M2 Antenna Systems 2M4X Manuale utente

M2 Antenna Systems, Inc. 4402 N. Selland Ave. Fresno, CA 93722

Tel: (559) 432-8873 Fax: (559) 432-3059 Web: www.m2inc.com

Rev.01

Model .........................................2M4X

Frequency Range.......................144 To 148 MHz

*Gain ..........................................9.6 dBi

Front to back ..............................20 dB Typical

Beamwidth ...............................E=54° H=74°

Feed type ...................................“T” Match

Feed Impedance. .......................50 Ohms Unbalanced

Maximum VSWR........................1.5:1

Input Connector..........................“N” Female

Power Handling ..........................1.5 kW

Boom Length / Dia......................48” / 1”

Maximum Element Length..........40-1/2”

Turning Radius: ..........................55”

Stacking Distance.......................66” High & 80” Wide

Mast Size....................................1-1/2” to 2” Nom.

Wind area / Survival ...................0.50 Sq. Ft. / 100 MPH

Weight / Ship Wt.........................3 Lbs. / 4 Lbs.

M2 Antenna Systems, Inc.

Model No: 2M4X

FEATURES:

M2 is always trying to design and build new antennas to fit the needs of amateur radio operators. The “X” series of antennas are all designed

to keep the packaging under 48” long to minimize oversize surcharges applied by shippers. The “X” series antennas offer the same performance as its

predecessor, but with shorter boom sections. The boom sections also have a thicker wall for added strength. A side benefit of the “X” series antennas

are that they are more portable with the smaller sections. The 2M4X replaces our very popular 2M4.

Each models performance is optimized for a specific mode and frequency range, with no compromises to achieve unneeded bandwidth. The

2M4X covers 144-148 MHz .Where do you want to make yourself heard? The 2M4X is an ideal building blocks for a small turning radius, high-gain

stacked array. Great for QTH’s that won’t permit a long boom Yagi. The 2M4X can be stacked on a cross boom for the same gain increases, and the

turning radius is still a very manageable 10 ft.

The heart of these antennas is a driven element module originally designed for maritime ATS satellite service. All connectors are O-ring

sealed to the CNC machined block. Internal connections are sealed with a space-age silicone gel with nearly 4 times the dielectric strength of air. The

balun connectors are triple sealed on the coax and nut-sealed at the block connectors. The type “N” feed connector uses a gold-plated, beryllium copper

center pin.

Elements are 6061-T6 3/16” solid rod with UV stabilized polyethylene Button insulators and stainless steel keepers. Thousands of these type ele-

ments are in amateur and commercial service with NO failures! Booms are constructed of 6061-T6 aluminum alloy tubing. Other key electrical and me-

chanical components are CNC machined for accuracy and durability. All hardware is stainless steel except the U-bolts. For uncompromising perfor-

mance and long term electrical / mechanical integrity, the 2M4X is unmatched.

SPECIFICATIONS:

*Subtract 2.14 from dBi for dBd

Tools handy for assembly process: screwdriver, 11/32” spin-tite or socket, 7/16” and 1/2” end wrenches /

sockets, measuring tape.

1. Lay out the elements by length and position as shown the DIMENSION sheet. Start with the

REFLECTOR (longest) element. Balance on finger to find rough center and push on a black button

insulator to about 1/2” from center. Push the element through the holes 10" from the rear of the boom

and install the second button, snugging it up into boom. DO NOT BOTHER WITH ACCURATELY

CENTERING the element at this time and DO NOT INSTALL the stainless steel SHAFT RETAINERS

yet. This is easier to do after all the elements are installed in the boom. Install the 3/16” rod DRIVEN

ELEMENT as you did the reflector and then the DIRECTORS.

2. Now accurately center the elements. Use a tape measure to EQUALIZE the amount the element

sticking out on each side of the boom. Begin installing the stainless SHAFT RETAINERS. Use thumb

and index finger to hold a retainer over end of the 3/8 x 3” push tube (retainer dished into tube). Hold

the element firmly and start the retainer onto the rod by applying pressure with the push tube. Push

the retainer until up tight against the button insulator (Locking pliers, lightly clamped up against

opposite button insulator will help maintain center reference and keep you from pushing the first

retainer too far). Repeat for the opposite side. Continue installing retainers until all elements are

locked in place.

3. Mount the “T” MATCH BLOCK ASSEMBLY to the top of the boom using a single 8-32 X 1-1/4" screw.

Orient the block with feed connector facing the rear and balun connectors facing forward.

4. Attach balun to the Block and tighten the connectors gently using a 7/16" end wrench. A lot of torque

is unnecessary. Form the balun close to the boom and secure with a nylon cable ties. Ties should be

snug but not crushing or kinking the coax.

2M4X ASSEMBLY MANUAL

5. Install the 8-32 x 1/4” set screws (internal Allen head - tool supplied) into the SHORTING BARS.

Slide the bars onto the 3/16” rod driven element tips and then onto the Driven Element Block

Rods. Position the Shorting Bars as specified on the Dimension Sheet: 1-3/4”. Align the bars and

rods with each other and tighten the setscrews.

6. The boom to mast plate is normally mounted at the rear. Use two 1" U-bolts and the stainless nuts

and lock washers provided (cradles are not used). DO NOT OVER TIGHTEN. 2” U-bolts are

provided for mounting the antenna to your mast.

THIS COMPLETES THE ANTENNA ASSEMBLY.

7. INSTALLATION AND STACKING INFORMATION

A. To protect your investment in this high performance antenna, always use high quality coax and

connectors. Old, corroded, or poor quality materials are common sources of serious performance

losses.

B. If possible, test the antenna, connectors and feedline BEFORE installing to your mast or tower.

At 6 feet or more the antenna will exhibit VSWR similar to higher mounting heights. Set antenna

on a ladder or temporary mast. Check for continuity and match across the rated bandwidth.

C. REAR MOUNTING: The 2M4X is easily rear-mounted in either horizontal or vertical polarity. A

metal mast or crossboom will have no effect on performance.

D. CENTER MOUNTING: Metal masts or crossbooms are OK for center mounting the antenna IF

they are at right angles to the element plane. ALWAYS use a NON-CONDUCTIVE mast or

crossboom IF it will be in the element plane. A metal mast in the element plane WILL adversely

affect performance. The feed coax, too, if routed to the center, must exit the boom at right angles

to the element plane. For example, with a vertically polarized antenna on a vertical non-

conductive mast, loop the coax out at a right angle from the elements and reattach to mast at least

6” below the element tips. Or, the coax can exit the rear of the boom and loop back to the mast.

Fiberglass is the prime material for a non-conductive mast because of it’s strength and weather

resistance. Wooden rod can also be used or thick-wall PVC pipe with a wooden rod inside for

support.

Carefully manufactured by:

M2 ANTENNA SYSTEMS, INC.

4402 N. Selland Ave.

Fresno, CA 93722

(559) 432-8873 Fax: 432-3059

www.m2inc.com Email: sales@m2inc.com

2M4X ASSEMBLY MANUAL

2M4X DIMENSION SHEET

DESCRIPTION QTY

BOOM, 1 X .065 X 27-1/4” ALUM (M2ABS2M4X-1).................................... 1

BOOM, 1 X .065 X 27-1/4” ALUM (M2ABS2M4X-2).................................... 1

ELEMENTS, 3/16" ROD ALUM ........................ .......................................... 4

DRIVEN ELEMENT ASSEMBLY (SADEA2MVHF1).................................... 1

BTM PLATE, 3 X 4 X 1/8” (M2APT0019).......... .......................................... 1

BALUN, RG-6................................................... .......................................... 1

U-BOLT AND CRADLE, 2" .............................. ......................................... 2

U-BOLT, 1" ...................................................... .......................................... 2

ASSEMBLY INSTRUCTIONS........................... .......................................... 1

HARDWARE BAG

SHORTING BAR (M2ASB0090) ....................... .......................................... 2

NUT, 5/16-18 SS............................................... .......................................... 4

LOCK WASHER, 5/16" SPLIT RING SS........... .......................................... 4

NUT, 1/4-20 SS ................................................ .......................................... 4

LOCK WASHER, 1/4" SPLIT RING SS ............ .......................................... 4

SETSCREW, 8-32X1/4” INT. ALLEN, SS......... .......................................... 4

SCREW, 8-32 X 1-1/4" PAN HEAD SS ............ .......................................... 3

LOCKNUT, 8-32” SS......................................... .......................................... 2

BUTTON INSULATOR 3/16" BLACK POLY ..... .......................................... 8

SHAFT RETAINER, 3/16" SS ........................... .......................................... 8

PUSH TUBE, 3 X 3/16" (RETAINER TOOL).... .......................................... 1

ALLEN WRENCH, 5/64" ................................... .......................................... 1

CABLE TIE ....................................................... .......................................... 3

M2 ANTENNA SYSTEMS, INC.

4402 N. Selland Ave.

Fresno, CA 93722

(559) 432-8873 Fax: 432-3059

www.m2inc.com Email: sales@m2inc.com

2M4X PARTS & HARDWARE

Indice

Altri manuali M2 Antenna Systems Antenna

M2 Antenna Systems

M2 Antenna Systems 1700-26-2 Manuale utente

M2 Antenna Systems

M2 Antenna Systems 35.7-4 Manuale utente

M2 Antenna Systems

M2 Antenna Systems EB-432/RK70CM Manuale utente

M2 Antenna Systems

M2 Antenna Systems 440-460-11HD Manuale utente

M2 Antenna Systems

M2 Antenna Systems KT34M2 Manuale utente

M2 Antenna Systems

M2 Antenna Systems 440-6SX Manuale utente

M2 Antenna Systems

M2 Antenna Systems 248CP22A Manuale utente

M2 Antenna Systems

M2 Antenna Systems 2M4 Manuale utente

M2 Antenna Systems

M2 Antenna Systems 440-6SS Manuale utente

M2 Antenna Systems

M2 Antenna Systems 6M7JHVHD Manuale utente

M2 Antenna Systems

M2 Antenna Systems 222XP30 Manuale utente

M2 Antenna Systems

M2 Antenna Systems 167XP22 Manuale utente

M2 Antenna Systems

M2 Antenna Systems 2M5WL Manuale utente

M2 Antenna Systems

M2 Antenna Systems 436CP30 Manuale utente

M2 Antenna Systems

M2 Antenna Systems 12M4DX Manuale utente

M2 Antenna Systems

M2 Antenna Systems 393CP18 Manuale utente

M2 Antenna Systems

M2 Antenna Systems EB-144/RK2M Manuale utente

M2 Antenna Systems

M2 Antenna Systems 6M6LN Manuale utente

M2 Antenna Systems

M2 Antenna Systems 902-5 YAGI Manuale utente

M2 Antenna Systems

M2 Antenna Systems 295XP6 Manuale utente

M2 Antenna Systems

M2 Antenna Systems 915XBISP Manuale utente

M2 Antenna Systems

M2 Antenna Systems 222-10EZ Manuale utente

M2 Antenna Systems

M2 Antenna Systems 40M4LLDD Manuale utente

M2 Antenna Systems

M2 Antenna Systems 2MCP22 Manuale utente

Manuali Antenna popolari di altre marche

Alfa Network

Alfa Network APA-L01 Manuale utente

Naval

Naval PR-422CA Manuale utente

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Manuale utente

TERK Technologies

TERK Technologies TV44 Manuale utente

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Manuale utente

HP J8999A Manuale utente

MobilSat

MobilSat MSP-S Manuale utente

Steren

Steren ANT-UHF 13 Manuale utente

Novatel

Novatel 600-G Manuale operativo

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Manuale utente

TRENDnet

TRENDnet TEW-AO12O Manuale utente

Radio Shack

Radio Shack 15-1837 Manuale utente

CommScope

CommScope CMAX-OMFX-43M-I53 Manuale utente

Ramsey Electronics

Ramsey Electronics DAP25 Manuale utente

COBHAM

COBHAM SAILOR 800 VSAT Manuale per l'uso e la cura

Trango Systems

Trango Systems AD900-9 Manuale utente

Steren

Steren ANT-100 Manuale utente

Proxim

Proxim 5054-PA-23 Manuale utente