MEGAlink ML2000 Manuale utente
20
20
Megalink AS
v20.11
User manual for ML2000
Default Course of Fire – Practice mode
User manual for ML2000
28.01.2020 Default course of fire - Practice 2
User manual for ML2000
Default Course of Fire – Practice mode
Table of contents
1
General information ..................................................................................................................... 3
1.1
Requirements ....................................................................................................................... 3
2
Config first time use .................................................................................................................. 4
3
Course of fire for practice mode Menu .................................................................................. 5
3.1
Limitations for DU2 Monochrome monitors .................................................................... 6
User manual for ML2000
28.01.2020 Default course of fire - Practice 3
1 General information
This document describes how to set up a default course of fire for practice on Megalink monitors.
The monitors will enable the default course of fire when exiting from an event on MLRange.
The config is done in a new web user interface shown in your web browser.
1.1 Requirements
MLRange and monitors must have version 20.10 or newer.
The web browser Google Chrome must be installed. Download from
www.google.com/chrome.
Windows 7 or newer must be used as OS.
User manual for ML2000
28.01.2020 Default course of fire - Practice 4
2 Config – first time use
To get to the menu for default course of fire on monitors “web remote control” must be activated in
MLRange.
Select Setup Web Remote Control
Select Enable remote control
Make sure to remember the passcode. You will need it at first attempt to log in to the web
interface.
Save by pressing OK.
User manual for ML2000
28.01.2020 Default course of fire - Practice 5
3 Course of fire for ractice mode – Menu
In MLRange select Setup Course of fire practice mode. Click on Yes to open the menu in a
web browser.
The browser will open and you will be asked to sign in. Use the passcode selected in MLRange.
After signing in this menu will be available:
A. The list at the left shows all options that can be select in the course of fire menu on the
monitor.
A B
C
D
E
F
User manual for ML2000
28.01.2020 Default course of fire - Practice 6
B. Press the Send to monitors button to set the selected course of fire on the monitors.
C. If the Save as default option is checked the selected course of fire will be saved as default
on the monitors. When switching to practice mode from MLRange, this course of fire will
be selected on the monitors.
D. Select if the course of fire should be set on all or selected monitors.
E. The button Remove default cof from monitor will delete the saved default course of fire.
The monitor will select the last used practice mode score card when switching to practice
mode.
F. The selected course of fire can be saved by pressing the Save current config as favorite
button. Unlimited number of favorites can be saved.
The first and last parameters are also saved. This makes it easy to switch between different
course of fires in practice mode.
3.1 Limitations for DU2 – Monochrome monitors
The older monochrome monitors (DU2) can not save the default course of fire locally. They will
therefore use the config saved last as default. This course of fire is sent from MLRange when
switching to practice mode.
Altri manuali per ML2000
10
Indice
Altri manuali MEGAlink Strumento di misura
