COMPONENT SUBSTITUTION AND PRINTED

CIRCUIT BOARD LAYOUT MAY SIGNIFICANTLY AFFECT CIRCUIT

PERFORMANCE OR RELIABILITY. CONTACT LINEAR

TECHNOLOGY APPLICATIONS ENGINEERING FOR ASSISTANCE.

THIS CIRCUIT IS PROPRIETARY TO LINEAR TECHNOLOGY AND

SCHEMATIC

SUPPLIED FOR USE WITH LINEAR TECHNOLOGY PARTS.

SCALE = NONE

www.linear.com













EDWIN LI





SIZE

MODIFY DATE:

IC NO. REV.

SHEET OF

TITLE:

APPROVALS

PCB DES.

APP ENG.

TECHNOLOGY











CUSTOMER NOTICE

LINEAR TECHNOLOGY HAS MADE A BEST EFFORT TO DESIGN A

CIRCUIT THAT MEETS CUSTOMER-SUPPLIED SPECIFICATIONS;

HOWEVER, IT REMAINS THE CUSTOMER'S RESPONSIBILITY TO

VERIFY PROPER AND RELIABLE OPERATION IN THE ACTUAL

APPLICATION. COMPONENT SUBSTITUTION AND PRINTED

CIRCUIT BOARD LAYOUT MAY SIGNIFICANTLY AFFECT CIRCUIT

PERFORMANCE OR RELIABILITY. CONTACT LINEAR

TECHNOLOGY APPLICATIONS ENGINEERING FOR ASSISTANCE.

THIS CIRCUIT IS PROPRIETARY TO LINEAR TECHNOLOGY AND

SCHEMATIC

SUPPLIED FOR USE WITH LINEAR TECHNOLOGY PARTS.

SCALE = NONE

www.linear.com













EDWIN LI







GND



GND

































 



 















+3V



+3V



























































 

 

 



 



 



GND



GND































































 



 























 



  

 



 



















 

 









 







 



IMONP



IMONP





















































VOUT

-600mA

Max



VOUT

-600mA

Max



IMONN



IMONN















SHDN



SHDN









































































Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

dc1948af

DEMO MANUAL DC1948A

Linear Technology Corporation

1630 McCarthy Blvd., Milpitas, CA 95035-7417

(408) 432-1900 ●FAX: (408) 434-0507 ●www.linear.com

 LINEAR TECHNOLOGY CORPORATION 2013

LT 0913 • PRINTED IN USA

DEMONSTRATION BOARD IMPORTANT NOTICE

Linear Technology Corporation (LT C ) provides the enclosed product(s) under the following AS IS conditions:

This demonstration board (DEMO BOARD) kit being sold or provided by Linear Technology is intended for use for ENGINEERING DEVELOPMENT

OR EVALUATION PURPOSES ONLY and is not provided by LT C for commercial use. As such, the DEMO BOARD herein may not be complete

in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including but not limited to product safety

measures typically found in finished commercial goods. As a prototype, this product does not fall within the scope of the European Union

directive on electromagnetic compatibility and therefore may or may not meet the technical requirements of the directive, or other regulations.

If this evaluation kit does not meet the specifications recited in the DEMO BOARD manual the kit may be returned within 30 days from the date

of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY THE SELLER TO BUYER AND IS IN LIEU

OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS

FOR ANY PARTICULAR PURPOSE. EXCEPT TO THE EXTENT OF THIS INDEMNITY, NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR

ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user releases LT C from all claims

arising from the handling or use of the goods. Due to the open construction of the product, it is the user’s responsibility to take any and all

appropriate precautions with regard to electrostatic discharge. Also be aware that the products herein may not be regulatory compliant or

agency certified (FCC, UL, CE, etc.).

No License is granted under any patent right or other intellectual property whatsoever. LT C assumes no liability for applications assistance,

customer product design, software performance, or infringement of patents or any other intellectual property rights of any kind.

LT C currently services a variety of customers for products around the world, and therefore this transaction is not exclusive.

Please read the DEMO BOARD manual prior to handling the product. Persons handling this product must have electronics training and

observe good laboratory practice standards. Common sense is encouraged.

This notice contains important safety information about temperatures and voltages. For further safety concerns, please contact a LT C applica-

tion engineer.

Mailing Address:

Linear Technology

1630 McCarthy Blvd.

Milpitas, CA 95035

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Linear Technology Scheda madre

Linear Technology

Linear Technology DC1774A-C Guida rapida alla configurazione

Linear Technology

Linear Technology DC2423A Guida rapida alla configurazione

Linear Technology

Linear Technology Analog Devices DC2515B Guida rapida alla configurazione

Linear Technology

Linear Technology DC1537A Guida rapida alla configurazione

Linear Technology

Linear Technology DC1145B Guida rapida alla configurazione

Linear Technology

Linear Technology DC2455A-C Manuale utente

Linear Technology

Linear Technology DC1980A Guida rapida alla configurazione

Linear Technology

Linear Technology DC1496B Guida rapida alla configurazione

Linear Technology

Linear Technology DC2177A-C Guida rapida alla configurazione

Linear Technology

Linear Technology DC2548A Guida rapida alla configurazione

Linear Technology

Linear Technology LTC3773EG Manuale utente

Linear Technology

Linear Technology LT4363 Manuale utente

Linear Technology

Linear Technology DC1763A Guida rapida alla configurazione

Linear Technology

Linear Technology DC2257A Guida rapida alla configurazione

Linear Technology

Linear Technology LTC2418 Guida rapida alla configurazione

Linear Technology

Linear Technology DC1472A Guida rapida alla configurazione

Linear Technology

Linear Technology DC2024A Guida rapida alla configurazione

Linear Technology

Linear Technology DC2520A Guida rapida alla configurazione

Linear Technology

Linear Technology DC1513B Guida rapida alla configurazione

Linear Technology

Linear Technology LT5572 Manuale utente

Linear Technology

Linear Technology DC1729A Guida rapida alla configurazione

Linear Technology

Linear Technology DC1552A Guida rapida alla configurazione

Linear Technology

Linear Technology DC1954A Guida rapida alla configurazione

Linear Technology

Linear Technology DC2077A Guida rapida alla configurazione

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente