Lovibond MD 100 Manuale utente

Lovibond®Water Testing

Tintometer®Group

Manual of Methods

MD 100 • MD 110 • MD 200

Manual of Methods

Page 4

Methodenhandbuch

Seite 48

Manual de Metodos

Página 94

Methodes Manuel

Page 140

Manuale dei Metodi

Pagina 186

Metodos Manual

Página 232

Handboek Methoden

Zijde 278

方法手册

Page 322

NL Handboek van Methoden 01/20EN Handbook of Methods 01/20

KS4.3 T

0.1 - 4 mmol/l KS4.3

Acid / Indicator

S:4.3

Instrument specific information

The test can be performed on the following devices. In addition, the required cuvette

and the absorption range of the photometer are indicated.

Instrument Type Cuvette λMeasuring Range

MD 200, MD 600, MD 610,

MD 640, MultiDirect, PM 620,

PM 630

ø 24 mm 610 nm 0.1 - 4 mmol/l KS4.3

SpectroDirect, XD 7000,

XD 7500

ø 24 mm 615 nm 0.1 - 4 mmol/l KS4.3

Material

Required material (partly optional):

Reagents Packaging Unit Part Number

Alka-M-Photometer Tablet / 100 513210BT

Alka-M-Photometer Tablet / 250 513211BT

Application List

• Waste Water Treatment

• Drinking Water Treatment

• Raw Water Treatment

Notes

1. The terms Alkalinity-m, m-Value, total alkalinity and Acid demand to KS4.3 are iden-

tical.

2. For accurate results, exactly 10 ml of water sample must be used for the test.

Display in the MD

100 / MD 110 /

MD 200

Bar code for the

detection of the

methods

Method name

Measuring range

Chemical Method

Method number

Language codes

ISO 639-1 Revision status

KS4.3 T / 20

How to use

ENHandbook of Methods4

Implementation of the provision Acid capacity KS4.3 with Tablet

Select the method on the device

For this method, no ZERO measurements are to be carried out with the following de-

vices: XD 7000, XD 7500

10 ml

Fill 24 mm vial with 10 ml

sample.

Close vial(s).

Sample

Place sample vial in the

sample chamber. • Pay

attention to the positioning.

Dissolve tablet(s) by inver-

ting.

Sample

Place sample vial in the

sample chamber. • Pay

attention to the positioning.

Test

Press the TEST (XD:

START)button.

The result in Acid Capacity KS4.3 appears on the display.

Performing test

procedure

KS4.3 T / 20

NL Handboek van Methoden 01/20EN Handbook of Methods 01/20

How to use

ENHandbook of Methods 5

Alkalinity-m T / M30

ENMethod Reference Book1.06

Alkalinity-m T M30

5 - 200 mg/l CaCO3tA

Acid / Indicator

Notes

1. The terms Alkalinity-m, m-Value, total alkalinity and Acid demand to KS4.3 are identical.

2. For accurate results, exactly 10 ml of water sample must be used for the test.

Alkalinity-m T / M30

ENMethod Reference Book1.0 7

Implementation of the provision Alkalinity, total = Alkalinity-m =

m-Value with Tablet

Select the method on the device

10 ml

Sample

Fill 24 mm vial with 10 ml

sample.

Close vial(s). Place sample vial in the

sample chamber. • Pay

attention to the positioning.

Zero

Press the ZERO button. Remove the vial from the

sample chamber.

24 mm

Add ALKA-M-

PHOTOMETER tablet.

Crush tablet(s) by rotating

slightly.

Close vial(s).

Alkalinity-m T / M30

ENMethod Reference Book1.08

Sample

Test

Dissolve tablet(s) by

inverting.

Place sample vial in the

sample chamber. • Pay

attention to the positioning.

Press the TEST (XD:

START)button.

The result in Alkalinity-m appears on the display.

Alkalinity-m T / M30

ENMethod Reference Book1.0 9

Analyses

The following table identifies the output values can be converted into other citation

forms.

Unit Cite form Scale Factor

mg/l CaCO31

°dH 0.056

°eH 0.07

°fH 0.1

°aH 0.058

KS4.3

Chemical Method

Acid / Indicator

Appendix

Derived from

EN ISO 9963-1

Bromine T / M80

ENMethod Reference Book1.010

Bromine T M80

0.05 - 13 mg/l Br2Br

DPD

Preperation

1. Cleaning of vials:

As many household cleaners (e.g. dishwasher detergent) contain reducing

substances, the subsequent determination of oxidising agents (e.g. ozone and

chlorine) may show lower results. To avoid measurement errors, the glassware

used should be free of chlorine consumption. To achieve this, all glassware should

be placed in a sodium hypochlorite solution (0.1 g/l) for one hour and then rinsed

thoroughly with deionised water.

2. When preparing the sample, Bromine outgassing, e.g. through the pipette or shaking,

must be avoided. The analysis must take place immediately after taking the sample.

3. Strong alkaline or acidic water samples must be adjusted between pH 6 and pH 7

before the analysis (use 0.5 mol/l Sulphuric acid or 1 mol/l Sodium hydroxide).

Bromine T / M80

ENMethod Reference Book1.0 11

Implementation of the provision Bromine with Tablet

Select the method on the device

10 ml

Sample

Fill 24 mm vial with 10 ml

sample.

Close vial(s). Place sample vial in the

sample chamber. • Pay

attention to the positioning.

Zero

Press the ZERO button. Remove the vial from the

sample chamber.

Empty vial except for a few

drops.

24 mm

Add DPD No. 1 tablet . Crush tablet(s) by rotating

slightly.

Fill up vial with sample to

the 10 ml mark.

Altri manuali per MD 100

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali Lovibond Strumento di misura

Lovibond

Lovibond Fx Istruzioni per il montaggio

Lovibond

Lovibond Scuba II Manuale utente

Lovibond

Lovibond SensoDirect pH200 Manuale utente

Lovibond

Lovibond TR 515 Istruzioni per il montaggio

Lovibond

Lovibond MD200 Manuale utente

Lovibond

Lovibond SD 300 pH Manuale utente

Lovibond

Lovibond SD 50 pH Manuale utente

Lovibond

Lovibond Tintometer MD100 Manuale utente

Lovibond

Lovibond TG 60/268 Istruzioni per il montaggio

Lovibond

Lovibond MicroDirect pH10 Manuale utente

Lovibond

Lovibond Scuba II Manuale utente

Lovibond

Lovibond Photometer-System MD100 Manuale utente

Lovibond

Lovibond SWIMTEC MD100 Manuale utente

Lovibond

Lovibond MD 610 Manuale utente

Lovibond

Lovibond SensoDirect pH110 Manuale utente

Lovibond

Lovibond SD 400 Oxi L Manuale utente

Lovibond

Lovibond MD200 Manuale utente

Lovibond

Lovibond Photometer-System MD100 Manuale utente

Lovibond

Lovibond CheckitDirect Manuale utente

Lovibond

Lovibond TB300 IR Manuale utente

Lovibond

Lovibond Photometer-System MD100 Manuale utente

Lovibond

Lovibond SD 60 REDOX Manuale utente

Lovibond

Lovibond Tintometer SensoDirect Salt110 Manuale utente

Lovibond

Lovibond SensoDirect Oxi200 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente