Lutron Electronics PPS-9312 Manuale utente

PRESSURE

CONTROLLER/MONITOR

Model : PPS-9312

our purchase of this PRESSURE

CONTROLLER/MONITOR marks a step forward for you

into the field of precision measurement. Although this

PRESSURE controller is a complex and delicate instrument,

its durable structure developed. Please read the following

instructions carefully and always keep this manual within

easy reach.

OPERATION MANUAL

Caution Symbol

Caution :

* Risk of electric shock !

Caution :

* Do not use fingers or any tool

to touch the Wire Terminals.

* Do not apply the relay contact load

current > 0.5 Amp.

* The instrument contains no user

serviceable parts and should not

be opened by the user.

* Repair or after service should be

done by a qualified technician only.

* Power supply should apply the

correct ACV power voltage

* Cleaning - Only use the dry cloth to

clean the plastic case !

* Equipment protected throughout

by Double Insulation or Reinforced

Insulation.

Environmental Condition

* Comply with EN61010.

Transient over voltage at Mains Supply 2500V.

* Pollution Degree 2.

* Altitude up to 2000 meters.

* Indoor use.

* Relative humidity 80% max.

TABLE OF CONTENTS

1.FEATURES..................................................................1

2.SPECIFICATIONS........................................................ 2

3.FRONT PANEL DESCRIPTION.......................................5

3-1 Display................................................................. 5

3-2 PV ( process value ) indicator.................................5

3-3 SV ( set value ) indicator.......................................

3-4 Set Button............................................................ 5

3-5 Button.............................................................

▼5

3-6 Button.............................................................▲5

3-7 Control relay indicator........................................... 5

3-8 Alarm relay indicator............................................ 5

3-9 X10 indicator........................................................ 5

3-10 X100 indicator................................................... 5

3-11 Wire terminals.................................................... 5

3-12 Case holder ....................................................... 5

3-13 RS232 terminal................................................... 5

4.MEASURING PROCEDURE............................................6

4-1 Terminal connection..............................................6

4-2 Pressure measurement..........................................6

4-3 1st layer setting procedures...................................7

4-4 2nd layer setting procedures..................................9

5. RS232 PC SERIAL INTERFACE.....................................

6. SYSTEM RESET..........................................................

7. OPTIONAL PRESSURE SENSORS

( Optional 2 wires pressure transmitters ) ....................16

8.THE ADDRESS OF AFTER SERVICE CENTER..................17

1. FEATURES

* Meter connects with 2, 5, 10, 20, 50, 100, 200, 400 bar

sensor, no calibration procedures are necessary typically

when change a new sensor .

* Unit select : Bar, PSI, Kg/cm^2, inch Hg, mm Hg,

inch H2O, meter H2O, Atmosphere, hPa, KPa.

* Large red LED display, high brightness and easy to read.

* Control setting, Hi/Lo alarm setting.

* Control relay output, alarm relay output.

* Alarm Relay will make action when the reading value

reach to high/low alarm value.

* Control Relay will make action when the reading value

reach to control value.

* Hysteresis value setting for control and alarm function.

* Microprocessor circuit ensures high accuracy and

provides special functions and features.

* Power : 90 ACV to 260 ACV, 50/60 Hz.

* Cooperate the 4-20 mA pressure input, sensor can

install in the faraway position.

* DC 24V output, used for the power of pressure sensor.

* RS-232/USB computer interface.

* DIN size : 96 x 48 mm. Depth : 110 mm.

* Optional pressure sensor, TR-PS2W-xxBAR, PS93MA-xxBAR.

* Optional USB cable, USB-01.

* Optional data acquisition software.

* Optional GSM controller.

2. SPECIFICATIONS

2-1 General Specifications

Display 4 digits red LED, digit size : 14 mm.

x 10, x100 indicator

Circuit Custom chip of microprocessor LSI

circuit.

Sensor type Can cooperate with optional 2, 5, 10, 20,

50, 100, 200, 400 bar two wires 4 to 20

mA pressure sensor, new calibration are

not necessary typically when change the

new sensor .

* Sensor type can make the internal

setting with default

Display units Bar, Psi, Kg/cm^2, mm Hg, inch Hg,

meter H2O, inch H2O, Atmosphere,

hPa, KPa.

* Unit can make the internal setting with

default

Accuracy ± ( 0.5% + 2 d )

* Meter only.

* Within 23 ± 5℃℃

Pressure Cooperate the optional two wires ( or

sensor four wires ) 4 to 20 mA pressure

* optional

sensors ( transmitters ).

* two wires sensor : TR-PS2W-xxBAR

* Four wires sensor : PS93MA-xxBAR

Offset adjust It can make the internal Offset setting

with default.

Gain adjust It can make the internal Gain setting

with default

Input signal

* Input 4 mA = 0 pressure

from sensor

* Input 20 mA = full scale pressure

Sampling Time Approx. 1 second.

Relay Output Number 2 relays

Function

Relay 1 :

Control relay.

Relay 2 :

High/Low alarm relay.

Max load 0.5 ACA/250 ACV

0.5 DCA/24 DCV

Do not apply the rela

contact load current

> 0.5 A, otherwise th

relay may be dama

permanently without

warranty.

Setting

1st layer

CtLo ( Control low limit )

Function

setting

CtHi ( Control high limit )

procedures

ALLo ( Alarm low limit )

ALHi ( Alarm high limit )

Second layer

tyPE ( Sensor type )

setting

FiLt ( Digital filter )

procedures

CtHy ( Control hysteresis set )

ALHy ( Alarm hysteresis set )

oFSt ( Offset adjustment )

GAin ( Gain adjustment )

Unit ( Unit set )

External DC 24 V, 50 mA max.

Power Supply

Data Output RS 232 PC serial interface.

Operating 0 to 50 .℃

Temperature

Operating Less than 80% R.H.

Humidity

Power Supply 90 to 260 ACV, 50/60 Hz.

Power Approx. 7.3 VA/AC 110V.

Consumption Approx. 11 VA/AC 220V.

Weight 258 g/0.57 LB.

Dimension DIN size : 96 x 48 mm.

Depth : 110 mm.

Accessories Instruction manual....................... 1 PC

Included Case holder with screw.................2 PCs

Optional Two wires pressure transmitters,

Accessories Model : TR-PS2W-xx BAR

* Range : 2, 5, 10, 20, 50, 100

400 BAR.

* Data Acquisition software,

SW-U801-WIN.

* RS232 cable, UPCB-02.

* USB cable, USB-01.

* Real time SD card datalogger

DL-9602SD

* GSM controller, GSM-889.

* Interface cable ( cable between meter

to GSM-889 ), GMCB-89.

3. FRONT PANEL DESCRIPTION

Fig. 1

3-1 Display

3-2 PV ( process value ) indicator

3-3 SV ( set value ) indicator

3-4 Set Button

3-5 Button▼

3-6 Button▲

3-7 Control relay indicator

3-8 Alarm relay indicator

3-9 X10 indicator

3-10 X100 indicator

3-11 Wire terminals

3-12 Case holder

3-13 RS232 terminal

4. MEASURING PROCEDURE

4-1 Terminal connection

1)Input the ACV power ( 90 to 260 ACV ) to T1, T2.

Do not input the

over voltage to the

AC input terminals.

2)Connect the " Control Relay " output from T3, T4.

Connect the " Alarm Relay " output from T5, T6.

4-2 Pressure measurement

1)Prepare the optional two wires pressure sensors

( transmitters ), TR-PS2W-xxBAR.

the optional four wires pressure sensors ( transmitters ),

PS93MA--xxBAR.

2)Make the wires installation as following :

3)Select the sensor type, please refer Chapter 4-2, page 10.

Select the sensor unit, please refer Chapter 4-2, page 14.

4-3 1st layer setting procedures

CtLo Control low value setting

CtHi Control high value setting

ALLo Alarm low value setting

ALHi Alarm high value setting

Indice

Altri manuali Lutron Electronics Unità di controllo

Lutron Electronics

Lutron Electronics Grafik Eye GRX-4000 Series Istruzioni per il montaggio

Lutron Electronics

Lutron Electronics QS Timeclock Manuale del proprietario

Lutron Electronics

Lutron Electronics Maestro Wireless MRF2-3PD-1 Manuale utente

Lutron Electronics

Lutron Electronics GRAFIK Eye QSGRJ-3P Istruzioni operative

Lutron Electronics

Lutron Electronics Vive DFCSJ-OEM-OCC Manuale utente

Lutron Electronics

Lutron Electronics QSGRK-6D Manuale del proprietario

Lutron Electronics

Lutron Electronics PowPak RMJS-CCO1-24-B Manuale utente

Lutron Electronics

Lutron Electronics RadioRA RAMC-5W Manuale utente

Lutron Electronics

Lutron Electronics PowPak FC-SENSOR Manuale utente

Lutron Electronics

Lutron Electronics Maestro Wireless Pico Series Manuale utente

Lutron Electronics

Lutron Electronics GRAFIK 6000 Manuale utente

Lutron Electronics

Lutron Electronics GRAFIK Eye QSGRJ-3P Istruzioni operative

Lutron Electronics

Lutron Electronics TriPak Series Manuale utente

Lutron Electronics

Lutron Electronics AuroRA ARMC-5T Manuale per l'uso e la cura

Lutron Electronics

Lutron Electronics GRAFIK Eye QS Manuale del proprietario

Lutron Electronics

Lutron Electronics LMM-16R-DV-B Manuale utente

Lutron Electronics

Lutron Electronics QS Timeclock Istruzioni operative

Lutron Electronics

Lutron Electronics PowPak RMJS-16R-DV-B Manuale utente

Lutron Electronics

Lutron Electronics Stanza SZ-2B Manuale utente

Lutron Electronics

Lutron Electronics PowPak Energi TriPak Series Manuale utente

Lutron Electronics

Lutron Electronics GRAFIK Eye QSGRJ-8E Istruzioni per l'installazione e il funzionamento

Lutron Electronics

Lutron Electronics LCP128 Manuale operativo

Lutron Electronics

Lutron Electronics Energi Savr Node Manuale utente

Lutron Electronics

Lutron Electronics PowPak RMJ-CCO1-24-B Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente