Lutron Electronics PPH-2108 Manuale utente

CONTROLLER/MONITO

Model : PPH-2108

Your purchase of this pH CONTROLLER/MONITO

MONITOR marks a step forward for you into the field of

precision measurement. Althou

h this pH controller is a

complex and delicate instrument, its durable structure

developed. Please read the followin

instructions carefully

and always keep this manual within easy reach.

OPERATION MANUAL

Caution Symbol

Caution :

* Risk of electric shock !

Caution :

* Do not use fingers or any tool

to touch the FLASH TUBE.

* The instrument contains no user

serviceable parts and should not

be opened by the user.

* Repair or after service should be

done by a qualified technician

only.

* Power plug should apply the correct

ACV power voltage

* Operating duty cycle should be

adhered to.

* Cleaning - Only use the dry cloth to

clean the plastic case !

* Equipment protectted throughout

by Double Insulation or Reinforced

Insulation.

Environmental Condition

* Comply with EN61010.

Transient overvoltage at Mains Supply 2500V.

* Pollution Degree 2.

* Altitude up to 2000 meters.

* Indoor use.

* Relative humidity 80% max.

TABLE OF CONTENTS

1. FEATURES......................................................................

2. SPECIFICATIONS.............................................................2

2-1 General Specifications................................................ 2

2-2 Electrical Specifications..............................................

3. FRONT PANEL DESCRIPTION...........................................

3-1 Display.....................................................................

3-2 PV ( process value ) indicator..................................... 5

3-3 SV ( set value ) indicator............................................5

3-4 Set Button................................................................

3-5 Button..................................................................▼5

3-6 Button..................................................................▲5

3-7 PH/Temp Button........................................................5

3-8 pH control relay indicator...........................................

3-9 Temp. control relay indicator...................................... 5

3-10 pH indicator............................................................

3-11 Temp. indicator.......................................................

3-12 Wire terminals ........................................................ 5

3-13 RS232 terminal........................................................5

3-14 BNC Input socket ....................................................5

3-15 Case holder ............................................................ 5

3-16 pH Electrode plug ( optional )................................... 5

3-17 pH Electrode ( optional )..........................................

3-18 Temp. Probe ( optional )..........................................

3-19 Temp. Wires ( optional )..........................................

4. MEASURING PROCEDURE................................................

4-1 Terminal connection..................................................

4-2 pH calibration ...........................................................6

4-3 pH measurement ( with ATC probe )...........................7

4-4 pH measurement ( without ATC probe )...................... 7

4-5 1st layer setting procedures.......................................

4-6 2nd layer setting procedures......................................

5. pH CALIBRATION PROCEDURES.......................................14

6. RS232 PC SERIAL INTERFACE..........................................17

7. pH ELECTRODE QUALITY CHECK.....................................

8. SYSTEM RESET............................................................... 19

9. THE ADDRESS OF AFTER SERVICE CENTER...................... 20

1. FEATURES

* Professional pH and Temp. measurement monitor and

controller.

* pH range : 0 to 14 pH x 0.01 pH.

* pH function with high input impedance avoids measuring

error.

* Optional Temp. probe ( ATC probe, Automatic Temp.

Compensation probe ) is available for pH measurement

compensation and the Temp. measurement.

* Wide manual temperature compensation for pH function,

adjustment can be easily operated by push button on

the front panel.

* pH calibration is easily to be done by push button on the

front panel.

* Build in pH control relay and the Temp. control relay.

* Relay will be make action ( On/Off ) when the reading

value reach high limit or low limit value.

* Temperature Offset value setting.

* Hysteresis value setting for high and low alarm.

* , temp. unit setting with default.℃℉

* Large red LED display, high brightness and easy to read.

* RS232 computer interface, send out the pH and the

temperature data at the same time.

* Optional pH electrode.

* Optional Temperature probe ( ATC probe ).

* Optional data acquisition software.

* Optional GSM controller.

* Microprocessor circuit ensures high accuracy and

provides special functions and features.

* Standard 96 X 48 mm DIN case.

* Wide applications: water conditioning, aquariums,

beverage, fish hatcheries, food processing,

photography, laboratory, paper industry, plating

industry, quality control, school & college.

2. SPECIFICATIONS

2-1 General Specifications

Display 4 digits red LED, digit size : 14 mm.

Circuit Custom chip of microprocessor LSI

circuit.

Range PH 0 to 14 PH

Temp. -30 to 100 ℃

Display Unit pH pH

Temp. ,℃℉

pH Input 10^12 ohm

Impedance

Temperature Manual -30 to 100 , be adjusted by℃

Compensation push button on front panel.

for pH Automatic With the optional Temp.

measurement ( ATC ) probe ( TP-07A )

0 to 65 .℃

pH PH7, PH4, and PH10, 3 points calibration

Calibration ensure the best linearity and accuracy.

pH Optional,

Electrode Any PH electrode with BNC connector.

Temp. Probe Optional, 0 to 65 , TP-07A℃

ATC Probe

Probe Calibration Can set the meter's total operation period to

Period Setting warn the user to make the new calibration for

* PCPS function

the pH electrode.

Sampling Time Approx. 1 second.

Relay outputs Number 2 relays

Function

Relay 1 :

pH control relay.

Relay 2 :

Temperature control relay.

Max load 1 ACA/250 ACV

1 DCA/24 DCV

Setting value 1. High limit value setting.

2. Low limit value setting.

3. Hysteresis value setting.

4. Temp. Offset value setting.

* 1, 2, 3 Setting for pH and Temp. function.

External DC 12 V, 50 mA max.

Power Supply

Data Output RS 232 PC serial interface.

Operating 0 to 50 .℃

Temperature

* Meter

Operating Less than 80% R.H.

Humidity

* Meter

Power Supply 90 to 260 ACV, 50/60 Hz.

Power Approx. 4.7 VA/AC 110V.

Consumption Approx. 5.3 VA/AC 220V.

Weight 384 g/ 0.84 LB.

* Meter only.

Dimension DIN size : 96 x 48 mm.

Depth : 110 mm.

Accessories Instruction manual.........................

1 PC

Included Case holder with screw...................2 PCs

Optional PH electrodes :

Accessories

* Industrial in line pH electrode, PE-21

* General purpose PH electrode, PE-03

PH buffer solution :

* pH 7 buffer solution, PH-07, PH-07A.

* pH 7 buffer solution, PH-04, PH-04A.

* Temp. probe ( ATC probe ), TP-07A

* Data Acquisition software,

SW-U801-WIN.

* RS232 cable, UPCB-02.

* USB cable, USB-01.

* GSM controller, GSM-889.

* Interface cable ( cable between meter

to GSM-889 ), GMCB-89.

2-2 Electrical Specifications (23 ±5 )℃

pH ( meter only )

Range Resolution Accuracy

0 to 14 PH 0.01 PH ± (0.02 PH + 2 d)

Temperature

( used optional Temp. probe, TP-07 A)

Measurement Range Resolution Accuracy

℃0 to 65℃℃0 to 65℃℃0.8 .℃

℉32 to 149℉℉32 to 149℉℉1.5 .℉

Specification tests under the environment RF Field Stren

th less than 3 V/M

and frequency less than 30 MHz only.

Fig. 1

3. FRONT PANEL DESCRIPTION

Fig

3-1 Display

3-2 PV ( process value ) indicator

3-3 SV ( set value ) indicator

3-4 Set Button

3-5 Button▼

3-6 Button▲

3-7 PH/Temp Button

3-8 pH control relay indicator

3-9 Temp. control relay indicator

3-10 pH indicator

3-11 Temp. indicator

3-12 Wire terminals

3-13 RS232 terminal

3-14 BNC Input socket

3-15 Case holder

3-16 pH Electrode plug ( optional )

3-17 pH Electrode ( optional )

3-18 Temp. Probe ( optional )

3-19 Temp. Wires ( optional )

4. MEASURING PROCEDURE

Terminal layout Fig. 2

4-1 Terminal connection

1)Input the ACV power ( 90 to 260 ACV ) to T1, T2.

Do not input the

over voltage to the

AC input terminals.

2)Connect the " pH Control Relay " output from T3, T4.

Connect the " Temp. Control Relay " output from T5, T6.

4-2 pH calibration

When the first time use the pH electrode or the pH

electrode already be used a long period, then before

the measurement, it should make the

calibration first, the calibration procedures, refer to

page

Chapter 5. pH CALIBRATION PROCEDURES

4-3 pH measurement ( with ATC probe )

1)Prepare the optional Temp. probe ( ATC probe TP-07A )

connect the Temp. Wires ( 3-19, Fig. 1 ) to the " Wire

terminals " ( 3-12 ) T10, T9 ( bare wire ).

Prepare the optional pH electrode ( For example PE-21,

PE-03... ), Connect the " pH Electrode plug " ( 3-16,

Fig. 1 ) to " BNC Input socket " ( 3-14, Fig. 1 ).

2)Power on the meter, immerse the above pH electrode

and the Temp. probe into the measuring solution.

The " Display " ( 3-1, Fig. 1 ) will show the pH value,

in the same time the " pH indicator " ( 3-10, Fig. 1 )

will light.

3)Press the " PH/Temp Button " ( 3-7, Fig. 1 ) once,

the " Temp. indicator " ( 3-11, Fig. 1 ) will light, the

" Display " ( 3-1, Fig. 1 ) will show the Temp. value

that sensing from the Temp. probe ( ATC probe

TP-07A ).

* Press the " " PH/Temp Button " ( 3-7, Fig. 1 ) once again,

the " Display " will return the " pH value ", in the

same time the " pH indicator " ( 3-10, Fig. 1 ) will light again.

* The pH measurement value will be compensated automatically

by the Temp. value that sensing from the Temp. probe

( ATC probe, TP-07A ).

* During the Temp. measurement, if intend to change the default

Temp. unit from the to , refer to page 10.℃℉

4-4 pH measurement ( without ATC probe )

1)Prepare the optional pH electrode ( For example PE-21,

PE-03... ), Connect the " pH Electrode plug " ( 3-16,

Fig. 1 ) to " BNC Input socket " ( 3-14, Fig. 1 ).

Not connect the Temp. probe ( ATC probe , TP-07A ) to

the " Wire terminals " ( 3-12 ) T10, T9.

Indice

Altri manuali Lutron Electronics Strumento di misura

Lutron Electronics

Lutron Electronics FORCE GAUGE FG-6005SD Manuale utente

Lutron Electronics

Lutron Electronics AM-4234SD Manuale utente

Lutron Electronics

Lutron Electronics PM-1064SD Manuale utente

Lutron Electronics

Lutron Electronics MHT-381SD Manuale utente

Lutron Electronics

Lutron Electronics LCR-9083 Manuale utente

Lutron Electronics

Lutron Electronics WA-2017SD Manuale utente

Lutron Electronics

Lutron Electronics TU-2016 Manuale utente

Lutron Electronics

Lutron Electronics SPM-1116SD Manuale utente

Lutron Electronics

Lutron Electronics GCO-2008 Manuale utente

Lutron Electronics

Lutron Electronics SL-4010 Manuale utente

Lutron Electronics

Lutron Electronics DM-9027T Manuale utente

Lutron Electronics

Lutron Electronics FR-5120 Manuale utente

Lutron Electronics

Lutron Electronics PWA-301 Manuale utente

Lutron Electronics

Lutron Electronics HR-3023SD Manuale utente

Lutron Electronics

Lutron Electronics PM-9100HA Manuale utente

Lutron Electronics

Lutron Electronics DO-5512SD Manuale utente

Lutron Electronics

Lutron Electronics DW-6093 Manuale utente

Lutron Electronics

Lutron Electronics PDO-519 Manuale utente

Lutron Electronics

Lutron Electronics WA-2015 Manuale utente

Lutron Electronics

Lutron Electronics VB-8206SD Manuale utente

Lutron Electronics

Lutron Electronics MS-7003 Manuale utente

Lutron Electronics

Lutron Electronics HT-3007SD Manuale utente

Lutron Electronics

Lutron Electronics EM-9300SD Manuale utente

Lutron Electronics

Lutron Electronics CO2-9914SD Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente