Meiji Techno PKL Manuale utente

Model PKL

Stereo Microscope Incident & Transmitted Light

LED Pole Stand

Instruction Manual

Table of Contents

1.0 Introduction

1.1 Product Features

1.2 General Safety Guidelines

1.3 Warning/Caution symbols used in this manual

1.4 Intended Product Use Statement

1.5 Product Safety Information

1.6 Warranty Notes

2.0 The Stand and its Components

2.1 Set Up

3.0 Operation

3.1 Incident Light Operation – Brightfield

3.2 Transmitted Light Operation – Brightfield

4.0 Maintenance and Cleaning

5.0 Troubleshooting

5.1 Replacing the mains fuse

6.0 Storage

7.0 Accessories and Replacements Parts

8.0 Physical Dimensions

Model PKL Microscope Pole Stand

1. Introduction

The Meiji Techno Model PKL Microscope Pole Stand has a low profile ergonomic shaped

design that is very comfortable to use and offers excellent stability. All of the controls are

ergonomically positioned to provide comfort and extended ease of use for the operator. An

adjustable integrated LED vertical illuminator with a variable intensity control and

automatic voltage sensing power supply provides excellent specimen illumination and

contrast. The PKL is designed to meet your most diverse needs for stereo microscopy.

1.1 Model PKL Features

•CAD Designed

•Low Profile Compact Footprint

•Low Positioned Ergonomic Controls

•Smooth Operating Course Focus Block with LED Incident Illuminator

•Rugged Cast Alloy Construction

•Brightfield and Optional Polarized Light Observation Modes

•Integrated LED Transmitted Light Illumination System

•Wide Variety of Viewing Heads Available

•Automatic Voltage Sensing Power Supply with detachable power cord

•Wide Range of Accessories

1.2 General Safety Guidelines

Meiji Techno products are designed for safe operation under normal operating conditions.

The instrument and accessories described in this manual have been built and tested

according to industry safety standards for electronic laboratory instruments. Incorrect

usage or non-conformance to operating instructions can cause personal injury or damage

to equipment or property.

1.3 Warning/Caution Symbols Used in this Manual

You must be aware of all safety issues when you install and operate this microscope

system. Several warning and caution symbols are listed below. These symbols are used

throughout this instruction manual. For your safety, be sure to follow all instructions

associated with the symbols listed below.

Possible electrical shock hazard exists

Disregarding instructions marked with this symbol may lead to serious

injury or property damage.

1.4 Intended Product Use

Product Disclaimer:This product is designed and intended for use only as a stereo

microscope fixturing system. Modifying this product in any way for use in any situation

other than the original and intended product design will automatically void the warranty.

In no event shall Meiji Techno be liable to any person for any incidental, indirect or

consequential damages, arising out of or in connection with the use or performance of a

modified or altered product.

1.5 Product Safety Information

This microscope stand is not intended to be used in the immediate vicinity of

water or a water outlet or placed in any location where water may penetrate the instrument.

Water penetration may result in electrical shock or death. Choose only a suitable

environment for your microscope stand.

Do not subject any microscope system to extreme temperature fluctuations.

Disassembly of the instrument may result in electrical shock, injury or death, equipment

damage, loss of warranty coverage or may create other potential hazardous consequences.

Always turn off the power switch and disconnect the cord from the power supply when

replacing fuses, doing general maintenance or cleaning of the stand.

DO NOT OPERATE UNLESS THE UNIT IS PROPERLY GROUNDED!

Use only the specified power cord in a well grounded socket. Do not use in an

ungrounded power receptacle or in cases where there is a break in the ground conductor

or damage to the electrical wiring.

Only fuses of the specified type and rating (1 amp 250V FB) are to be used as

replacements. Switch off the power and disconnect the power cord before replacing fuses.

Use of a non-compliant fuse may result in electrical shock or severe damage your

equipment.

Modifying the product in any way or unauthorized attempts to disassemble or use the

instrument for applications other then its intended design will automatically void the

warranty.

1.6 Warranty Notes

Meiji Techno warrants this product against defects in material and/or workmanship for the life of

the instrument from the date of the original purchase to the original purchaser. Meiji Techno will

repair or replace, at its option, any instrument which under normal conditions of use and service

proves to be defective in material or workmanship. No charge will be made for labor or materials

with respect to defects covered by this warranty, provided all repair work is done by Meiji Techno.

This warranty does not cover expenses incurred in the removal or reinstallation of any products,

whether or not proven defective. Replacement or repairs furnished under this warranty are subject

to the same terms and conditions of the original warranty. This warranty supersedes any other

warranty and is subject to the following terms and conditions:

WARRANTY

Warranty of Meiji Techno’s product extends to the original purchaser of the product and

is not transferable.

WARRANTY DURATION

Meiji Techno warrants this product against defects in material and/or workmanship for

the life of the instrument from the date of original purchase to the original purchaser. The

electrical warranty is one year.

OWNER’S REGISTRATION CARD

Return of the owner’s registration card by the original purchaser within ten (10) days

after the original purchase is a condition precedent to coverage under this warranty. Meiji

Techno will at its option accept written proof of purchase from the original owner in lieu

of a product registration card.

EXCLUSIONS AND LIMITATIONS

Specifically excluded from this warranty are failures caused by abuse, neglect, misuse,

improper operation, normal wear, accident, improper maintenance or modifications of

ANY type. This warranty does not cover repair or replacement where normal use has

exhausted the life of a part or instrument. All mechanical devices need periodic parts

replacement and service to perform well. Service life of an instrument is dependent upon

the care it receives and the conditions under which it has to operate. In no event shall

Meiji Techno be liable for incidental or consequential damages.

SERVICE

To obtain service under this warranty, please contact Meiji Techno directly and ask for

the Product Service Department. State the nature of the problem, model and serial

number of the instrument, date of purchase and location and name of the distributor the

instrument was purchased from. After verification of warranty registration, Meiji Techno

will issue a return authorization number. Customer may then return the product postage

prepaid and insured to the authorized repair facility.

In most instances, requests for warranty service will be performed in a prompt and

routine manner and merchandise will be returned in a reasonable period of time or at

Meiji Techno’s convenience. In some cases, requests for warranty service are received

which are not justified. In these cases, Meiji Techno will provide an explanation for non-

warranty action.

WARRANTY TERMS

The terms of this warranty may not be varied by any person, whether or not purporting to

represent or act on behalf of Meiji Techno. The limited lifetime warranty provided is in

lieu of any and all warranties, expressed or implied, whether for merchantability or

fitness for a particular purpose or otherwise. Liability for consequential damages under

any, and all warranties are excluded to the extent exclusions are permitted by law. This

warranty gives you specific legal rights and you may also have other rights which vary

from state to state. This warranty sets forth the customer’s exclusive remedy, with respect

to defective products. This limited warranty shall become null and void in the event of a

violation of the provisions of this limited warranty.

2.0 The Stand and its Components

The image below designates the main components of the PKL Stereo Microscope Stand.

2.1 Set Up

Microscope work should be performed in a room with as little dust as practically

possible.

Keep your instruments away from solvents, chemical fumes and excessive humidity.

Also try to avoid big swings in ambient temperature, direct sunlight and vibration as they

can affect measurements and your instrument performance.

Acceptable Operating Ambient Conditions

Temperature: 10 - 36°C (50 – 96.8°F)

Relative Humidity: 0 – 80% up to 30°C (86°F)

1. As a first step, remove all components from the shipping container and remove the

packing materials. Save the container and packing in a dry location.

2. Place the microscope stand on a stable work surface.

3. Loosen the clamp screw on the PKL focus block and install the microscope head.

4. Install the two eyepieces by sliding them into the head.

5. Connect the power cable from power socket on the rear of the stand to a known

grounded outlet.

At this point, your stereo microscope is ready to go to work.

The mains power cord should only be plugged into a known grounded outlet.

Contact your facilities technician if you are unsure of your mains outlet status. A simple

outlet tester can be used to verify correct outlet polarity and the presence of a grounded

circuit.

3.0 Operation

Once the microscope has been setup in its working location with all of the components

correctly installed, it is ready for use.

Your Meiji Techno PKL Microscope Stand is a precision instrument designed to last a

lifetime. Always handle your equipment with care and avoid abrupt motion, vibration and

shock.

Always disconnect the power cord from the back of the stand when not being used, when

cleaning your instrument or when making any repairs.

Avoid Dismantling

Never attempt to dismantle the stand. This will void your warranty and could possibly

lead to the stand no longer working.

3.1 Incident Light Operation – Brightfield

1. First, set your interpupillary distance on the microscope eyetubes by pulling them

apart or pushing them closer together to fit your eyes. When set correctly, one will

see one uniform round field of view.

2. Turn on the power switch to the stand. Adjust the brightness desired with the

variable brightness control knob on the right hand side of the stand.

3. Parfocal your microscope. For help on how to parfocal your stereo microscope,

visit our website: http://www.meijitechno.com/instructions/parfocal.htm

4. Place your specimen on the stage and by using the focus knobs, adjust your

specimen into focus.

3.2 Transmitted Light Operation – Brightfield

1. First, set your interpupillary distance on the microscope eyetubes by pulling them

apart or pushing them closer together to fit your eyes. When set correctly, one will

see one uniform round field of view.

2. Turn on the power switch to the stand. Adjust the brightness desired with the

variable brightness control knob on the left hand side of the stand.

3. Parfocal your microscope. For help on how to parfocal your stereo microscope,

visit our website: http://www.meijitechno.com/instructions/parfocal.htm

4. Place your specimen on the stage and by using the focus knobs, adjust your

specimen into focus.

4.0 Maintenance and Cleaning

•Disconnect the power cord on your equipment prior to performing cleaning,

maintenance or repair.

•Keep electrical components away from moisture or humidity.

•In warm humid climates, take special care to prevent your equipment from

exposure to fungal growth.

•Clean the microscope after each use. Keeping your microscope clean will insure

its proper operation over its lifetime.

Dust Protection

Be sure to use the supplied dust cover with your microscope after each work session.

Cleaning of Painted Surfaces

Use a soft brush or lint-free cotton cloth to removed dust and loose particles.

Tough dirt can be removed with water and a mild detergent.

NEVER USE ACETONE OR OTHER HARSH CHEMICALS.

Indice

Altri manuali Meiji Techno Microscopio

Meiji Techno

Meiji Techno MC Series Manuale utente

Meiji Techno

Meiji Techno ML9000 Series Manuale utente

Meiji Techno

Meiji Techno MT-16 Manuale utente

Meiji Techno

Meiji Techno EM-20 Series Manuale utente

Meiji Techno

Meiji Techno TC5000 Series Manuale utente

Meiji Techno

Meiji Techno MT-50 Series Manuale utente

Meiji Techno

Meiji Techno IM700 Series Manuale utente

Meiji Techno

Meiji Techno MT6000 Series Manuale utente

Meiji Techno

Meiji Techno TM200 Series Manuale utente

Meiji Techno

Meiji Techno ML5000 Series Manuale utente

Meiji Techno

Meiji Techno MT-420 Series Manuale utente

Meiji Techno

Meiji Techno EM-22 Manuale utente

Meiji Techno

Meiji Techno TC5000 Series Manuale utente

Meiji Techno

Meiji Techno MT7000 series Manuale utente

Meiji Techno

Meiji Techno MT9000 Series Manuale utente

Meiji Techno

Meiji Techno EMZ-1 Manuale utente

Meiji Techno

Meiji Techno EMZ-1 Manuale utente

Meiji Techno

Meiji Techno MX5000 series Manuale utente

Meiji Techno

Meiji Techno MT5500 Manuale utente

Meiji Techno

Meiji Techno ML7000 Series Manuale utente

Meiji Techno

Meiji Techno EMF Series Manuale utente

Meiji Techno

Meiji Techno MX4000 series Manuale utente

Meiji Techno

Meiji Techno MT6200ECW Manuale utente

Meiji Techno

Meiji Techno EM-30 Series Manuale utente

Manuali Microscopio popolari di altre marche

Thermo Scientific

Thermo Scientific Nicolet iN10 Guida

National

National DC3-163 Manuale utente

KERN Optics

KERN Optics OPE-1 Manuale utente

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Manuale utente

Prior

Prior Lux POL Manuale utente

Opitec

Opitec Smartscoop 115615 Manuale utente

KERN

KERN OPO-1 Manuale utente

Topcon

Topcon SP-1P Manuale utente

Motic

Motic PA43 Manuale utente

Leica

Leica DVM5000 Guida utente

MshOt

MshOt MZ62 Manuale utente

KERN Optics

KERN Optics OZR-5 Manuale utente

VWR

VWR VisiScope 384 Series Manuale utente

Nikon

Nikon ECLIPSE E200 POL Manuale utente

Leica

Leica DI C800 Manuale

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuale utente

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuale utente

Olympus

Olympus SZ61 Manuale utente