Messoa SCB267-HN5 Manuale utente

700 TV lines

High Resolution Camera

Instructions Manual

Before attempting to connect or operate this product, please read these instructions

carefully and save this manual for future use.

ZEIM-4000491G 267 A.2

CONTENT

1. Intro ----------------------------------------------------------------------------4

2. Part Names and Location ------------------------------------------------------5

3. OSD Menu ----------------------------------------------------------------------6

4. OSD Menu Setting -------------------------------------------------------------7

4.1 LENS ----------------------------------------------------------------------8

4.2 SHUTTER/AGC------------------------------------------------------------8

4.3 WHITE BAL ---------------------------------------------------------------9

4.4 Backlight---------------------------------------------------------------- 10

4.5 PICT ADJUST ----------------------------------------------------------- 10

4.6 ATR --------------------------------------------------------------------- 10

4.7 Motion Det-------------------------------------------------------------- 10

4.8 Privacy------------------------------------------------------------------ 11

4.9 Day/Night--------------------------------------------------------------- 11

4.10 NR --------------------------------------------------------------------- 12

4.11 Camera ID ------------------------------------------------------------ 12

4.12 SYNC ------------------------------------------------------------------ 12

4.13 Language-------------------------------------------------------------- 12

4.14 Camera Reset --------------------------------------------------------- 12

4.15 Save All --------------------------------------------------------------- 12

Specication ----------------------------------------------------------------- 13

IMPORTANT SAFETY INSTRUCTIONS

The equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to Part 15 of the FCC Rules. The limits are designed to

provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and

can radiate frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference, in which case users will be required to correct the interference at

their own expense.

FCC Caution:

To ensure continued compliance, use only shielded interface cables when

connecting to computer or peripheral devices. Any changes or modications not

expressly approved by the party responsible for compliance could void the user’s

authority to operation this equipment.

Installation and serving should be performed only by qualified and experienced

technicians to conform to all local codes and to maintain your warranty.

Operating Notes:

• For dual voltage model: Connect to DC12V or AC 24V power adapter.

• For high voltage model: Connect to AC 90V~260V power source.

Operating Conditions

• Avoid viewing very bright objects (example, light fixtures) for extended

periods.

• Avoid operating or storing the unit in the following locations:

- Extremely humid, dusty, hot/cold environments (where the operating

temperature is outside the recommended range of 14°F to 122°F [-10°C

to +50°C]

- Close to sources of powerful radio or TV transmitters

- Close to uorescent lamps or objects reecting light

- Under unstable light sources (may cause ickering)

To reduce the risk of re or electric shock,

do not expose the product to rain or moisture.

WARNING!

INTRODUCTION

The box camera is ideal for indoor installation in commercial and residential

environment.

Before You Begin:

Please read this guide carefully before you install the box camera. Keep this guide for

future reference.

Package Contents:

Check that the items received match those listed on the order form and packing slip.

The dome camera packing box include, in addition to this Install Guide:

• One instruction manual

• One fully assembled camera

• One Lens mounting cap

• One Hexagonal wrench

If any parts are missing or damaged, contact the dealer you purchased the camera.

PART NAMES AND LOCATIONS

53.5mm (2.10")

129mm (5.07")

63.3mm (2.49")

Figure 2-1 Dual-voltage model

Figure 2-2 High-voltage model

53.5mm (2.10")

129mm (5.07")

63.3mm (2.49")

(1) Lens mount

For the installation of CS Mount lenses only.

(2) Back Focus adjustment :

A.Back Focus Screw :

Loosen this screw before you use the Focus

Adjustment. To maintain the correct focus

afterwards, ensure that it is tightened.

B.Focus Adjustment :

Adjust this dial to obtain correct back-focus

whilst using a CS mount lens.

(3) DC IRIS connector

(4) OSD joystick control

Press the OSD joystick control straight

down:

• For two seconds to enter the Main

menu.

• To enter a screen or to select a

submenu option. A selected menu

item blinks.

(5) Terminal Block

The camera will be forced to BW mode

with external contact. This function is

supported ICR DN camera only.

When forced to BW mode, the OSD

setting of DAY/NIGHT will be changed

to BW mode. But if cancelled external

contact, the OSD setting of DAY/NIGHT

will be forced to set CL mode.

(6) Video Output Terminal

BNC: Used to give out the video signal.

Connected to the video input terminal

of a monitor, switcher, etc. (to be

terminated with 75 ohm impedance)

(7) Power Connector

Connect to the respective power source.

• For dual-voltage model: Connect to

DC12V or AC 24V power adapter.

• For high-voltage model: Connect to

AC 90V~260V power source.

WARNING: This apparatus must be

EARTHED.

(8) Power Indicator

Light is on when power is applied.

(9) Tripod Stand

Application for mounting the camera onto

the camera holder. Effective for general

camera tripods.

OSD Setup Menu

Set up menu

Default set Menu

Lens

AUTO AUTO/Manual

Shutter/AGC

AUTO AUTO (High Luminance, Low Luminance)/

Manual (Mode, Shutter, AGC)

WHITE BAL

ATW ATW/Push Lock/User1/User2/Anti CR/Manual

Backlight

OFF OFF/BLC/HLC

Pic Adjust

Mirror, Brightness, Contrast, Sharpness, Hue,

Gain

ATR

OFF OFF/ON (Luminance, Contrast)

Motion Det

OFF OFF/ON (Detect Sense, Block DISP, Motion Area,

Area Sel)

Privacy

OFF OFF/ON (Area Sel, Color, Transp, Mosaic)

Day/Night

AUTO AUTO/BW/Color

OFF

NR Mode (Off, Y, C)

Y Level

C Level

Camera ID

OFF OFF/ON

SYNC

INT/LL

Language

English English, Japanese, German, French, Russian,

Portuguese, Spanish, Simplied Chinese

Camera Reset

Exit

Save All

MENU Setting

Entering OSD Menu

Hold down on the joystick to open the Main menu. Use the UP/DOWN functions of

the joystick to move the cursor to the item you want to modify. A selected menu item

will be highlighted.

Press UP: Press to move the cursor up.

Press Down: Press to move the cursor down.

Enter button: Hold down on the joystick to enter the selected item or change the

settings of the selected item.

Press Right: Press it to change the settings of the selected item.

Press Left: Press it to change the settings of teh selected item.

NOTE: When an item is selected, it will be highlighted.

After all the settings have been satised, move the cursor to the "Save All" item and

press the enter button. Then move the cursor to the "EXIT" item and press the enter

button to exit OSD setup menu.

You can also restore the settings to factory default by moving the cursor to the

"CAMERA RESET" item and then pressing the Enter button. Then move the cursor to

the "Save All" item and press the Enter button.

4.OSD Menu Settings

MENU SETTING

Figure 4-1 Main menu

4.1 Lens

Select Auto or Manual lens function. The default setting is AUTO(Auto Iris lens).

Move the joystick control LEFT or RIGHT to select Auto or Manual Lens. Enter the

AUTO submenu as shown in the gure. Move the joystick control UP or DOWN to

open, close, or set IRIS to auto mode. Move the joystick control UP or DOWN to

adjust the DC Iris Lens convergence speed.

4.2 SHUTTER/AGC

Set Shutter speed/AGC(Auto Gain Control) function. The default setting is AUTO.

Move the joystick control LEFT or RIGHT to select AUTO or MANUAL.

SUGGESTED USE:

DC Lens: When use DC lens, it is recommended to set SHUTTER/AGC to AUTO mode.

Enter the AUTO submenu as shown in the gure. Move the joystick control UP or

DOWN to adjust HIGH LUMINANCE MODE to AUTO IRIS.

Manual Lens: When use MANUAL lens, it is recommended to set SHUTTER/AGC to

AUTO mode. Enter the AUTO submenu as shown in the gure. Move the joystick

control UP or DOWN to adjust HIGH LUMINANCE MODE and LOW LUMINANCE setting.

LENS AUTO

SHUTTER/AGC AUTO

WHITE BAL ATW

BACKLIGHT OFF

PICT ADJUST

ATR OFF

MOTION DET OFF

EXIT SAVE ALL

PRIVACY OFF

DAY/NIGHT AUTO

CAMERA ID OFF

SYNC INT

LANGUAGE ENGLISH

CAMERA RESET

BACK

EXIT SAVE ALL

TYPE DC

MODE OPEN

SPEED 046

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Messoa Telecamera di sicurezza

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente