MC Technologies MC-LR Manuale utente
MC-LR/MC-LR-4
MC-LRS/MC-LRS-4
User Manual/Web Interface
Router Description
MC Technologies routers are designed for industrial use.
Advantages at a glance:
• Easy expansion of protected networks.
• High-security data transfer via IPsec or OpenVPN tunnel, plus integrated firewall.
• Easy and identical configuration of router family via integrated web server, USB stick
or "remote".
• Event alerts by email.
• Top-hat rail mounting.
• Use of applications with RS232 or RS485 interfaces on demand
(only 2 port variantes).
• Integrated logbook records device-specific events.
• Delivered ready-to-use, including power supply plug and Ethernet connecting cable.
All specifications for the 2-port version also apply for the 4-port version.
2MC Technologies GmbH
User Manual/Web Interface MC-LR/MC-LR-4/MC-LRS/MC-LRS-4 – 01/2018 (FW 2.07.3) 3
Contents
1. Configuration via the integrated web interface 4
1.1 Preparations 4
1.2 Configuration 1.2.1 Configuration via web interface 4
1.2.2 Local IP address is not (longer) known - configuration button 4
1.2.3 Resetting all parameters 4
1.3 Status 1.3.1 Network Connections 5
1.3.2 I/O Status 6
1.3.3 ComSERVER (Only for MC Router with RS232 or RS485 interface on X1) 6
1.3.4 Routing Table 6
1.3.5 DHCP Leases 7
1.4 Local Network 1.4.1 IP Configuration 7
(Lokales Netzwerk) 1.4.2 DHCP Server 8
1.4.3 Local Static Routes 9
1.5 Wide Area Network 1.5.1 WAN Setup 10
1.5.1.1 Static Address- Preferred setting for operation
in local networks 10
1.5.1.2 DHCP Client- Preferred setting for operation
with cable modems 11
1.5.1.3 PPPoE- Preferred setting for operation
with DSL modems 11-12
1.5.2 Static Routes 12
1.5.3 DynDNS 13
1.5.4 Connection Check 14
1.6 Networtk Security 1.6.1 General Setup 15
(Netzwerksicherheit) 1.6.2 Firewall 16
1.6.3 NAT Table (Port forwarding) 17
1.7 VPN 1.7.1 IPsec 1.7.1.1 Connections 18-21
1.7.1.2 Certificates 22
1.7.1.3 Status 22
1.7.2 OpenVPN 1.7.2.1 Connections (Tunnel 1 and 2 / Clients) 23-25
1.7.2.2 Connections Server (only MC-LR Server) 26-29
1.7.2.3 Port Forwarding 29
1.7.2.4 Certificates 30
1.7.2.5 Static Keys (Preshared Key) 30
1.7.2.6 Status 31
1.8 I/O 1.8.1 Inputs 32
1.8.2 Outputs 32-33
1.8.3 Socket Server 33
1.9 System 1.9.1 Hardware 34
1.9.2 Software 35
1.9.3 System Configuration 35-38
1.9.4 User 39
1.9.5 Log-File 39
1.9.6 ComSERVER (Only for MC Router with RS232 or RS485 interface on X1) 40
1.9.7 SMTP Configuration - sending emails 40-41
1.9.8 Configuration Up-/Download 41
1.9.9 RTC - Setting the time and date / Time Server 42
1.9.10 Reboot - restarting the router 43
1.9.11 Firmware Update 43
2. Additional functions 2.1 Router configuration using SSH and XML file 44
2.1.1 Download configuration via SSH 44
2.1.2 Upload configuration via SSH 44
2.2 Sending and receiving IO status, email and router status using XML
files via the router socket server 45
2.2.1 Sample XML files 45
2.2.2 Functions test using Windows HyperTerminal 46
MC Technologies GmbH
4
1. Configuration via the integrated web interface
1.1 Preparations
1. Hook the router up to the power supply using connection "P1", "P2v or "POW".
2. To configure, connect the PC and the router to Ethernet port “ETH1“ using an Ethernet cable.
3. For configuration, you will need a browser (i.e. Mozilla Firefox, Microsoft Internet Explorer, etc.) on a PC.
The router must be connected to the power supply. The PC to be used for configuration must be connected to an
Ethernet port on the router.
1.2 Configuration
1.2.1 Configuration via web interface
1. The PC must be set to "obtain IP address automatically".
This is the default setting for PCs.
2. Open a browser on the PC.
3. Type the IP address (default: 192.168.0.1) in the address field.
4. For authentication purposes a user name and password must be entered. The default settings for the user name
and password are both "admin", which should be entered in the corresponding fields. For your security, the
password setting can be changed at any time using the "System/User" menu item on the web interface
(see Page 39).
1.2.2 Local IP address is not (longer) known – configuration button
The router is set to "Web access reset" unless you change the default setting. Press the configuration button for at
least 5 seconds using a pointed object. The router web interface can be temporarily readdressed using the default IP
address (192.168.0.1) for the Ethernet (LAN) connection. The configuration settings will not be lost when doing so.
Web access reset
Important note! The router does not supply any IP address to the connected PC via DHCP. You must thus
assign a fixed IP address to the PC (e.g. 192.168.0.2, default gateway 192.168.0.1).
You will now have access to web management using the default access data. Please check the settings for the router IP
address, user name and password and make any changes required.
Factory reset
You changed the setting to "Factory reset" (see Item 1.9.3 "System Configuration/Reset button"). Press the configura-
tion button for at least 5 seconds using a pointed object. The router web interface can be readdressed using the
default IP address (192.168.0.1) for the Ethernet (LAN) connection.
1.2.3 Resetting all parameters on the web interface
Resetting of all router settings to the factory default mode can be carried out via the internal web interface. Please click
on the "Applyv button for the "Reset to Factory Defaults"function in the "System/Configuration Up-/Download"sub-
menu.
To reconfigure the router using the default IP address you will need to use the configuration button on the rear side of
the device. This function depends on the setting you defined in Section 1.9.3 "Reset button".
Important note! All configuration settings will be deleted and reset to the „Factory Defaults“ setting.
User Manual/Web Interface MC-LR/MC-LR-4/MC-LRS/MC-LRS-4 – 01/2018 (FW 2.07.3) 5
Status information on mobile connection and on local Ethernet network.
1.3.1 Network Connections
1.3 Status
Network Connections
Wireless Network
Link VPN connected: Active VPN connection via the network.
Not connected: No packet data connection in the network.
IP Address Allocated IP address from the network.
Netmask Allocated net mask from the network.
DNS Server IP address of the DNS server.
Sec. DNS Server IP address of the alternate DNS server.
RX bytes Sum of received data since last login.
TX bytes Sum of sent data since last login.
Local Network
Link For each LAN-Port Link (1-4 depending of the router type) the connection of the port is shown
Connected: The local Ethernet is active.
Not connected: The local Ethernet is not active.
IP Address Router IP address in the local network.
Netmask Router net mask in the local network.
1.3.2 I/O Status
1.3.4 Routing Table
6MC Technologies GmbH
Status information of I/O interfaces IN and OUT.
Input Signal Event
#1 Low: The signal is low. None: No event has been triggered.
High: The signal is high. E-Mail: An email is being sent.
Output Signal Event
#1 ON: Output active. Based on: Manual ON, Remote Controlled ON,
VPN Service ON, Internet Link ON or Connection lost ON.
Off: Output is not active.
Display of current routing table.
Status display of integrated ComSERVER
1.3.3 ComSERVER (only for MC Router with RS232 or RS485 interface on X1)
See also 1.9.6. ComSERVER
1.4 Local Network
Setup of local IP address and subnet mask for router. Set your parameters and click "Apply". Your parameters have
been saved but not yet applied. To apply the setup, restart the router.
1.4.1 IP Configuration
Display allocation of MAC address to IP address of terminal equipment connected to the local Ethernet.
1.3.5 DHCP Leases
7
User Manual/Web Interface MC-LR/MC-LR-4/MC-LRS/MC-LRS-4 – 01/2018 (FW 2.07.3)
IP Configuration
Current Address
IP Address Current local IP address of the router. If you forget the IP address and would like to configure the
router, follow the instructions under 1.2 "Configuration" on Page 5.
Subnet Mask Current subnet mask.
Type of IP address Static (default): The IP address has been set.
assignment DHCP: The IP address and the subnet mask are obtained dynamically from a connected
DHCP server.
Alias Addresses
IP Adress Alias addresses how the router can be reached alternatively (up to eight other IP addresses).
Subnet Mask Click "New" and add the other IP addresses, as well as the corresponding subnet masks.
An IP address can be allocated automatically to local equipment connected via Ethernet using DHCP (Dynamic Host
Configuration Protocol).
1.4.2 DHCP Server
8MC Technologies GmbH
DHCP Server
DHCP Server Disabled/Enabled: Click "Enabled" if the router should allocate the IP addresses to the connected
terminal equipment as the DHCP server at start-up.
Domain Name Domain name to be broadcast via DHCP.
Lease Time (d,h,m,s) Validity period of allocated network configuration.
Dyn. IP address Disabled/Enabled: Click "Enabled" if an IP address should be dynamically allocated to the connected
terminal equipment in a set range.
Begin IP Range Starting address for the address range from which IP addresses should be distributed.
End IP Range Ending address for the address range from which IP addresses should be distributed.
Static IP address Static allocation of the IP address using the MAC address.
allocation
Client MAC address MAC address of the terminal equipment.
Client IP address IP address of the terminal equipment. Static allocation of the IP addresses should not overlap with the
dynamic IP addresses. An identical IP address should not be used in multiple static allocations.
Data packets from the local network can be defined by static routes using other gateways for alternative routes.
1.4.3 Local Static Routes
9
User Manual/Web Interface MC-LR/MC-LR-4/MC-LRS/MC-LRS-4 – 01/2018 (FW 2.07.3)
Local Static Routes
Network Network in CIDR notation: IP address / Net mask
Example: xxx.xxx.xxx.xxx/yy (x..=IP address; yy=net mask)
Example: yy=24 (number of binary "ones") => net mask = 255.255.255.0
Gateway The gateway how this network can be reached.
10 MC Technologies GmbH
1.5 Wide Area Network
1.5.1 WAN Setup
Settings for use in a WAN (wide area network)
Select the connection type in the "Connection Type"menu and set "Enabled"to "Yes".
• Static Address
• DHCP Client
• PPPoE
Following this, click "Apply".
1.5.1.1 Static address - Preferred setting for operation in local networks
A fixed IP address can be assigned to routers which are operating in an existing network.
IP Address The router’s IP address at the WAN interface.
Subnet Mask Subnet mask.
Default Gateway The gateway’s IP address in the Internet.
DNS Server The DNS server’s IP address.
Sec. DNS Server The IP address of a second DNS server.
Questo manuale è adatto per i seguenti modelli
3
Indice
