Lutron Electronics CD-4317SD Manuale utente
SD card real time data logger
TDS ( Total dissolved solids ), Salt
CONDUCTIVITY METER
Model : CD-4317SD
Your purchase of this
CONDUCTIVITY METE
R
with SD CARD
DATA LOGGER marks a
step forward for you
into the field of
precision measurement.
Althou
g
h this meter a
complex and delicate
instrument, its durable
structure will allow
many years of use if
proper operatin
g
techniques are
developed. Please read
the followin
g
instructions carefully
and always keep this
manual within easy
reach.
OPERATION MANUAL
TABLE OF CONTENTS
1. FEATURES................................................................ 1
2. SPECIFICATIONS......................................................
.
2
2-1 General Specifications.......................................... 2
2-2 Electrical Specifications........................................
.
4
3. FRONT PANEL DESCRIPTION.....................................6
4. MODE SELECTION.....................................................8
5. CONDUCTIVITY/TDS MEASURING and
CALIBRATION PROCEDURE....................................... 8
5-1 Conductivity measurement...................................
.
9
5-2 TDS ( PPM ) measurement................................... 10
5-3 Calibration...........................................................11
6. SALT MEASURING and calibration PROCEDURE...........13
6-1 Salt measurement................................................13
6-2 Calibration...........................................................14
7. OTHER FUNCTION....................................................
.
14
7-1 Data Hold............................................................14
7-2 Record ( Max./ Min. reading )...............................14
7-3 LCD Backlight ON/OFF.........................................
.
15
8. DATALOGGER...........................................................15
8-1 Preparation before execute datalo
gg
er function..................15
8-2 Auto Datalo
gg
er ( Set samplin
g
time 1 second )............≧16
8-3 Manual Datalo
gg
er ( Set samplin
g
time = 0 second ).........17
8-4 Check time information....................................................
.
17
8-5 Check samplin
g
time information.......................................18
8-6 SD Card Data structure.....................................................18
9. Saving data from the SD card to the computer............20
10. ADVANCED SETTING...............................................22
11. POWER SUPPLY from DC ADAPTER..........................
.
28
12. BATTERY REPLACEMENT.........................................
.
28
13. SYSTEM RESET.......................................................
.
29
14. RS232 PC SERIAL INTERFACE..................................29
15. OPTIONAL ACCESSORIES........................................
.
31
16. PATENT..................................................................32
1. FEATURES
* One meter for multi purpose operation :
Conductivity, TDS ( Total dissolved solids ),
Salt measurement.
* Pt glass electrode, high performance for the low
conductivity ( pure water ) measurement.
* Conductivity : 200 uS/2 mS/20 mS/200 mS.
* Salt : 0 to 12 % salt ( % weight ).
* Conductivity measurement can select Temp. Coefficient
of measurement solution.
* ATC for the conductivity measurement.
* Separate probe, easy for operation of different
measurement environment.
* Real time SD memory card Datalogger, built-in Clock
and Calendar, sampling time can set from 1 sec to 8
hour 59 min. 59 sec.
* Manual datalogger is available, during execute the
manual datalogger function, it can set the different
location no. ( position 1 to position 99 ).
* Innovation and easy operation, computer is not need to
setup extra software, after execute datalogger, just take
away the SD card from the meter and plug in the SD card
into the computer, it can down load the all the measured
value with the time information ( year/month/date/
hour/minute/second ) to the Excel directly, thenuser can
make the further data or graphic analysis by themselves.
* SD card capacity : 1 GB to 16 GB.
* LCD with green light backlight, easy reading.
* Data hold, record max. and min. reading.
* Power by UM3/AA ( 1.5 V ) x 6 batteries or DC 9V adapter.
* RS232/USB PC COMPUTER interface.
* Wide applications: water conditioning, aquariums,
beverage, fish hatcheries, food processing, photography,
laboratory, paper industry, plating industry, quality
control, school & college, water conditioning.
1
2. SPECIFICATIONS
2-1 General Specifications
Circuit Custom one-chip of microprocessor LSI
circuit.
Display LCD size : 52 mm x 38 mm
LCD with green backlight ( ON/OFF ).
Measurement * Conductivity ( uS, mS )
Function * TDS ( Total Dissolved Solids, PPM )
* Salt ( % Weight )
* Temperature ( , )℃℉
Temperature Automatic from 0 to 60 (32 - 140 ),℃℉
Compensation with temperature compensation factor
variable between 0 to 5.0% per C.
Conductivity Pt glass electrode, high performance for
Probe the low conductivity ( pure water )
measurement.
Datalogger Auto 1 sec to 8 hour 59 min. 59 sec.
Sampling Time
@ Sampling time can set to 1 second,
Setting range
but memory data may loss.
Manual Push the data logger button
once will save data one time.
@ Set the sampling time to
0 second.
@ Manual mode, can also select the
1 to 99 position ( Location ) no.
Memory Card SD memory card. 1 GB to 16 GB.
Advanced * SD memory card Format
setting * Set clock time ( Year/Month/Date,
Hour/Minute/ Second )
* Set sampling time
* Auto power OFF management
* Set beep Sound ON/OFF
* Decimal point of SD card setting
* Set temperature unit to or℃℉
* Set CD temperature compensation factor
2
Data Hold Freeze the display reading.
Memory Recall Maximum & Minimum value.
Sampling Time Approx. 1 second.
of Display
Data Output RS 232/USB PC computer interface.
* Connect the optional RS232 cable
UPCB-02 will get the RS232 plug.
* Connect the optional USB cable
USB-01 will get the USB plug.
Operating Meter 0 to 50 .℃
Temperature Probe 0 to 60 .℃
Operating Less than 85% R.H.
Humidity
Power Supply
*
A
Alkaline or heavy duty DC 1.5 V battery
( UM3, AA ) x 6 PCs, or equivalent.
*
A
DC 9V adapter input. ( AC/DC power
adapter is optional ).
Power Current Normal operation ( w/o SD card save
data and LCD Backlight is OFF) :
Approx. DC 14 mA.
When SD card save the data and LCD
Backlight is OFF) :
Approx. DC 37 mA.
*
A
If LCD backlight on, the power
consumption will increase approx.
12 mA.
Weight 489 g/1.08 LB.
Dimension Meter 177 x 68 x 45 mm
(7.0 x 2.7x 1.9 inch)
Probe Round,
12 mm Dia. x 157 mm length.
Accessories * Instruction manual......................1 PC
Included * Conductivity/TDS/Salt probe,
CDPB-04.................................... 1 PC
* Hard carrying case ( CA-06 ).......
.
1 PC
3
Optional * 1.413 mS Conductivity Standard
Accessories Solution..............................
.
CD-14
SD memory card ( 1 GB )
SD memory card ( 2 GB )
AC to DC 9V adapter.
USB cable, USB-01.
RS232 cable, UPCB-02.
Data Acquisition software,SW-U801-WIN.
2-2 Electrical Specifications (23±5 )℃
Conductivity ( uS, mS )
Range Measurement Resolutio
n
Accuracy
200 uS 0 to 200.0 uS 0.1 uS
2 mS 0.2 to 2.000 mS 0.001 mS ± (2% F.S.+1d)
20 mS 2 to 20.00 mS 0.01 mS * F.S. -
200 mS 20 to 200.0 mS 0.1 mS full scale
* Temperature Compensation :
Automatic from 0 to 60 ( 32 - 140 ), with temperature℃℉
compensation factor variable between 0 to 5.0% per C.
* The accuracy is specified under measurement value 100 mS.≦
* mS - milli Simens * @ 23± 5℃
TDS ( Total Dissolved Solids )
Range Measurement Resolutio
n
Accuracy
200 PPM 0 to 132 PPM 0.1 PPM
2,000 PPM 132 to 1,320 PPM 1 PPM ± (2% F.S.+1d)
20,000 PPM 1,320 to 13,200 PPM 10 PPM * F.S. -
200,000 PPM 13,200 to 132,000 PPM 100 PPM full scale
* Temperature Compensation :
Automatic from 0 to 60 ( 32 - 140 ), with temperature℃℉
compensation factor variable between 0 to 5.0% per .℃
* The accuracy is specified under measurement value 66,000 PPM.≦
* PPM - parts per million * @ 23± 5℃
4
Temperature
Function Measuring Range Resolutio
n
Accuracy
℃0 to 60℃℃ 0.1 ℃±0.8℃
℉32 to 140℉℉ 0.1 ℉±1.5℉
* @ 23± 5℃
Salt
Measurement 0 to 12 % salt ( % weight ).
Range
Resolution 0.01 % salt.
Accuracy ± 0.5 % salt value
5
3. FRONT PANEL DESCRIPTION
6
3-1 Display
3-2 Power Button ( Backlight Button )
3-3 Hold Button ( ESC Button )
3-4 REC Button ( Enter Button )
3-5 Mode Button ( Button )▲
3-6 Range Button ( Button )▼
3-7 Time Button
3-8 Logger Button ( SET Button, Sampling check )
3-9 Stand
3-10 Battery Compartment/Cover
3-11 Battery Cover Screw
3-12 Tripod Fix Nut
3-13 Probe Socket
3-14 DC 9V Power Adapter Input Socket
3-15 Reset Button
3-16 RS-232 Output Terminal
3-17 SD card socket
7
4. MODE SELECTION
1)Turn on the meter by pressing the " Power Button "
( 3-2, Fig. 1 ) momentarily.
*Pressing the " Power Button " ( 3-2, Fig. 1 )
continuously and > 2 seconds again will turn off the
meter.
2)The meter can select 3 kind Mode as :
a. Conductivity, TDS measurement
b.TDS measurement
c. Salt measurement
Pressing the " Mode Button " ( 3-5, Fig. 1 ) once, the
Display will show the following text in sequence :
Cd Conductivity measurement
tdS 'TDS measurement
SALt Salt measurement
Until the Display show the desired mode the meter will
execute this Mode with default.
5. CONDUCTIVITY/TDS MEASURING
and CALIBRATION PROCEDURE
The meter default function are following :
*The display unit is set to conductivity ( uS, mS ).
*The temperature unit is set to .℃
*Temp. compensation factor is set to 2.0% per C.
*Auto range.
*Auto power off.
*The sampling time of data logger function is
2 seconds.
8
Indice
Altri manuali Lutron Electronics Strumento di misura
Lutron Electronics
Lutron Electronics PM-9100HA Manuale utente
Lutron Electronics
Lutron Electronics PDO-519 Manuale utente
Lutron Electronics
Lutron Electronics EMF-819 Manuale di installazione
Lutron Electronics
Lutron Electronics ARW 4220 Manuale utente
Lutron Electronics
Lutron Electronics DW-6195 Manuale utente
Lutron Electronics
Lutron Electronics SP-82AC Manuale utente
Lutron Electronics
Lutron Electronics WA-2015 Manuale utente
Lutron Electronics
Lutron Electronics HT-3007SD Manuale utente
Lutron Electronics
Lutron Electronics DO-5512SD Manuale utente
Lutron Electronics
Lutron Electronics SL-4033SD Manuale utente
Lutron Electronics
Lutron Electronics ESF-106 Manuale utente
Lutron Electronics
Lutron Electronics VC-9200 Manuale utente
Lutron Electronics
Lutron Electronics AM-4220 Manuale utente
Lutron Electronics
Lutron Electronics DW-6093 Manuale utente
Lutron Electronics
Lutron Electronics EMF-839 Manuale utente
Lutron Electronics
Lutron Electronics PE-21 Manuale utente
Lutron Electronics
Lutron Electronics MMA-386SD Manuale utente
Lutron Electronics
Lutron Electronics Radio Powr Sav LRF2-DCRB Istruzioni per l'installazione e il funzionamento
Lutron Electronics
Lutron Electronics VB-8206SD Manuale utente
Lutron Electronics
Lutron Electronics LM-8010 Manuale utente
