Linksys SPA 2102 ATA Manuale utente

INSTALLATION GUIDE

Linksys SPA 2102 ATA Installation Guide

For analog phone or fax extensions

To congure and activate your Linksys SPA 2102 ATA, please have your phone system

administrator follow these steps:

Congure Extensions

To get started, check to see if your extension(s) need to be congured.

1. First go to the www.8x8.com website and Sign-In to My Account.

2. Enter Login and Password.

3. Click the Congure button(s) for each extension to be congured (i.e. 1014, 1015).

Note: If your extension says Activate in the blue box, it is already congured and you can go

directly to the Installing your Linskys ATA section on page 3.

For further assistance on

activating your Linksys

SPA 2102 ATA, contact

8x8 Customer Support on

1.888.898.8733

INSTALLATION GUIDE

Linksys SPA 2102 ATA

Congure Extension Settings

1. You can select the following features and information for the extension. Once done, click Next.

Note: You can always modify these settings later on.

2. You will need to verify or provide your E911 address, and then click Continue.

INSTALLATION GUIDE

Linksys SPA 2102 ATA

3. If no phone number has been selected, you can select a phone number for the extension. Then click Continue.

Installing your Linksys SPA 2102 ATA

Now that your extensions are congured, you can install and activate your device(s).

Follow the diagram below to connect your device using the ports on the back panel.

You will require either an analog phone or a fax machine with an analog phone to activate your device with 8x8 service using the

Phone 1 port.

PHONE 1 PHONE 2 ETHERNET INTERNET

DC 5V

Power

Fax Machine Computer or

Laptop

Internet Connection

(Router or

Broadband Modem)

Power AdapterAnalog Phone

or Fax Machine

• Use the PHONE 1 and PHONE 2 ports to connect an analog phone (or fax machine) with an RJ-11 telephone cable.

• The ETHERNET port connects to an individual network device, such as a PC or a Laptop.

• The INTERNET port connects to your router or if you have no router, direct to your cable or DSL Broadband Modem.

Note: If you connect directly to a broadband modem, you will rst need to congure your Linksys ATA to act as a router. Please

see the instructions in the Using your Linksys ATA as a Router section.

• The Power port is where you connect your AC power adapter.

INSTALLATION GUIDE

Linksys SPA 2102 ATA

Activating Your Device

Obtain the Activation Code for your Linksys 2102 ATA device. If this has not been communicated to you in an Equipment Shipped email from

8x8, or if you do not have access to this email, you can retrieve the activation codes from your 8x8 Self Service Portal.

Note: If you purchased a Second Port Fax Extension Plan for the Phone 2 port, further activation is not required.

Locating an Activation Code

Refer to the gure below for these steps:

a. Just log on to your Self Service Portal at myaccount.8x8.com and click on the Activate button of the extension that you

wish to activate.

b. A pop up screen will display the activation code for the extension.

c. Use the activation code and simply follow the steps below for activation.

Enter Your Activation Code

1. Make sure your Linksys 2102 ATA is connected to the Internet, and that a regular telephone or a fax machine with a telephone is attached

to the Phone 1 port.

NOTE: If you have a fax machine without a telephone handset, attach a regular telephone to the Phone 1 port and then replace it with the

fax machine after the phone port is activated.

2. Lift your handset as if you were answering your phone or making a call. You should hear a recorded message with instructions on how to

enter your activation code and activate your device.

NOTE: If you do not hear the recorded message, check all your wiring again, and if you are still having problems, call 8x8 Service

at: 1.888.898.8733 for assistance.

3. Enter the activation code that corresponds with the extension number you are activating, and press #.

4. After entering the code, you should hear the successful activation message.

5. Your device should restart in one minute or less. If it does not restart, please restart your device by disconnecting your power and

reconnecting power.

6. After restarting, the Phone 1 or Phone 2 indicator lights on the front panel should be solid green and you should be able to make phone

calls (place a sample call to verify) and if this is a phone port that you want to use for fax, you can now connect your fax after a test call

was successful.

INSTALLATION GUIDE

Linksys SPA 2102 ATA

Using your Linksys ATA as a Router

These instructions are only for use when you have no separate router, wireless router, or combination broadband

modem/router already in your network.

If you do not have a router, you can connect your Broadband modem directly into your Linksys ATA and then congure it to act as a router.

Please follow the instructions below to congure it:

Congure Linksys ATA

1. Determine the IP address of your Linksys.

a. Plug in an analog phone to the Phone 1 or Phone 2 port.

b. Dial **** and you will hear the Linksys Conguration Menu.

c. Dial 110# to obtain the IP address of your Linksys ATA.

2. Access the Linksys ATA web Interface to your Linksys ATA.

a. Open a browser window on your PC or laptop.

b. Enter the IP address into your browser.

c. This should open up the conguration window. If you can’t access the conguration window:

• Recheck your IP address

• If you have diculty, plug your PC or laptop directly into the Ethernet port of the ATA and type in the IP address.

• If you still have diculty, go back to the IVR and dial **** from the phone connected to your ATA, then dial 7932# and then dial 1

to turn on the web interface.

INSTALLATION GUIDE

Linksys SPA 2102 ATA

3. Select the Advanced link, and in the advanced screen, select the LAN Setup tab. Select NAT from the Networking Service pull down menu

to enter the ROUTER mode.

4. Your ATA Internet port can be connected directly to a broadband modem and the Linksys SPA 2102 can be used as an ATA for your phone,

and as a router for your PC or laptop when plugged directly into the Ethernet port of the ATA.

a. To return to the original settings, so your ATA device can be used with a router (rather than connected directly to a broadband modem),

select Bridge from the Networking Service pull down menu.

If you need detailed instructions on connecting your Linksys ATA as a router to your Internet Service Provider, please refer to the Linksys

SPA2102 Router Conguration Guide at: http://www.8x8.com/Support/BusinessSupport/Documentation.aspx

INSTALLATION GUIDE

Linksys SPA 2102 ATA

P: 888.898.8733 (Toll-Free)

P: 408.687.4120 (Outside US)

F: 408.980.0432

NASDAQ: EGHT

www.8x8.com

Reference Section: Indicator Lights

The status of your adapter can be determined by looking at the indicator lights on the front panel.

Power Green. The Power LED lights up when the phone adapter is powered on and connected to the Internet. It ashes when

the Phone Adapter is not connected to the Internet. The LED also ashes when the phone adapter is booting up or

upgrading its rmware.

INTERNET Green. The INTERNET LED lights up when there is an active connection through the port. If the LED is ashing, then there

is trac moving through that port.

PHONE 1 or

PHONE 2

Green. The PHONE LED (PHONE 1 or PHONE 2) is solidly lit when a telephone or fax has an active or registered connection

to your Internet Service Provider (ISP) through the corresponding port. It ashes when the phone is being used or is o

hook.

Making a Call for the First Time

To dial outside, dial the number:

• Long Distance (1-555-555-5555)

• Local Calls (555-5555 or 1-555-555-5555)

To dial internally, dial the extension number:

• 1001 (Extension)

• 555 (Voicemail)

• 444 (Auto Attendant)

Indice

Altri manuali Linksys Adattatore

Linksys

Linksys WPC4400N Manuale utente

Linksys

Linksys WPC54GR (DE) Istruzioni per l’uso

Linksys

Linksys SPA3102 Manuale utente

Linksys

Linksys PLTE200 Manuale utente

Linksys

Linksys USB1000 Istruzioni operative originali

Linksys

Linksys WUSB6300 V2 Manuale del proprietario

Linksys

Linksys WGA54AG Istruzioni operative originali

Linksys

Linksys PAP2 Manuale utente

Linksys

Linksys WMP11 ver. 2.7 Istruzioni operative originali

Linksys

Linksys WUSB11 ver. 2.6 Manuale utente

Linksys

Linksys WPC54GS - Refurb Wrls-g Notebook Adr Spdbstr No... Manuale operativo

Linksys

Linksys Linksys SPA9000 Manuale operativo

Linksys

Linksys WPC11 Istruzioni operative originali

Linksys

Linksys PLE200 - PowerLine AV EN Adapter Bridge Manuale utente

Linksys

Linksys WUSB54G Manuale operativo

Linksys

Linksys Small Business SPA2102 Istruzioni operative originali

Linksys

Linksys PLE200 - PowerLine AV EN Adapter Bridge Manuale utente

Linksys

Linksys WGA11B Manuale utente

Linksys

Linksys LNE100M Istruzioni operative originali

Linksys

Linksys PLE200 - PowerLine AV EN Adapter Bridge Istruzioni operative originali

Linksys

Linksys WMA11B - Wireless-B Media Adapter Istruzioni operative originali

Linksys

Linksys WPC54G EU Manuale utente

Linksys

Linksys USBBT100 Manuale utente

Linksys

Linksys 487023U Manuale utente

Manuali Adattatore popolari di altre marche

PCB Piezotronics

PCB Piezotronics 090B274 Manuale utente

Auvidea

Auvidea J20 Manuale del prodotto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuale utente

Akribis

Akribis ITF-21-BISS-MIT Manuale utente

Tenda

Tenda W54U Manuale utente

ROHO

ROHO AGILITY Manuale utente

PROLiNK

PROLiNK WN2001 Manuale utente

Hawking

Hawking HUF2 Manuale utente

Airlink101

Airlink101 AWLC4030 Manuale utente

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuale utente

Philips

Philips SWA4554S/10 Manuale utente

JVC

JVC TS-C9D2B Manuale di istruzioni

NETGEAR

NETGEAR A6100 Manuale utente

D-Link

D-Link DWA-121 Manuale utente

Philips

Philips SWA2037 Manuale utente

Basalte

Basalte 0610-20 Manuale utente

Yealink

Yealink EHS40 Manuale utente

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuale utente