McDATA Intrepid 6064 Director Manuale

380 Interlocken Crescent Broomfield, CO 80021-3464

Corporate Headquarters:

800-545-5773

Sales E-mail:

sales@mcdata.com

Web:

www.mcdata.com

Intrepid®6064 Director

Installation and Service Manual

P/N 620-000108-930

REV A

Intrepid® 6064 Director Installation and Service Manual

Record of Revisions and Updates

Revision Date Description

620-000108-100 2/2001 Initial release of the manual

620-000108-200 5/2001 Updates to describe Release 4.1 of the Enter-

prise Fabric Connectivity Manager application.

620-000108-300 6/2001 Additional updates to describe Release 4.1 of

the Enterprise Fabric Connectivity Manager

application.

620-000108-400 11/2001 Updates to describe Release 4.2 of the Enter-

prise Fabric Connectivity Manager application.

620-000108-500 5/2002 Updates to describe change from 1 to 2 giga-

bits/second and Release 6.0 of the Enterprise

Fabric Connectivity Manager application.

620-000108-600 9/2002 Updates to describe Release 6.1 of the Enter-

prise Fabric Connectivity Manager application.

620-000108-700 10/2002 Updates to describe Release 6.2 and 6.3 of the

Enterprise Fabric Connectivity Manager applica-

tion.

620-000108-800 2/2003 Updates to describe Release 7.1 of the Enter-

prise Fabric Connectivity Manager application.

New cover and new format.

620-000108-801 6/2003 Updates to describe new firmware and software

download procedures from McDATA’s home

page.

620-000108-900 8/2003 Revision of the manual to describe the one unit

(1U) rack-mount server and Release 7.2 of the

Enterprise Fabric Connectivity Manager applica-

tion.

Intrepid® 6064 Director Installation and Service Manual

iii

Printed July 2005

Twelfth Edition

No part of this publication may be reproduced or distributed in any form or by any means, or stored in a

database or retrieval system, without the prior written consent of McDATA Corporation.

The information contained in this document is subject to change without notice. McDATA Corporation

assumes no responsibility for any errors that may appear.

All computer software programs, including but not limited to microcode, described in this document are

furnished under a license, and may be used or copied only in accordance with the terms of such license.

McDATA either owns or has the right to license the computer software programs described in this document.

McDATA Corporation retains all rights, title and interest in the computer software programs.

McDATA Corporation makes no warranties, expressed or implied, by operation of law or otherwise, relating

to this document, the products or the computer software programs described herein. McDATA

CORPORATION DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR

A PARTICULAR PURPOSE. In no event shall McDATA Corporation be liable for (a) incidental, indirect,

special, or consequential damages or (b) any damages whatsoever resulting from the loss of use, data or

profits, arising out of this document, even if advised of the possibility of such damages.

620-000108-910 12/2003 Revision of the manual to describe Release

8.0/8.1 of the Enterprise Fabric Connectivity

Manager application. New style for safety

notices. Addition of translated safety notices.

620-000108-920 11/2004 Revision of the manual to describe Release 8.5

of the Enterprise Fabric Connectivity Manager

application, and the 10 Gbps (XPM) port card

and functionality.

620-000108-930 7/2005 Revision of the manual to describe Release 8.7

of the Enterprise Fabric Connectivity Manager

(EFCM) and EFCM Basic Edition application

and functionality.

Intrepid® 6064 Director Installation and Service Manual

Contents

Preface.......................................................................................................................... xvii

Chapter 1 General Information

Director Description .........................................................................1-1

Field-Replaceable Units ...................................................................1-4

Cable Management Assembly.................................................1-5

Front Bezel..................................................................................1-5

CTP2 Card...................................................................................1-5

UPM Card...................................................................................1-7

SFP Transceivers........................................................................1-8

Power Supply.............................................................................1-9

RFI Shield....................................................................................1-9

Power Module Assembly .......................................................1-10

Fan Module...............................................................................1-10

SBAR Assembly .......................................................................1-10

Backplane..................................................................................1-11

Error-Detection, Reporting, and Serviceability Features ..........1-11

Element Manager Status Indicators .............................................1-13

Tools and Test Equipment..............................................................1-14

Tools Supplied with the Director...........................................1-14

Tools Supplied by Service Personnel....................................1-16

Director Management ....................................................................1-17

Chapter 2 Installation Tasks

Factory Defaults................................................................................2-1

Installation Task Summary..............................................................2-3

Task 1: Verify Installation Requirements.......................................2-5

Task 2: Unpack, Inspect, and Install the Ethernet Hub (Optional).

Contents

Intrepid® 6064 Director Installation and Service Manual

Contents

2-6 Unpack and Inspect Ethernet Hub .........................................2-6

Desktop Installation..................................................................2-7

Rack-Mount Installation...........................................................2-8

Task 3: Unpack, Inspect, and Install the Director.........................2-9

Task 4: Configure Director at the EFCM Basic Edition Interface

(Optional).........................................................................................2-12

Configure Director Identification..........................................2-13

Configure Date and Time.......................................................2-14

Configure Parameters.............................................................2-15

Configure Fabric Parameters.................................................2-17

Configure Network Information...........................................2-18

Configure Basic Port Information.........................................2-20

Configure Port BB_Credit ......................................................2-21

Configure Port NPIV...............................................................2-21

Configure SNMP .....................................................................2-22

Enable CLI ................................................................................2-23

Enable or Disable Host Control.............................................2-24

Configure SSL Encryption......................................................2-25

Install PFE Keys (Optional)....................................................2-26

Configure Security...................................................................2-28

Configure Interswitch Links..................................................2-30

Task 5: Configure Director Network Information (Optional) ..2-30

Task 6: Unpack, Inspect, and Install the Management Server..2-34

Task 7: Configure Server Password and Network Addresses..2-36

Configure Password................................................................2-36

Configure Private LAN Addresses.......................................2-37

Configure Public LAN Addresses (Optional).....................2-38

Task 8: Configure Management Server Information .................2-38

Access the Management Server Desktop.............................2-38

Configure Management Server Names................................2-39

Configure Gateway and DNS Server Addresses................2-40

Task 9: Configure Windows Operating System Users ..............2-42

Change Default Administrator Password ...........................2-42

Add a New User......................................................................2-42

Change User Properties..........................................................2-43

Task 10: Set Management Server Date and Time .......................2-44

Task 11: Configure the Call-Home Feature (Optional)..............2-46

Task 12: Assign User Names and Passwords .............................2-47

Task 13: Configure the Director to the Management Application..

2-48

Task 14: Record or Verify Server Restore Information ..............2-49

Task 15: Verify Director-to-Server Communication...................2-50

vii

Contents

Task 16: Configure PFE Key (Optional) ...................................... 2-51

Task 17: Configure Management Server (Optional).................. 2-53

Task 18: Set Director Date and Time............................................ 2-54

Task 19: Configure the Element Manager Application.............2-55

Configure Director Identification.........................................2-56

Configure Director Parameters............................................. 2-56

Configure Fabric Parameters................................................. 2-58

Configure Ports ....................................................................... 2-60

Configure SNMP.....................................................................2-61

Configure Threshold Alerts................................................... 2-62

Enable EFCM Basic Edition and Telnet Access.................. 2-65

Configure, Enable, and Test E-mail Notification ............... 2-65

Configure and Enable Ethernet Events................................ 2-67

Configure, Enable, and Test Call-Home Event Notification ....

2-67

Configure Security.................................................................. 2-68

Configure Interswitch Links.................................................. 2-69

Task 20: Back Up Configuration Data .........................................2-70

Task 21: Cable Fibre Channel Ports ............................................. 2-73

Task 22: Configure Zoning (Optional) ........................................ 2-73

Task 23: Connect Director to a Fabric Element (Optional).......2-74

Task 24: Register with the McDATA Filecenter ......................... 2-75

Chapter 3 Maintenance Analysis Procedures (MAPS)

Factory Defaults ............................................................................... 3-1

Quick Start......................................................................................... 3-2

MAP 0000: Start MAP...................................................................... 3-8

MAP 0100: Power Distribution Analysis.................................... 3-13

MAP 0200: POST Failure Analysis .............................................. 3-16

MAP 0300: Loss of Server Communication................................ 3-20

MAP 0400: FRU Failure Analysis.................................................3-30

MAP 0500: Port Failure or Link Incident Analysis....................3-34

MAP 0600: Fabric or ISL Problem Analysis ............................... 3-48

Chapter4 RepairInformation

Factory Defaults ........................................................................ 4-2

Procedural Notes.......................................................................4-2

Obtaining Log Information............................................................. 4-3

SAN Management Logs........................................................... 4-3

Element Manager Logs ............................................................4-5

EFCM Basic Edition Logs......................................................... 4-8

Intrepid® 6064 Director Installation and Service Manual

viii

Contents

Obtaining Port Diagnostic Information.......................................4-11

Port LED Diagnostics..............................................................4-11

Element Manager Application Diagnostics.........................4-12

EFCM Basic Edition Diagnostics...........................................4-17

Performing Loopback Tests...........................................................4-21

Internal Loopback Test (Element Manager Application)..4-21

External Loopback Test (Element Manager Application) .4-23

Internal Loopback Test (EFCM Basic Edition)....................4-24

External Loopback Test (EFCM Basic Edition) ...................4-26

Blocking and Unblocking Ports....................................................4-27

BlockorUnblockaPortorPortCard(ElementManagerAp-

plication)...................................................................................4-27

Block or Unblock a Port (EFCM Basic Edition)...................4-28

Swapping Ports...............................................................................4-29

Performing Channel Wrap Tests (FICON)..................................4-31

Collecting Maintenance Data........................................................4-32

Collecting Maintenance Data (Element Management Appli-

cation)........................................................................................4-32

Collecting Maintenance Data (EFCM Basic Edition)..........4-33

Powering the Director On or Off..................................................4-34

Power-On Procedure ..............................................................4-34

Power-Off Procedure..............................................................4-35

Setting the Director Online or Offline..........................................4-36

Set Online or Offline (Element Manager Application) ......4-36

Set Online or Offline (EFCM Basic Edition) ........................4-37

IML, IPL, or Reset the Director.....................................................4-38

IML the Director (CTP Front Panel) .....................................4-38

IPL the Director (Element Manager Application) ..............4-39

Reset the Director (CTP Front Panel) ..................................4-39

Cleaning Fiber-Optic Components ..............................................4-40

Downloading Director Firmware and Software ........................4-41

Download Firmware and Software from Filecenter ..........4-42

Download Firmware and Software to Director (Element

Manger Application)...............................................................4-44

Download Firmware and Software to Director (EFCM Basic

Edition)......................................................................................4-46

Installing or Upgrading Software.................................................4-47

Managing Configuration Data......................................................4-50

Back Up Configuration (Element Manager Application)..4-50

Restore Configuration (Element Manager Application)....4-50

Reset Configuration Data (Element Manager Application).....

4-51

Back Up Configuration (EFCM Basic Edition)....................4-54

Contents

Restore Configuration (EFCM Basic Edition)..................... 4-54

Reset Configuration Data (EFCM Basic Edition) ............... 4-55

Chapter 5 Removal and Replacement Procedures (RRPs)

Factory Defaults ........................................................................ 5-1

Procedural Notes....................................................................... 5-2

Removing and Replacing FRUs..................................................... 5-3

ESD Information........................................................................ 5-3

Concurrent FRUs....................................................................... 5-5

Nonconcurrent FRUs................................................................ 5-5

RRP: Cable Management Assembly..............................................5-6

RRP: CTP2 Card ............................................................................... 5-8

RRP: Port Module Card (UPM).................................................... 5-13

RRP: Optical Transceiver (SFP) ....................................................5-18

RRP: Filler Blank (UPM)................................................................5-22

RRP: Power Supply........................................................................ 5-24

RRP: RFI Shield............................................................................... 5-28

RRP: SBAR Assembly.................................................................... 5-29

RRP: Fan Module ...........................................................................5-33

RRP: Power Module Assembly.................................................... 5-37

RRP: Backplane............................................................................... 5-41

Chapter 6 Illustrated Parts Breakdown

Front-Accessible FRUs..................................................................... 6-2

Rear-Accessible FRUs...................................................................... 6-4

Miscellaneous Parts ......................................................................... 6-6

Power Cords and Receptacles ........................................................ 6-8

Appendix A Event Code Tables

System Events (000 through 199) .................................................A-3

Power Supply Events (200 through 299) ...................................A-25

Fan Module Events (300 through 399) ......................................A-29

CTP/CTP2 Card Events (400 through 499) .............................. A-37

Port Card (UPM) Events (500 through 599) .............................. A-50

SBAR Events (600 through 699) .................................................A-62

Thermal Events (800 through 899) .............................................A-66

Appendix B Director Specifications

Physical Characteristics............................................................B-1

Shipping and Storage Environment.......................................B-2

Intrepid® 6064 Director Installation and Service Manual

Contents

Operating Environment........................................................... B-2

Fabricenter Equipment Cabinet Service Clearances............ B-3

Appendix C Management Server and Ethernet Hub

Management Server Description...................................................C-1

Management Server Specifications........................................C-2

Ethernet Hub Description ..............................................................C-2

Appendix D Restore Management Server

Requirements ...................................................................................D-1

Restore Management Server Procedure ......................................D-2

Appendix E Safety Notices (Multi-Lingual Translations)

Glossary ........................................................................................................................g-1

Index ................................................................................................................................i-1

Indice

Altri manuali McDATA Server

McDATA

McDATA 1U Server Manuale

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente