Linear Technology LTC2450 Manuale utente

QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 1067

EVALUATION BOARD

LTC2450

DESCRIPTION

Demonstration circuit 1067 features the LTC2450, a

16 bit high performance ΔΣ analog-to-digital con-

verter (ADC). The LTC2450 features 2LSB linearity,

2LSB offset, and 1.4µV RMS noise. The input is sin-

gle ended with a range of 0 (Ground) to Vcc. The

modulator’s proprietary sampling technique reduces

the average input current to less than 50nA – orders

of magnitude lower than typical delta sigma ADCs.

The LTC2450 is available in a 6 pin, 3x3mm DFN

package and has an easy to use SPI interface.

DC1067 is a member of Linear Technology‘s

QuickEval™ family of demonstration boards. It is de-

signed to allow easy evaluation of the LTC2450 and

may be connected directly to the target application’s

analog signals while using the DC590 USB Serial

Controller board and supplied software to measure

performance. The exposed ground planes allow

proper grounding to prototype circuitry. After evaluat-

ing with Linear Technology’s software, the digital sig-

nals can be connected to the end application’s proc-

essor / controller for development of the serial inter-

face.

Design files for this circuit board are available. Call

the LTC factory.

LTC is a trademark of Linear Technology Corporation

Figure 1. Proper Measurement Equipment Setup

Ribbon cable

To DC590

Controller

Single-ended In-

put

Monitor reference / Vcc

or external reference

source (See Hardware

Set-u

QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 1067

EVALUATION BOARD

QUICK START PROCEDURE

Connect DC1067 to a DC590 USB Serial Controller

using the supplied 14 conductor ribbon cable. Con-

nect DC590 to host PC with a standard USB A/B ca-

ble. Run the evaluation software supplied with DC590

or downloaded from http://www.linear.com/software.

The correct program will be loaded automatically.

Click the COLLECT button to start reading the input

voltage. Details on software features are documented

in the control panel’s help menu.

Tools are available for logging data, changing refer-

ence voltage, changing the number of points in the

strip chart and histogram, and changing the number

of points averaged for the DVM display.

Figure 2. Software Screenshot

QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 1067

EVALUATION BOARD

HARDWARE SET-UP

CONNECTION TO DC590 SERIAL CONTROLLER

J1 is the power and digital interface connector.

Connect to DC590 serial controller with supplied 14

conductor ribbon cable.

JUMPERS

JP1 – Select the source for REF+, either an LT6660-

5 or the regulated VCC voltage from the DC590

controller. Removing this jumper allows an external

supply to be connected to the VCC turret post.

ANALOG CONNECTIONS

Analog signal connections are made via the row of

turret posts along the edge of the board. Also, when

connecting the board to an existing circuit the ex-

posed ground planes along the edges of the board

may be used to form a solid connection between

grounds.

GND – Two ground turrets are connected directly to

the internal ground planes.

VCC – This is the supply and reference voltage for

the ADC. Do not draw any power from this point.

VIN – This is the single-ended input to the ADC.

QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 1067

EVALUATION BOARD

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Analog Devices Inc.:

DC1067A-B DC1067A-A

Indice

Altri manuali Linear Technology Scheda madre

Linear Technology

Linear Technology DC1400A Guida rapida alla configurazione

Linear Technology

Linear Technology DC416 Guida rapida alla configurazione

Linear Technology

Linear Technology DC2479A-A Manuale utente

Linear Technology

Linear Technology DC112A Guida rapida alla configurazione

Linear Technology

Linear Technology LTC5584 Manuale utente

Linear Technology

Linear Technology DC875 Manuale utente

Linear Technology

Linear Technology DC1626A Guida rapida alla configurazione

Linear Technology

Linear Technology DC1216A-A Guida rapida alla configurazione

Linear Technology

Linear Technology LTC2268-14 Manuale utente

Linear Technology

Linear Technology DC1464A Manuale utente

Linear Technology

Linear Technology DC1540B Guida rapida alla configurazione

Linear Technology

Linear Technology 1029 Manuale utente

Linear Technology

Linear Technology DC937A Manuale utente

Linear Technology

Linear Technology DC2016A Guida rapida alla configurazione

Linear Technology

Linear Technology DC1780A-B Guida rapida alla configurazione

Linear Technology

Linear Technology DC1948A Guida rapida alla configurazione

Linear Technology

Linear Technology DC1428A Guida rapida alla configurazione

Linear Technology

Linear Technology DC1811B-A Guida rapida alla configurazione

Linear Technology

Linear Technology DC1160 Guida rapida alla configurazione

Linear Technology

Linear Technology DC1565A Guida rapida alla configurazione

Linear Technology

Linear Technology DC1733A Guida rapida alla configurazione

Linear Technology

Linear Technology LTC3554EPD Manuale utente

Linear Technology

Linear Technology DC1339 Manuale utente

Linear Technology

Linear Technology DC2072A Guida rapida alla configurazione

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente