Metrologic MS 1690 Focus Series Manuale utente

METROLOGIC INSTRUMENTS, INC.

MS1690 Focus™

Area Imaging Bar Code Scanner

Supplemental Configuration Guide

work may be reproduced, transmitted, or stored in any form or by any means

without prior written consent, except by reviewer, who may quote brief

passages in a review, or provided for in the Copyright Act of 1976.

Products and brand names mentioned in this document are trademarks of

their respective companies.

TABLE OF CONTENTS

SCANNER OPERATION

Presentation and Trigger Modes....................................................................... 1

Presentation Mode ........................................................................................ 1

Multi-Try Trigger Mode .................................................................................. 1

Continuous Trigger Mode.............................................................................. 1

Single Trigger Mode ...................................................................................... 2

Omnidirectional and/or Linear Scanner Modes................................................. 3

Linear Illumination Aiming................................................................................. 5

Data Output ...................................................................................................... 5

Character Suppression ..................................................................................... 6

Same Symbol Timeouts.................................................................................... 8

CODE TYPES AND DECODE RULES

Data Matrix ....................................................................................................... 9

QR Code......................................................................................................... 10

MaxiCode ....................................................................................................... 10

Aztec............................................................................................................... 11

Postal.............................................................................................................. 11

Codablock Options ......................................................................................... 15

PDF Options ................................................................................................... 15

RS232

Software Handshaking.................................................................................... 16

Multifunctional USB/IBM Interface .................................................................. 16

INTERFACES

Additional Interfaces ....................................................................................... 17

ENTER/EXIT CONFIGURATION MODE BAR CODE....................................................... 20

SCANNER OPERATION

Presentation and Trigger Modes

The MS1690 has four configurable modes for scanning: the presentation mode,

the multi-try trigger Mode, the continuous trigger mode and the single-trigger

mode. These modes can be configured separately for in-stand and out-of-stand

scanner operation.

Presentation Mode

Out-of-Stand

* Presentation Mode

In-Stand

³418304

³420204

* Multi-Try Trigger Mode

Out-of-Stand

Multi-Try Trigger Mode

In-Stand

³418324

³420224

Continuous Trigger Mode

Out-of-Stand

Continuous Trigger Mode

In-Stand

³418354

³420254

* Factory Default Configuration

SCANNER OPERATION

Presentation and Trigger Modes

Single Trigger Mode

Out-of-Stand

Single Trigger Mode

In-Stand

³418344

³420244

Set In-Stand Mode to Match

Out-of Stand Mode

³4202154

* Factory Default Configuration

SCANNER OPERATION

Omnidirectional and/or Linear Scanner Modes

The MS1690 can be configured to operate as an omnidirectional scanner, or a

linear scanner, or a combination of both. The scanner can be configured to

these modes separately for trigger and presentation operations.

When configured to operate as an omnidirectional scanner, all 1D and 2D

barcodes are scanned omnidirectionally (except Code 128 scanner configuration

labels, which have to be linearly aligned for successful scanning).

When configured to operate as a linear scanner, the 1D barcodes have to be

linearly aligned for successful scanning while the 2D barcodes cannot be

scanned.

When configured to operate as both the linear and omnidirectional scanner, the

1D barcodes have to be linearly aligned for successful scanning while the 2D

barcodes are scanned omnidirectionally.

By default, the scanner is configured to omnidirectional scanning for trigger and

presentation operations.

Enable Linear Only

in Trigger Operations

Disable Linear Only

in Trigger Operations

³120213

³120203

Enable 1D Linear Only

in Trigger Operations

Disable 1D Linear Only

in Trigger Operations

³120212

³120202

SCANNER OPERATION

Omnidirectional and/or Linear Scanner Modes

Enable Linear Only

in Presentation Operations

Disable Linear Only

in Presentation Operations

³120211

³120201

Enable 1D Linear Only

in Presentation Operations

Disable 1D Linear Only

in Presentation Operations

³120210

³120200

SCANNER OPERATION

Linear Illumination Aiming

The MS1690 can be configured to use the linear illumination as an aiming

means, separately for trigger and presentation operations.

* Enable Aiming in

Trigger Operations

Disable Aiming in

Trigger Operations

³124000

³124010

* Enable Aiming in

Presentation Operations

Disable Aiming in

Presentation Operations

³124011

³124001

Data Output

The MS1690 can be configured to have the data output disabled.

* Enable Data Output Disable Data Output

³121205

³121215

* Factory Default Configuration

SCANNER OPERATION

Character Suppression

Enable the

Suppression of 1 Character

* Disable the

Suppression of 1 Character

³115111

³115101

To suppress 1 character:

1. Scan the Enter/Exit Configuration Mode bar code, on page 20.

2. Scan the Enable the Suppression of 1 Character bar code.

3. Scan the Character 1 bar code (below left).

4. Scan the three code bytes that represent the character to be

suppressed, on page 7.

5. Scan the Enter/Exit Configuration Mode bar code, on page 20.

Enable the

Suppression of 2 Characters

* Disable the

Suppression of 2 Characters

³115112

³115102

To suppress 2 characters:

1. Scan the Enter/Exit Configuration Mode bar code, on page 20.

2. Scan the Enable the Suppression of 2 Character bar code above.

3. Scan the Character 1 bar code (below left).

4. Scan the three code bytes, on page 7, that represent the

1st character to be suppressed.

5. Scan the Character 2 bar code (below right).

6. Scan the three code bytes, on page 7, that represent the

2nd character to be suppressed.

7. Scan the Enter/Exit Configuration Mode bar code, on page 20.

Character 1 Character 2

³915200

³915300

Altri manuali per MS 1690 Focus Series

Indice

Altri manuali Metrologic Lettore di codici a barre

Metrologic

Metrologic MS9500 Voyager Series Manuale utente

Metrologic

Metrologic MS7620 Manuale utente

Metrologic

Metrologic IS3480 QuantumE Manuale utente

Metrologic

Metrologic Cubit MS6520 Series Manuale utente

Metrologic

Metrologic MLPN 2159 Manuale utente

Metrologic

Metrologic MS770 Manuale utente

Metrologic

Metrologic Cubit MS6520 Series Manuale utente

Metrologic

Metrologic MS9500 Voyager Series Manuale utente

Metrologic

Metrologic 1070 Manuale utente

Metrologic

Metrologic TwinScan IS220 Manuale utente

Metrologic

Metrologic ScanQuest IS4110 Manuale utente

Metrologic

Metrologic StratosS MS2222 Manuale utente

Metrologic

Metrologic Fusion MS3780 Manuale utente

Metrologic

Metrologic MK1650-62B14 - Metrologic IS1650 - Wired Stationary Barcode... Manuale utente

Metrologic

Metrologic MS860i Mini-Slot Manuale utente

Metrologic

Metrologic MS7120 Orbit Manuale utente

Metrologic

Metrologic MH941 Manuale utente

Metrologic

Metrologic S4800 microQuest Series Manuale utente

Metrologic

Metrologic MK9535-79C5M38 - Metrologic MS9535 VoyagerBT Manuale utente

Metrologic

Metrologic IS3480 QuantumE Manuale utente

Metrologic

Metrologic MS9590 VOYAGERGS series Manuale utente

Metrologic

Metrologic MS9500 Voyager Series Manuale utente

Metrologic

Metrologic MK5145-31A38 Manuale utente

Metrologic

Metrologic MS6720 Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente