9
NFC Function
Turn on NFC on your Bluetooth device (If your device has NFC functionality), place your device to the
NFC area (on the top of the speakers next to the MIC port or power indicator) of the speakers, the two
devices will be connected by Bluetooth to each other. Repeat this for disconnecting.
Listening to the speakers
Long press the Power button to turn on / off the speakers. After turning on the speakers short press the
Mbutton. This will switch between AUX and Bluetooth modes.
While playing music on AUX or Bluetooth mode you can plug in headphones into the earphone jack.
Bluetooth Mode
On the status of the Bluetooth connection you may only switch to AUX mode by pressing the M
button once your Bluetooth device is paused. At this time, Bluetooth is still connected and has
priority. When you replay the music via Bluetooth, the audio from AUX mode automatically
stops. When the Bluetooth device is paused, AUX mode automatically opens after 3 seconds.
Short press PREV / NEXT for previous & next song
Short press V+ / V- to increase or decrease the volume
a. Note: Volume can be adjusted separately on all the modes including Bluetooth, AUX and
phone calls
During playing music on Bluetooth mode, if there is an incoming call, the Bluetooth music
automatically stops to enter into Call mode. Short press the Phone button to answer, long press
to reject / end the call. When talking, short press Phone button to switch over if another call is
coming; long press to end the call.
a. While in Bluetooth mode, press and hold the Phone button for 3 seconds to enter into
iPhone Siri or Android Voice Dial; Press twice to redial the latest call.
AUX Mode
Press Mbutton to select AUX mode.
oShort press V+ / V- for volume up and down.
Two or more speakers
Two or more speakers can work at the same time via a 3.5mm audio cable (i.e. Box-A and Box-
B).
When playing the music via Box-A keep one end of a 3.5mm audio cable plug into the earphone
jack of Box-A, and the other end into Box-B’s AUX jack. (Ensure Box-B is on AUX mode).
