Lutron Electronics vt-8204 Manuale utente
3 in
1
V
IBRATION
TACHOMETE
R
Model : VT-8204
Y
our purchase of this
VIBRATION TACHOMETER
marks a step forward for
you into the field o
f
precision measurement.
A
lthough this VIBRATION
TACHOMETER is a
complex and delicate
instrument, its durable
structure will allow many
years of use if proper
operating techniques are
developed. Please read
the following instructions
carefully and always keep
this manual within easy
reach.
OPERATION MANUAL
TABLE OF CONTENTS
1 FEATURES................................................................
.
1
2 SPECIFICATIONS......................................................
.
3
3 FRONT PANEL DESCRIPTION.....................................7
3-1 Display....................................................................
.
7
3-2 Power button ( vibration ).........................................7
3-3 Hold/ESC/Zero button...............................................7
3-4 Eenter/REC button....................................................7
3-5 Function/Send button...............................................
.
7
3-6 Unit/Logger button................................................... 7
3-7 Operation button ( tachometer )................................7
3-8 Surface speed wheel ( contact tach. )........................7
3-9 RPM adapter ( contact tach. )....................................7
3-10 Protection cover ( contact tach. )..............................7
3-11 Screw for protection cover.......................................
.
7
3-12 BNC plug ( vibration sensor )....................................7
3-13 Vibration sensor.......................................................7
3-14 Magnetic base.........................................................
.
7
3-15 BNC socket ( vibration sensor ).................................7
3-16 Laser light beam ( photo tach. )...............................
.
7
3-17 Photo tach. detecting sensor....................................
.
7
3-18 IR probe input socket...............................................7
3-19 RS-232 output terminal............................................7
3-20 Battery cover/battery compartment..........................
.
7
3-21 Cone rubber ( RPM adapter )....................................7
3-22 Funnel rubber ( RPM adapter ).................................
.
7
4 VIBRATION MEASURING PROCEDURE........................9
5 TACHOMETER MEASURING PROCEDURE....................
.
20
6 IR TEMP. MEASURING PROCEDURE............................24
7 RS232 PC SERIAL INTERFACE....................................24
8 BATTERY REPLACEMENT...........................................
.
26
9 OPTIONAL ACCESSORIES..........................................
.
26
10 CLASSIFICATION RANGES ( Vibration ).....................
.
27
11 SENSITIVITY RELATIVE TABLE ACCORDING
ISO 2954 ( Vibration ).............................................
.
28
1. FEATURES
Vibration function :
* Applications for industrial vibration monitoring :
All industrial machinery vibrates. The level of vibration
is a useful guide to machine condition. Poor balance,
misalignment & looseness of the structure will cause
the vibration level increase, it is a sure sign that the
maintenance is needed.
* Acceleration range : 200 m/s^2.
* Velocity range : 200 mm/s.
* Displacement ( p-p ) range : 2 mm.
* Metric and imperial display unit .
* RMS measurement for Acceleration and Velocity.
* Peak to peak measurement for Displacement.
* Peak function for Acceleration and Velocity.
* Max. hold function for Acceleration ( peak ),
Velocity ( peak ) and Displacement ( peak to peak ).
* Frequency range 10 Hz - 1 kHz, sensitivity relative
meet ISO 2954.
* Zero function, executed by front buttons.
* Data logger function with flexible sampling time
selection, can save max. 1000-point data into the
memory circuit.
* Data hold button to freeze the desired reading.
* Memory function to record maximum and minimum
reading of RMS value ( Acc., Vel. ) or Displacement ( p-p ).
* Auto shut off saves battery life.
* Professional vibration meter supply with separate
vibration sensor & magnetic base, full set.
1
Tachometer ( photo, contact ) function :
* Laser light detecting source, long measuring range up
to 1.5 meters, it is useful in the RPM measurement
application where the machine would be a risk to the
operator or close access is difficult or not possible.
* The best Tachometer in the world. 2 in 1, one
instrument combine Photo Tachometer & Contact
Tachometer.
* Wide measuring range from 0.5 to 100,000 RPM, 0.1
RPM resolution for the measured value < 1000 RPM.
* Microprocessor based circuit, crystal time base, high
precision with 0.05% accuracy.
* Memory with recall function, the last value, max., value,
min. value will be stored into the memory automatically.
* Patent patented.
General function :
* Super large LCD display.
* No contact infrared temperature measurement via
optional IR temp. probe.
* RS 232 computer interface.
* Optional data acquisition software and data logger
software.
* Microcomputer circuit, high performance.
* Built-in low battery indicator.
* Heavy duty & compact housing case.
* Complete set with the hard carrying case.
2
2. SPECIFICATIONS
2-1 Vibration function
Velocity 0.5 to 199.9 mm/s
range 0.05 to 19.99 cm/s
0.02 to 7.87 in/s
Remark
Velocity peak range :
1.0 to 199.9 mm/s
Acceleration 0.5 to 199.9 m/s^2
range 0.05 to 20.39 g
2 to 656 ft/s^2
Remark
Acceleration peak range :
1.0 to 199.9 m/s^2
Displacement 0.005 to 1.999 mm
( p-p ) 0.002 to 0.078 inch
* p-p : Peak to Peak
Frequency 10 Hz to 1 KHz
range
* Sensitivity relative during the
the frequency range meet ISO 2954
Refer to table 1, page 28.
Function Velocity RMS, Peak, Max. hold (peak).
Acceleration RMS, Peak, Max. hold (peak).
Displacement p-p, Max. hold (p-p).
* Peak : To measure the peak value.
Note : Peak function is available when the
measuring value > 25 digits only.
* p-p : Peak to peak value.
* Max. hold : To hold the max. peak or p-p value.
Accuracy ± ( 5 % + 5 d ) reading , 160 Hz, 80 Hz.
* 23 ± 5 ℃
Calibration Velocity 50 mm/s ( 160 Hz )
point Acceleration 50 m/s^2 ( 160 Hz )
Displacement ( p-p ) 0.14 mm ( 160 Hz )
Data hold Freeze the desired reading.
3
Memory Maximum & Minimum value.
*
Memory function are only available for
RMS ( Acc., Vel. ) and Displacement (p-p).
Sampling time Approx. 1 second.
Data logger Data logger function with flexible
sampling time selection, can save max.
1000-point data into the memory circuit.
Sampling Time Manual Push the data logger button
of Data Logger once will save the data one
time.
Auto 1, 2, 10, 30, 60, 600, 1800,
3600 seconds.
Sampling time Approx. 1 second.
Power off Auto shut off, saves battery life,
or manual off by push button.
2-2 Tachometer ( photo, contact ) function
Range Photo Tachometer : 10 to 99,999 RPM
Contact Tachometer : 0.5 to 19,999 RPM
Surface Speed ( m/min. ) :
0.05 to 1,999.9 m/min.
Surface Speed ( ft/min. ) :
0.2 to 6,560 ft/min.
Accuracy ± ( 0.05 % + 1 digit ).
Resolution 0.1 RPM < 1,000 RPM
1 RPM 1,000 RPM≧
0.01 m/min. < 100 m/min.
0.1 m/min. 100 m/min.≧
0.1 ft/min. < 1000 ft/min.
1 ft/min. 1,000 ft/min.≧
Time base Quartz crystal
4
Sampling Time Photo Tachometer - 1 sec. ( 60 RPM ).≧
Contact Tachometer - 1 sec. ( 6 RPM ).≧
Photo 50 - 1,500 mm typically.
Tachometer
* Spec. of detecting distance are that under
detecting
the size of reflecting tape is 10 mm square
distance
& the measuring RPM value is 1,800 PPM.
The max. & min. detecting distance may
change under different environment,
different reflecting tape or the measuring
RPM beyond 1800 RPM.
Laser light * Less than 1 mW.
source * Class 2 laser diode. Red. Wave length
* Photo Tach.
is 645 nm approximately.
Memory Last value, Max. value, Min. value.
2-3 General function
Display 45 mm x 48 mm LCD size.
Circuit Exclusive microcomputer circuit.
Data output RS 232 serial output.
Operating 0 to 50 ( 32 to 122 ).℃℉
temperature
Operating Less than 80% RH.
humidity
Power supply 1.5 V battery x 4 PCs
UM-3, AA, R6
Alkaline or heavy duty type,
5
Power Vibration Approx. 18 mA
consumption Contact Tach. Approx. 20 mA
Photo Tach. Approx. 31 mA
Weight Meter 397 g/0.87 LB
Probe with 110 g/0.24 LB
magnetic base
Dimension Meter :
46.8 x 75.5 x 188 mm
( 1.8 x 3.0 x 7.4 inch ).
Vibration sensor probe:
Round 18 mm Dia. x 40 mm.
Accessories Instruction manual......................... 1 PC.
included Vibration sensor ( VB-82 )..............
.
1 PC.
Magnetic base...............................
.
1 PC.
Reflecting tape marks (600 mm)..... 1 PC.
RPM cone rubber, AS-35A............... 1 PC.
RPM funnel rubber, AS-35B............
.
1 PC.
Carrying Case................................
.
1 PC.
Optional *Data Acquisition software,
accessories ................................SW-U801-WIN
*Data Logger software, SW-DL2005
*RS232 cable..............UPCB-02
*USB cable.................
.
USB-01
*IR Temp. probe.........IR-962
6
3. FRONT PANEL DESCRIPTION
Fig. 1
7
3-1 Display
3-2 Power button ( vibration )
3-3 Hold/ESC/Zero button
3-4 Eenter/REC button
3-5 Function/Send button
3-6 Unit/Logger button
3-7 Operation button ( tachometer )
3-8 Surface speed wheel ( contact tach. )
3-9 RPM adapter ( contact tach. )
3-10 Protection cover ( contact tach. )
3-11 Screw for protection cover
3-12 BNC plug ( vibration sensor )
3-13 Vibration sensor
3-14 Magnetic base
3-15 BNC socket ( vibration sensor )
3-16 Laser light beam ( photo tach. )
3-17 Photo tach. detecting sensor
3-18 IR probe input socket
3-19 RS-232 output terminal
3-20 Battery cover/battery compartment
3-21 Cone rubber ( RPM adapter )
3-22 Funnel rubber ( RPM adapter )
8
Altri manuali per vt-8204
1
Indice
Altri manuali Lutron Electronics Strumento di misura
Lutron Electronics
Lutron Electronics LCR-9083 Manuale utente
Lutron Electronics
Lutron Electronics EMF-819 Manuale di installazione
Lutron Electronics
Lutron Electronics DT-2230 Manuale utente
Lutron Electronics
Lutron Electronics VB-8206SD Manuale utente
Lutron Electronics
Lutron Electronics SOIL PH METER Manuale utente
Lutron Electronics
Lutron Electronics PWA-301 Manuale utente
Lutron Electronics
Lutron Electronics CO2-9904SD Manuale utente
Lutron Electronics
Lutron Electronics FR-5105 Manuale utente
Lutron Electronics
Lutron Electronics HT-315 Manuale utente
Lutron Electronics
Lutron Electronics Radio Powr Sav LRF2-DCRB Istruzioni per l'installazione e il funzionamento
Lutron Electronics
Lutron Electronics EM-1910 Manuale utente
Lutron Electronics
Lutron Electronics AM-4233SD Manuale utente
Lutron Electronics
Lutron Electronics GCO-2008 Manuale utente
Lutron Electronics
Lutron Electronics SL-4010 Manuale utente
Lutron Electronics
Lutron Electronics SPM-1116SD Manuale utente
Lutron Electronics
Lutron Electronics PDO-519 Manuale utente
Lutron Electronics
Lutron Electronics LX-1128SD Manuale utente
Lutron Electronics
Lutron Electronics TU-2016 Manuale utente
Lutron Electronics
Lutron Electronics MO-2014 Manuale utente
Lutron Electronics
Lutron Electronics MS-7003 Manuale utente
