Metrologic MS6130 Manuale utente

METROLOGIC INSTRUMENTS, INC.

MS6130 Hand Held Laser Scanner

and MX003 Scanner Interfaces

Installation and User’s Guide

LOCATIONS

CORPORATE HEADQUARTERS ....................................................................................................................................

North America Metrologic Instruments, Inc. Customer Service: 1-800-ID-METRO

90 Coles Road Tel: 856-228-8100

Blackwood, NJ 08012-4683 Fax: 856-228-6673

Email: info@metrologic.com

Internet: www.metrologic.com

EUROPEAN HEADQUARTERS

Germany, Metrologic Instruments GmbH Tel: +49 89 89019 0

Middle East and Africa Dornierstrasse 2 Fax: +49 89 89019 200

82178 Puchheim b. Email: [email protected]gic.com

Munich, Germany Germany Email:

[email protected]gic.com

Spain Metrologic Eria lbérica SL Tel: +34 913 272 400

Julián Camarillo 29, D-1 Fax: +34 913 273 829

Edificio Diapasón Email: [email protected].com

28037 Madrid

Italy Metrologic Instruments Italia srl Tel: +39 0 51 6511978

Via Emilia 70 Fax: +39 0 51 6521337

40064 Ozzano dell’Emilia (BO) Email: info@it.metrologic.com

France Metrologic Eria France SA Tel: +33 (0) 1 48.63.78.78

69 Rue de la Belle Etoile Fax: +33 (0) 1 48.63.24.94

ZI Paris Nord II, BP 50057 Email: [email protected]etrologic.com

95947 – ROISSY CDG CEDEX

United Kingdom Metrologic Instruments UK Limited Tel: +44 (0) 1256 365900

58 Tempus Business Centre Fax: +44 (0) 1256 365955

Kingsclere Road, Basingstoke Email: [email protected].com

Hampshire RG21 6XG

ASIA

Singapore Metrologic Asia (Pte) Ltd Tel: 65-6842-7155

No. 8 Kaki Bukit Place Fax: 65-6842-7166

4th Floor Email: [email protected]gic.com

Singapore 416186

ChinaMetro (Suzhou) Technologies Co., Ltd. Tel:86-512-62572511

221 Xing HaiStreet Fax:86-512-62571517

Suzhou Industrial Park Email: [email protected]gic.com

Suzhou, China

215021

Japan Metrologic Japan Co., Ltd. Tel: 81-03-3839-8511

Matsunoya Building, 6 Floor Fax: 81-03-3839-8519

3-14-8 Higashiueno Email: [email protected]etrologic.com

Taitou-Ku, Tokyo 110-0015 Japan

SOUTH AMERICA

Brazil Metrologic do Brasil Ltda. Tel: 55-11-5182-8226

Rua da Paz 2059 Fax: 55-11-5182-8315

CEP 04713-002 Email: [email protected]etrologic.com

Chácara Santo Antônio

São Paulo, SP, Brasil

Outside Brazil MetrologicSouth AmericaTel: 55-11-5182-7273

Rua da Paz 2059Fax: 55-1-5182-7198

CEP 04713-002 Email: [email protected]gic.com

Chácara Santo Antônio

São Paulo, SP, Brasil

stored in any form or by any means without prior written consent, except by reviewer, who may quote brief

passages in a review, or provided for in the Copyright Act of 1976.

Products and brand names mentioned in this document are trademarks of their respective companies.

iii

TABLE OF CONTENTS

MS6130 Hand Held Bar Code Scanner....................................................... 1

MX003 Series Scanner Interfaces............................................................... 2

Unpacking List............................................................................................. 3

Connections of the “MX” Interface to the Host Device................................. 4

Connections of the Keyboard Wedge “MX” Interface to the PC................... 5

Connections of the MS700i/MS720i with “MX” to the Host Device.............. 6

Configuration of the MS700i/MS720i with “MX”........................................... 7

Configuration of the MS700i/MS720i with “MX” to the Host System............ 8

Configuration of the “MX” to the ScanPal®Data Collector........................... 9

Configuration of the “MX” to the RS-232 Light Pen or Keyboard Wedge

Host System ................................................................................ 10

Keyboard Wedge (KB) Interface................................................................ 11

Configuration of the MS6130 Hand-Held................................................... 15

Enabling the MS700i/MS720i Scanner’s RF Low Speed Option ............... 16

Changing the ID......................................................................................... 17

Matching Procedure................................................................................... 18

Parts of the MS6130 Hand-Held Bar Code Scanner.................................. 19

Components of the MS6130 Series Stand................................................. 20

Installation of the MS6130 Series Stand.................................................... 21

Installation of the 6000 Series Universal Charging Stand.......................... 22

NiCd Battery Charger with Reconditioning Feature................................... 23

Visual Indicators ........................................................................................ 24

Audible Indicators...................................................................................... 25

Labels........................................................................................................ 27

TABLE OF CONTENTS (CONTINUED)

Maintenance.............................................................................................. 27

Troubleshooting......................................................................................... 28

Appendix A

Specifications............................................................................... 29

Appendix B

Default Settings of the MS6130 and “MX” Interface .................... 32

Appendix C

MX003 Series Scanner Interface Pin Assignments ..................... 36

Appendix D

Warranty and Disclaimer.............................................................. 37

Appendix E

Notices......................................................................................... 38

Appendix F

Patents......................................................................................... 39

Index.......................................................................................................... 40

THE MS6130 HAND HELD BAR CODE SCANNER

MS6130 Hand Held Bar Code Scanners are wireless scanners with a

mobility range of up to 30 feet from the receiver. When not in use, the

scanner rests in a universal-charging stand. The scanner will be fully

charged in 2 hours when not scanning in the stand. A fully charged MS6130

can provide up to 8 hours of wireless, hand-held scanning. After dormant

periods, the scanner is programmed to enter a timeout mode that will extend

the battery life. There is a reactivation switch conveniently located on the

side of the scanner to turn the unit back on. The scanner has a replaceable

battery pack for added reliability and convenience for your scanning

application.

Metrologic’s scanner uses wireless data communication to transfer

information to the host. The MS6130 may be used with Metrologic’s MX003

Series Scanner Interfaces to provide the short range, one-way

communication link between the scanner and an RS-232, Keyboard Wedge

or Light Pen host device.

The MS6130 uses Metrologic’s patented Infrared Object Sensor for

triggerless operation. The scanner, after a specified time, will enter a

standby mode where the VLD and motor will shut off. Simply present an

object in front of the scanner window, the Infrared Sensor will reactivate the

scanner and the unit will be ready to scan.

To indicate the status of the scanner, the MS6130 uses a green and red

LED located on the top of the scanner. By understanding the flashes of the

LED, you can determine a successful read, laser status, low battery power,

sleep mode, and program mode. There are audible indicators on the

scanner as well. The scanner will beep; one, two or three times to indicate

successful power up or scan, low battery, or program mode, respectively, or

give a razzberry tone; which indicates the scanner has failed diagnostics

upon power up.

In this manual, the MS6130 may be referred to as the scanner or transmitter.

MX003 SERIES SCANNER INTERFACES

Metrologic’s MX003 Series Scanner Interfaces provide a short range, one-

way wireless data communication link between a remote portable scanner

and an RS-232 or light pen host device. Specifically, Metrologic’s MS6130

Hand-Held Laser Scanners include a Liberty®RF transmitter board.

Metrologic’s MS700i/MS720i series scanners, TECH series scanners may

be connected to a MX Series scanner interface. The “MX” scanner interface

includes a RF receiver and a digital interface board.

The MS6130 scanner provides two functions:

•Scans and decodes bar codes

•Transmits scanned data to the RF receiver or “MX”

When the “MX” interface is connected to a ScanPal®or host device such as

a portable data terminal (PDT), it provides two functions

(For example, refer to Figure 1):

•Performs the RF receiver function; for example, beeps to show it has

received data from the transmitter

•Communicates with the host device

In this manual, MX003 series scanner interfaces may be referred to as the

“MX”, “MX” interface or receiver. Suffix of the MX003 model designation will

vary due to country of usage.

Figure 1

Any RS-232C or

Light Pen Device with

MX003 RF Receiver

MS6130 with Liberty

Scanner Interface (Transmitter)

Up to 30 Ft.

(conditions permitting)

UNPACKING LIST

Your shipment will contain a set of items from the two groups listed below:

Transmitter Group:

•MS6130 Hand-Held Scanner

•Stand #45880 (optional)

•Stand #45558, 45559 and 45560 (optional)

•MS4120 Programming Guide

Receiver Group:

•“MX” Scanner Interface

•MCA951 adapter or adapter cable (if required)

•Regulated 5V power supply, MLPN: 6090/6091

(115/220 VAC)(optional)

•“MX” Scanner Interface

•MS700i with Liberty®RF Receiver option cable

•Power supply (optional)

•Communication cable with connection for power

supply (optional) or communication cable only

•Stand #45483 (optional)

•MS700i and MS720i Installation and User’s Guide

•ScanSelect™ Scanner Programming Guide (#2186)

•ScanPal®Data Collector

•“MX” Scanner Interface

•Upload cable, MLPN: 51061 and 51236

•MCA951 adapter

•Regulated 5V power supply, MLPN: 6090/6091 (115/220 VAC)

•ScanPal Data Collector Installation and User’s Guide

CONNECTIONS OF THE “MX” INTERFACE TO THE HOST DEVICE

Except version 17

1. Turn off the host system.

2. Connect the MCA to the host device. Connect the “MX” interface to

the MCA.

3. Check the AC input requirements of the transformer to make sure the

voltage matches the AC outlet. The socket outlet should be near the

equipment and easily accessible.

4. Plug the transformer into the side of the MCA and the AC outlet.

5. Power up the host system.

Figure 2: Connecting the “MX” (through the MCA) to a host device

To maintain compliance with applicable standards, all circuits connected

to the unit must meet the requirements for SELV (Safety Extra Low

Voltage) according to EN 60950.

Transformer

“MX”

Sca

r In

ace

MCA

Host System

MS6130 with Liberty

Scanner Interface

(Transmitter)

Altri manuali per MS6130

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Metrologic Lettore di codici a barre

Metrologic

Metrologic StratosS MS2220 Manuale utente

Metrologic

Metrologic MS7320 InVista Series Manuale utente

Metrologic

Metrologic MS 1690 Focus Series Manuale utente

Metrologic

Metrologic MS770 Manuale utente

Metrologic

Metrologic MS 1690 Focus Series Manuale utente

Metrologic

Metrologic MS7120 Orbit Manuale utente

Metrologic

Metrologic IS4220 ScanGlove Manuale utente

Metrologic

Metrologic IS1000 Series Manuale utente

Metrologic

Metrologic MS5100 Eclipse Series Manuale utente

Metrologic

Metrologic Fusion MS3780 Manuale utente

Metrologic

Metrologic MLPN 2168 Manuale utente

Metrologic

Metrologic Cubit MS6520 Series Manuale utente

Metrologic

Metrologic MetroSelect Manuale utente

Metrologic

Metrologic IS3480-00 Manuale utente

Metrologic

Metrologic MS2020 Stratos Manuale utente

Metrologic

Metrologic MS9530 Series Manuale utente

Metrologic

Metrologic Genesis MS7580 Manuale utente

Metrologic

Metrologic MK3780-31A62 Manuale utente

Metrologic

Metrologic TECH 7 MS770 Manuale utente

Metrologic

Metrologic MS1633 FocusBT Manuale utente

Metrologic

Metrologic MS9500 Voyager Series Manuale utente

Metrologic

Metrologic Stratos MS2420 Manuale utente

Metrologic

Metrologic MS6720 Manuale utente

Metrologic

Metrologic MS860 Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente