MAXPhotonics MFP-100W Manuale utente
Q-SWITCHED PULSED FIBER LASER(MFP100W-300W)
Maxphotonics Co.,Ltd.
Copyright Notation
Copyright © Maxphotonics Co., Ltd (hereafter referred to as
Maxphotonics). All rights reserved. You may not copy, modify, transmit or
publish this publication, in any form, in any media or by any means, without
the prior written permission of Maxphotonics, except as allowed under
applicable copyright laws. Permitted copies shall bear the same copyright
and proprietary notices that were contained on the original version.
All information contained in this document is subject to change and
revision without notice. Maxphotonics believes that the information
provided is accurate and reliable; however Maxphotonics makes no
warranty, representation, expression or implication that this document can
be used as reference in other occasions. Furthermore, Maxphotonics does
not assume responsibility for any infringement of patents or other rights
of third parties due to use of the information contained in this document.
Maxphotonics shall not be liable for errors contained in this document or
for direct or indirect damages of relevant equipment.
Maxphotonics grants no rights for patent or other intellectual property
mentioned herein.
Maxphotonics and the Maxphotonics Logo are registered trademarks of
Maxphotonics Co., Ltd., and the Logo does not break any regulations of
Trademark law.
Subject to change without notice.
Maxphotonics Co.,Ltd.
Address: Maxphotonics Industrial Park, 3rd Furong Road,
Furong Industrial Area, Shajing, Baoan, Shenzhen, China.518125
E-Mail: [email protected]
http://en.maxphotonics.com
1
Preface
Thank you for using the Q-Switched Pulsed Fiber Laser (MFP100W-
300W) Series products from Maxphotonics. We compile this document
for you in order that the laser is used and maintained properly. Due to the
limited level of the translaters, coupled with time constraints, there are
some careless mistakes in this document, and your understanding will be
much appreciated. Thank you again for using Maxphotonics' products.
Please take time to read and understand this User’s Guide and
familiarize yourself with the operating and maintenance instructions before
you use the product. We recommend that the operator read the Section
titled “Safety Information” prior to operating the product.
This User’s Guide should stay with the product to provide you and all
future users and owners of the product with important operating, safety
and other information.
We identify the parts to which you need to pay special attention in the
document with underscore. Please notice those information to prevent the
unnecessary damages.
2
Company Profile
As a large laser manufacturer founded in 2004, Maxphotonics Co., Ltd.
specializes in research and development, production and sales of lasers
and ancillary products. Maxphotonics owns a number of independent
intellectual property rights and patents as well as high-power pulsed fiber
laser, high-power fiber laser and high-power fiber amplifier etc.
So far, with intellectual property rights and patents, Maxphotonics owns
industrial pulsed fiber laser series, fiber laser for scientific researches,
tunable fiber laser, fiber amplifier, ASE light source, etc. Those products
are widely applied to fields of laser marking, DTS system and scientific
research.
Maxphotonics offers laser, relevant solution and ancillary facility to
domestic and foreign customers. We adhere to the enterprise mission
statement of ''Maxphotonics leads the industry'', take customer satisfaction
as the start point, completely implement ISO9001 quality management
system, introduce ERP information management system and provide all-
round pre-sales and after-sales service for customers.
Relying on excellent ability of product design and development, we
carry out all-round exchanges and cooperation with international famous
laser companies and various research institutions of China, continuously
increase the investment of science research, constantly update
diversification of production types, lead the trend of the industry and create
maximum value for customers, so as to strive perseveringly for the world-
class laser manufactures and forge ahead.
Contents 3
Company Profile ……………………………………………………………… 2
Chapter 1 Characteristic Explain ……………………………………… 5
Chapter 2 General Safety Information ……………………………… 6
1-Safety Conventions ………………………………………………………… 6
2-Laser Protection …………………………………………………………… 7
3-General Safety Instructions ……………………………………………… 7
4-Additional Safety Information …………………………………………… 12
Chapter 3 Product Description ………………………………………… 13
1-Property Introductions …………………………………………………… 13
2-Laser Model Designation Codes ……………………………………… 14
3-Certification ………………………………………………………………… 14
Chapter 4 Specification …………………………………………………… 15
1-Optical Characteristic Parameters ……………………………………… 15
2-General Characteristic Parameters …………………………………… 16
Contents
4
3-Structural Layout …………………………………………………………… 17
Chapter 5 Operation Guide ……………………………………………… 20
1-Electrical Power Connection …………………………………………… 20
2-Control Connector Pin Assignment, DB-25 plug …………………… 21
3-Laser Operation Using Digital Interface ……………………………… 26
Chapter 6 Common Fault Treatment ………………………………… 28
1-Laser Emission Failure …………………………………………………… 28
2-Power Drops ………………………………………………………………… 28
Chapter 7 Service and Maintenance ………………………………… 30
1-Maintenance Notes ………………………………………………………… 30
2-Service Statements ………………………………………………………… 31
Chapter 8 Warranty Statements………………………………………… 32
1-General Items ……………………………………………………………… 32
2-Warranty Limitations ……………………………………………………… 32
5
The Q-Switched Pulsed Fiber Laser (MFP100W-300W) Series products
provide a wide range of lasers, the emission wavelength of which is
centered at 1060nm. They are air-cooled and maintenance-free and
deliver high efficiency, high reliability, and high performance on marking
and engraving, which makes them ideal tools in this area.
Maxphotonics' Q-Switched Pulsed Fiber Laser (MFP100W-300W) Series
are Class 4 laser products and are designed and tested with safety. By
following this User Guide and applying sound laser safety practices, it will
be a safe and reliable device.
Laser light exhibits unique characteristics that may pose safety hazards.
Therefore, the laser light can’t be normally associated with other light
sources, and all operators and people near the laser must be aware of
these special hazards.
In order to ensure the safe operation and optimal performance of the
product, please follow all warnings and safety instructions in this guide
during process of operation, maintenance and service.
For ensuring the safety of operators, operators are urged not to open
the equipment privately at all times. There are no user serviceable
parts, equipment or assemblies associated with this product. Lasers of
unauthorized disassembly shall not be subject to warranty.
Chapter 1
Characteristic Explain
6
Chapter 2
General Safety Information
1-Safety Conventions
All safety warning symbols during operating process of the laser include:
SYMBOLS DESCRIPTION
WARNING :
Refer to a potential Electrical Hazards to human body;
It requires certain procedures; otherwise, it may result
in bodily harm to you and/or others. In order to ensure
the personal safety of operators, do not violate the
requirement of the WARNING sign.
CAUTION :
Refers to a potential hazard on product. It requires
certain procedures; otherwise, it may result in
damage to the product or components. In order to
ensure normal use of equipment, do not violate the
requirement of the CAUTION sign.
WARNING :
Refers to a potential Laser Hazard.
The symbol represents laser radiation. The symbol is
pasted on laser output end.
NO SYMBOL
IMPORTANT :
Refers to any information regarding the operation of
the product. Please do not overlook this information.
7
Chapter 2 General Safety Information
NOTE :
◎ This device is classified as a high power Class IV laser instrument. It may
emit up to 300W average power near 1060nm wavelength. This level of
light may cause damage to the eye and skin. Despite the radiation being
invisible, the beam may cause irreversible damage to the retina. Laser
safety eyewear is not provided with this instrument, but must be worn at all
times while the laser is operational. Use appropriate laser safety eyewear
when operating this device. The manufacturer of the laser system is
responsible for the safety compliance according to the applicable
standards and regulations.
2-Laser Protection
1.Laser Protection Requirements
You must wear the safety protective glasses while operating the laser,
and rationally select the safety protective glasses according to the lasing
wavelength of the laser. If the device is a tunable laser or Raman product,
it emits light over a range of wavelengths and the end user should confirm
the laser safety eyewear used protects against light emitted by the device
over its entire range of wavelength.
2.Laser Protective Equipment Suppliers
Maxphotonics recommends material or equipments provided by following
laser protective equipment suppliers for you, including LaserVision USA,
Kentek Corporation, Rochwell Laser Industries, etc. All the supplier
information is provided by Maxphotonics only for the convenience to use,
so Maxphotonics assumes no responsibility for any problem caused by
using the products of abovementioned suppliers.
3-General Safety Instructions
In order to ensure the safe operation and optimal performance of the
8Chapter 2 General Safety Information
product, please follow these warnings and cautions in addition to the other
information contained elsewhere in this document.
1.Specular Reflection
There are often numerous secondary laser beams produced at various
angles in the output port of the laser. These divergent beams are produced
when the primary beam of laser reflects off a smooth surface, and they are
called specular reflections. Although these secondary beams may be less
powerful than the total power emitted from the primary beam, the intensity
may be great enough to cause damage to the eyes and skin as well as
surface of materials.
WARNING :
◎ You must exercise caution to avoid/minimize specular reflections as
these laser radiations are invisible!
2.Safety Instructions of Accessories
WARNING :
◎ This device has an output optical head connected to the laser by a
fiber cable. Please, be careful dealing with the output head.
3.Optical Operating Instructions
We strongly recommend that you read the following procedures before
operating the laser:
（1）Never look directly into the laser output port when the power is turned
on.
（2）Avoid positioning the laser and all optical output components at eye
level.
（3）Ensure that all personal protective equipment is suitable for the
output power and wavelength ranges of the laser.
Altri manuali per MFP-100W
1
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali MAXPhotonics Strumento di misura
MAXPhotonics
MAXPhotonics MFSQ QCW Series Manuale utente
MAXPhotonics
MAXPhotonics MFSC-1000X G4.0 Series Manuale utente
MAXPhotonics
MAXPhotonics MFP-5W Manuale utente
MAXPhotonics
MAXPhotonics MFPT-20H Manuale utente
MAXPhotonics
MAXPhotonics MFP-20 Manuale utente
MAXPhotonics
MAXPhotonics MFSC 3000W Series Manuale utente
