Linksys SRW2016 Manuale utente
A Division of Cisco Systems, Inc.
®
Model No.
WIRED with WebView
16, 24, or 48-Port 10/100/1000 Gigabit Ethernet Switch
SRW2016/SRW2024/SRW2048/SRW224G4/SRW248G4
User Guide
24 or 48-Port 10/100 Fast Ethernet Switch
WebView Switches
Copyright and Trademarks
Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco
Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2005 Cisco Systems, Inc. All
rights reserved. Other brands and product names are trademarks or registered trademarks of their respective
holders.
How to Use this User Guide
The User Guide to the WebView Switches has been designed to make understanding networking with the switch
easier than ever. Look for the following items when reading this User Guide:
In addition to these symbols, there are definitions for technical terms that are presented like this:
Also, each figure (diagram, screenshot, or other image) is provided with a figure number and description, like
this:
Figure numbers and descriptions can also be found in the “List of Figures” section.
This exclamation point means there is a caution or
warning and is something that could damage your
property or the Switch.
word: definition.
This checkmark means there is a note of interest and
is something you should pay special attention to while
using the Switch.
This question mark provides you with a reminder about
something you might need to do while using the Switch.
Figure 0-1: Sample Figure Description
Webview Switches-UG-50817 KL
WARNING: This product contains chemicals, including lead, known
to the State of California to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
WebView Switches
Table of Contents
Chapter 1: Introduction 1
Welcome 1
What’s in this User Guide? 2
Chapter 2: Getting to Know the Switch 3
Overview 3
The Front Panel 3
The Back Panel 4
Chapter 3: Connecting the Switch 5
Overview 5
Before You Install the Switch... 6
Placement Options 6
Connecting the Switch 7
Chapter 4: Using the Console Interface for Configuration 9
Overview 9
Configuring the HyperTerminal Application 9
Connecting to the Switch through a Telnet Session 10
Configuring the Switch through the Console Interface 11
Chapter 5: Using the Web-based Utility for Configuration 20
Overview 20
Accessing the Web-based Utility 20
Sys. Info. (System Information) Tab - System Description 21
Sys. Info. (System Information) Tab - System Mode 21
Sys. Info. (System Information) Tab - Forwarding Database 22
Sys. Info. (System Information) Tab - Time Synchronization 23
IP Conf. (Configuration) Tab - IP Addr. (Address) 24
Switch Conf. (Configuration) Tab - Interface Conf. (Configuration) 25
Switch Conf. (Configuration) Tab - VLAN 28
Switch Conf. (Configuration) Tab - VLAN Interface Settings 29
Switch Conf. (Configuration) Tab - GVRP Parameters 30
Switch Conf. (Configuration) Tab - LAG Conf. (Configuration) 31
Switch Conf. (Configuration) Tab - Port Mirroring 32
Switch Conf. (Configuration) Tab - LACP 33
WebView Switches
Switch Conf. (Configuration) Tab - IGMP Snooping 34
Switch Conf. (Configuration) Tab - Bridge Multicast 35
Switch Conf. (Configuration) Tab - Bridge Multicast Forward All 36
QoS Tab - CoS Settings 37
QoS Tab - Queue Settings 38
QoS Tab - CoS to Queue 38
QoS Tab - Bandwidth 39
Security Tab - Local Users/System Password 40
Security Tab - 802.1x Users 40
Security Tab - 802.1x Port Conf. (Configuration) 41
Security Tab - RADIUS Server 43
Security Tab - Storm Control 45
Security Tab - Authenticated Users 45
Security Tab for SRW2048 Switches - ACL 46
Security Tab for SRW2048 Switches - Profile Rules 47
Security Tab for Other Switches - ACL 51
Security Tab for Other Switches - MAC Based ACL 52
Security Tab for Other Switches - ACL Mapping 53
SNTP Tab - Global Settings 54
SNTP Tab - Authentication 55
SNTP Tab - Servers 56
SNTP Tab - Interface Settings 57
Statistics Tab - Interface Statistics 58
Statistics Tab - Etherlike Statistics 59
Statistics Tab - RMON Statistics 60
Statistics Tab - RMON History Control 62
Statistics Tab - RMON History Log 63
Statistics Tab - RMON Alarms 64
Statistics Tab - RMON Events Control 66
Statistics Tab - RMON Events Log 67
Statistics Tab - EAP Statistics 68
Statistics Tab - GVRP Statistics 69
Logs Tab - Message Log 70
Logs Tab - Event Log 70
Logs Tab - Global Parameters 71
SNMP Tab 72
WebView Switches
Maintenance Tab - Telnet 82
Maintenance Tab - Reset 82
Maintenance Tab - File Download 82
Maintenance Tab - File Upload 83
Maintenance Tab - Restore Defaults 84
Maintenance Tab - Integrated Cable Test 84
Maintenance Tab - HTTP File Download 85
Spanning Tree Tab - Global Settings 86
Spanning Tree Tab - STP Interface Settings 88
Spanning Tree Tab on SRW2048 Switches - RSTP Interface Settings 90
Spanning Tree Tab on SRW2048 Switches - MSTP Properties 92
Spanning Tree Tab on SRW2048 Switches - MSTP Instance Settings 93
Spanning Tree Tab on SRW2048 Switches - MSTP Interface Settings 94
Help Tab 95
Appendix A: About Gigabit Ethernet and Fiber Optic Cabling 96
Gigabit Ethernet 96
Fiber Optic Cabling 96
Appendix B: Windows Help 97
Appendix C: Glossary 98
Appendix D: Specifications 103
Appendix E: Warranty Information 105
Appendix F: Regulatory Information 106
Appendix G: Contact Information 107
WebView Switches
List of Figures
Figure 2-1: Front Panel of the 16-Port Switch 3
Figure 2-2: Back Panel of the 16-Port Switch 4
Figure 3-1: Typical Network Configuration for the 16-Port Switch 5
Figure 3-2: Attach the Brackets to the Switch 7
Figure 3-3: Mount the Switch in the Rack 7
Figure 4-1: Finding HyperTerminal 9
Figure 4-2: Connection Description 9
Figure 4-3: Connect To 9
Figure 4-4: COM1 Properties 10
Figure 4-5: Telnet Login screen 10
Figure 4-6: Switch Main Menu 11
Figure 4-7: Port Status 11
Figure 4-8: Port Configuration 12
Figure 4-9: System Configuration Menu 12
Figure 4-10: System Information Menu 13
Figure 4-11: Versions 13
Figure 4-12: General System Information 13
Figure 4-13: Management Settings Menu 14
Figure 4-14: Serial Port Configuration 14
Figure 4-15: Telnet Configuration 14
Figure 4-16: Username & Password Settings 15
Figure 4-17: Security Settings 15
Figure 4-18: SSL Certificate Generation 16
Figure 4-19: SSL Certificate 16
Figure 4-20: IP Configuration 16
Figure 4-21: IP Address Configuration 17
Figure 4-22: HTTP 17
Figure 4-23: HTTPS Configuration 17
WebView Switches
Figure 4-24: Network Configuration 18
Figure 4-25: Ping Test 18
Figure 4-26: TraceRoute Test 18
Figure 4-27: File Management 19
Figure 4-28: Restore System Default Settings 19
Figure 4-29: Reboot System 19
Figure 5-1: Login Screen 20
Figure 5-2: System Information - System Description 21
Figure 5-3: System Information - System Mode 21
Figure 5-4: System Information - Forwarding Database 22
Figure 5-5: Forwarding Database - Add Entry 22
Figure 5-6: System Information - Time Synchronization 23
Figure 5-7: IP Configuration - IP Address 24
Figure 5-8: Switch Configuration - Interface Configuration 25
Figure 5-9: Interface Configuration - Change Settings 26
Figure 5-10: Switch Configuration - VLAN 28
Figure 5-11: Switch Configuration - Create VLAN 28
Figure 5-12: Switch Configuration - VLAN Interface Settings 29
Figure 5-13: Switch Configuration - edit VLAN Interface Settings 29
Figure 5-14: Switch Configuration - GVRP Parameters 30
Figure 5-15: Switch Configuration - PVE Mapping 30
Figure 5-16: Switch Configuration - LAG Configuration 31
Figure 5-17: Switch Configuration - edit LAG Configuration 31
Figure 5-18: Switch Configuration - Port Mirroring 32
Figure 5-19: Switch Configuration - LACP 33
Figure 5-20: LACP - Change Settings 33
Figure 5-21: Switch Configuration - IGMP Snooping 34
Figure 5-22: Switch Configuration - Edit IGMP Snooping 34
Figure 5-23: Switch Configuration - Bridge Multicast 35
Figure 5-24: Switch Configuration - Edit Bridge Multicast 35
WebView Switches
Figure 5-25: Switch Configuration - Bridge Multicast Forward All 36
Figure 5-26: QoS - CoS Settings 37
Figure 5-27: QoS - Queue Settings 38
Figure 5-28: QoS - CoS to Queue 38
Figure 5-29: QoS - Bandwidth 39
Figure 5-30: QoS - Edit Bandwidth 39
Figure 5-31: Security - Local Users/System Password 40
Figure 5-32: Security - Edit Local Users/System Password 40
Figure 5-33: Security - 802.1x Users 40
Figure 5-34: Security - 802.1x Port Configuration 41
Figure 5-35: 802.1x Port Configuration - Change Settings 42
Figure 5-36: Security - RADIUS Server 43
Figure 5-37: Security - Add RADIUS Servers 43
Figure 5-38: Security - Storm Control 45
Figure 5-39: Security - Authenticated Users 45
Figure 5-40: SRW2048 Switch Security - ACL 46
Figure 5-41: SRW2048 Switch Security - create ACL profile 46
Figure 5-42: SRW2048 Switch Security - Profile Rules 47
Figure 5-43: SRW2048 Switch Security - Authentication Profiles 48
Figure 5-44: SRW2048 Switch Security - Authentication Mapping 49
Figure 5-45: SRW2048 Switch Security - TACACS+ 50
Figure 5-46: Fast Ethernet Security - ACL 51
Figure 5-47: Fast Ethernet Security - create ACL Profile 51
Figure 5-48: Fast Ethernet Security - MAC Based ACL 52
Figure 5-49: Fast Ethernet Security - ACL Mapping 53
Figure 5-50: SNTP - Global Settings 54
Figure 5-51: SNTP - Authentication 55
Figure 5-52: SNTP - Servers 56
Figure 5-53: SNTP - Interface Settings 57
Figure 5-54: Statistics - Interface Statistics 58
WebView Switches
Figure 5-55: Statistics - Etherlike Statistics 59
Figure 5-56: Statistics - RMON Statistics 60
Figure 5-57: Statistics - RMON History Control 62
Figure 5-58: Statistics - RMON History Log 63
Figure 5-59: Statistics - RMON Alarms 64
Figure 5-60: Statistics - add RMON Alarm entry 65
Figure 5-61: Statistics - RMON Events Control 66
Figure 5-62: Statistics - RMON Events Log 67
Figure 5-63: Statistics - EAP Statistics 68
Figure 5-64: Statistics - GVRP Statistics 69
Figure 5-65: Logs - Message Log 70
Figure 5-66: Logs - Event Log 70
Figure 5-67: Logs - Global Parameters 71
Figure 5-68: SNMP - Global Parameters 73
Figure 5-69: SNMP - Views 74
Figure 5-70: SNMP - Group Profile 75
Figure 5-71: SNMP - add Group Profile 76
Figure 5-72: SNMP - Group Membership 77
Figure 5-73: SNMP - add Group Membership 78
Figure 5-74: SNMP - Communities 78
Figure 5-75: SNMP - Properties 79
Figure 5-76: SNMP - Notification Filter 80
Figure 5-77: SNMP - Notification Receiver 81
Figure 5-78: Maintenance - Telnet 82
Figure 5-79: Maintenance - Reset 82
Figure 5-80: Maintenance - File Download 82
Figure 5-81: Maintenance - File Upload 83
Figure 5-82: Maintenance - Restore Defaults 84
Figure 5-83: Maintenance - Integrated Cable Test 84
Figure 5-84: Integrated Cable Test - Perform Test 85
WebView Switches
Figure 5-85: Maintenance - HTTP File Download 85
Figure 5-86: Spanning Tree - Global Settings 86
Figure 5-87: Spanning Tree - STP Interface Settings 88
Figure 5-88: Spanning Tree - RSTP Interface Settings 90
Figure 5-89: Spanning Tree - MSTP Properties 92
Figure 5-90: Spanning Tree - MSTP Instance Settings 93
Figure 5-91: Spanning Tree - MSTP Interface Settings 94
Altri manuali per SRW2016
4
Questo manuale è adatto per i seguenti modelli
4
Indice
Altri manuali Linksys Interruttore
Linksys
Linksys BEFN2PE Manuale utente
Linksys
Linksys SRW248G4 Manuale operativo
Linksys
Linksys SE3008 Manuale utente
Linksys
Linksys SRW2008P Manuale operativo
Linksys
Linksys SRW208 Manuale utente
Linksys
Linksys SLM224G2 Manuale utente
Linksys
Linksys SRW208L Manuale operativo
Linksys
Linksys SE4008 Manuale utente
Linksys
Linksys DSSXFXSC Manuale utente
Linksys
Linksys SFE2000 Manuale utente
Linksys
Linksys ProConnect Series Manuale utente
Linksys
Linksys USB2HUB4 - ProConnect USB Hub Manuale utente
Linksys
Linksys EG24M - EtherFast II Switch Manuale utente
Linksys
Linksys SD2005 Manuale utente
Linksys
Linksys SRW224P - 10/100 - Gigabit Switch Manuale utente
Linksys
Linksys SR216 Manuale utente
Linksys
Linksys SRW224P - 10/100 - Gigabit Switch Manuale utente
Linksys
Linksys SE4008 Manuale utente
Linksys
Linksys Etherfast EF1704 Manuale utente
Linksys
Linksys SRW208 Manuale utente
