Metrologic Cubit IS6520 Series Manuale utente
METROLOGIC INSTRUMENTS, INC.
IS6520/MS6520 Cubit®Series
Omnidirectional Bar Code Scanner
Installation and User’s Guide
ii
LOCATIONS
CORPORATE HEADQUARTERS
NORTH AMERICA
EUROPEAN, MIDDLE EAST & AFRICAN
HEADQUARTERS
USA, NEW JERSEY GERMANY, MUNICH
Metrologic Instruments, Inc. Metrologic Instruments GmbH
Tel: 1-800-ID-METRO Fax: 856-228-6673 Tel: 49-89-89019-0 Fax: 49-89-89019-200
SOUTH AMERICA, BRAZIL SÃO PAULO GERMANY, MUNICH
Metrologic do Brasil Ltda. Metrologic Instruments GmbH
Tel: 55-11-5182-8226 Fax: 55-11-5182-8315 Tel: 49-89-89019-0 Fax: 49-89-89019-200
SOUTH AMERICA, OUTSIDE BRAZIL SÃO PAULO ITALY, BOLOGNA
Metrologic South America Metrologic Instruments Italia srl
Tel: 55-11-5182-7273 Fax: 55-11-5182-7198 Tel: +39 0 51 6511978 Fax: +39 0 51 6521337
ASIA, SINGAPORE FRANCE, PARIS
Metrologic Asia (Pte) Ltd Metrologic Eria France SA
Tel: 65-6842-7155 Fax: 65-6842-7166 Tel: +33 (0) 1 48.63.78.78
Email: i[email protected]
CHINA, SUZHOU
Metro Technologies Co., Ltd. SPAIN, MADRID
Tel: 86-512-62572511 Fax: 86-512-62571517 Metrologic Eria Ibérica, SL
Email: [email protected]
Metro Sales Office
Tel: 86-512-67622550 Fax: 86-512-67622560 Metrologic Europe Repair Center (MERC)
Tel: +34 913 751 249 Fax: +34 913 270 437
JAPAN, TOKYO
Metrologic Japan Co., Ltd. UNITED KINGDOM, BASINGSTOKE
Tel: 81-03-3839-8511 Fax: 81-03-3839-8519 Metrologic Instruments UK Limited
Fax: +44 (0) 1256 365955
Email: i[email protected]etrologic.com
RUSSIA, MOSCOW
Metrologic Russia
Tel: +7 095 730 7424 Fax: +7 095 730 7425
Email: i[email protected]
Copyright
© 2004 by Metrologic Instruments, Inc. All rights reserved. No part of this work may be reproduced,
transmitted, or stored in any form or by any means without prior written consent, except by reviewer, who
may quote brief passages in a review, or provided for in the Copyright Act of 1976.
Products and brand names mentioned in this document are trademarks of their respective companies.
iii
TABLE OF CONTENTS
Introduction................................................................................................1
Scanner and Accessories..........................................................................2
Installation
RS232, Light Pen (IS6520-41/MS6520-41) ...........................................3
Keyboard Wedge (IS6520-47/MS6520-47)............................................4
Stand Alone Keyboard (IS6520-47/MS6520-47)....................................5
Disconnecting the PowerLink Cable from the Scanner.............................6
Scanner Parts............................................................................................7
Mounting Holes .........................................................................................7
Stands .......................................................................................................8
Audible Indicators......................................................................................9
Failure Modes..........................................................................................10
Visual Indicators ......................................................................................11
Programming Modes...............................................................................12
Labels......................................................................................................15
Maintenance............................................................................................15
Optimal Low and Close Depth of Field....................................................16
Optimal High and Normal Depth of Field ................................................17
Far Depth of Field....................................................................................18
Troubleshooting Guide ............................................................................19
Appendix A
Design Specifications...........................................................................23
Appendix B
Default Settings....................................................................................25
iv
TABLE OF CONTENTS
Appendix C
Scanner Pinout Connections ...............................................................29
Cable Connector Configurations..........................................................29
Appendix D
Warranty and Disclaimer .....................................................................31
Appendix E
Notices .................................................................................................32
Appendix F
Patents.................................................................................................34
Index........................................................................................................35
1
INTRODUCTION
Metrologic's Cubit®Series of compact omnidirectional bar code scanners
includes the MS6520 for retail applications and the IS6520 for OEM applications.
Both Cubit models have several key product features including:
•Fully Automatic Scanning Operation
•Single Cable Interface To Host
•PowerLink Quick Disconnect User-Replaceable Cables
•7 Beeper Tones
•Programmable Depth Of Fields
•Capable Of Scanning And Decoding All Standard Barcodes Including
Rss-14, RSS Limited And RSS Expanded Bar Codes
•OPOS And JPOS System Compatible
•Sunrise 2005 Compliant
The MS6520 is equipped with a tilt stand that can be mounted securely to the
countertop or wall for fixed -mount scanning. The multi-position stand has a
locking design that rotates the head of the MS6520 up to 64° making it perfect
for installation underneath check writing and credit card stands.
Since the IS6520 was designed to be part of an OEM product, it does not
include the tilt stand but instead is equipped with three (3) threaded mounting
holes on the back of the unit. The modular design of the IS6520 is versatile
enough for integration into a diversity of applications including kiosks, reverse
vending machines, time/attendance machines and price look-up systems.
A fixed vertical stand is also available for additional purchase. Please contact a
customer service representation at 1-800-ID-METRO for information.
SCANNER INTERFACE
IS6520-41
or
MS6520-41
Full RS232 and Light Pen Emulation
IS6520-47
or
MS6520-47
Keyboard Wedge, Stand Alone Keyboard and
RS232 Transmit/Receive
2
SCANNER AND ACCESSORIES
BASIC KIT COMPONENTS
Part No. Description
IS6520/MS6520 Cubit®Omnidirectional Scanning Engine
00-02421 Installation and User’s Guide*
00-02407 MetroSelect®Configuration Guide*
*Available for download on Metrologic’s website, www.metrologic.com.
OPTIONAL ACCESSORIES
Part No. Description
AC to DC Power Transformer – Regulated 5.2VDC @ 650 mA output.
45-45593 120V United States
45-45591 220V-240V Continental European
45-45992 220V-240V United Kingdom
46-46803 220V-240V Australia
46-46983 220V-240V China
xxx - specifies connection to the host
53-53xxx PowerLink cable with built in power jack
2.7m (9’) coiled cord, long strain relief
54-54xxx PowerLink cable with built in power jack
2.1m (7’) straight cord, short strain relief
54-54002 Keyboard Wedge PowerLink cable and Adapter Cable
54-54020 Stand Alone Keyboard PowerLink Cable
46-46486 Tilt Stand
46-46145 Fixed Vertical Stand
To order additional items, contact the dealer, distributor or call Metrologic's
Customer Service Department at 1-800-ID-METRO (1-800-436-3876).
3
INSTALLATION
RS232, Light Pen (IS6520-41/MS6520-41)
1. Turn off the host device.
2. Plug the male 10-pin RJ45 end of the
PowerLink cable into the 10-pin socket
on Cubit. You will hear a ‘click’ when
the connection is made.
3. Connect the 9-pin female end of the
PowerLink cable to the host device.
Note: Skip to step 6 if receiving power
from the host device.
4. Plug the external power supply into the
power jack on the PowerLink cable.
Check the AC input requirements
of the power supply to make sure
the voltage matches the AC
outlet. The outlet must be
located near the equipment and
be easily accessible.
5. Connect AC power to the transformer.
6. Turn on the host device.
Plugging the scanner into a port on the host system does not
guarantee that scanned information will be communicated properly to
the host system. The scanner is shipped from the factory configured
to a set of default parameters. Please refer to the MetroSelect
Configuration Guide (MLPN 00-02407) for instructions on changing the
scanner’s configuration. In addition, please check that the scanner
and host system are using the same communication protocol.
Caution:
To maintain compliance with applicable standards, all circuits connected to the scanner
must meet the requirements for SELV (Safety Extra Low Voltage) according to EN 60950.
To maintain compliance with standard CSA C22.2 No. 950/UL 1950 and norm EN 60950,
the power source should meet applicable performance requirements for a limited power
source.
4
INSTALLATION
Keyboard Wedge (IS6520-47/MS6520-47)
1. Turn off the host device.
2. Plug the male 10-pin RJ45 end of the
PowerLink cable into the 10-pin socket
on Cubit. You will hear a ‘click’ when
the connection is made.
3. Disconnect the keyboard from the host
device.
4. Connect the “Y” end of the PowerLink
cable to the keyboard and the keyboard
port on the host device. If necessary
use the male/female adapter cable
supplied with the scanner to make the
proper connections.
5. Plug the external power supply into the
power jack on the PowerLink cable.
Check the AC input requirements
of the power supply to make sure
the voltage matches the AC
outlet. The outlet must be
located near the equipment and
be easily accessible.
6. Connect AC power to the transformer.
7. Turn on the host device.
Powering the Cubit directly from the host device can sometimes
cause interference with the operation of the scanner or the computer.
Not all computers supply the same current through the keyboard port.
For this reason, Metrologic recommends using an external power
supply. For additional information contact a Metrologic customer
service representative.
Caution:
To maintain compliance with applicable standards, all circuits connected to the scanner
must meet the requirements for SELV (Safety Extra Low Voltage) according to EN 60950.
To maintain compliance with standard CSA C22.2 No. 950/UL 1950 and norm EN 60950,
the power source should meet applicable performance requirements for a limited power
source.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Metrologic Lettore di codici a barre
Metrologic
Metrologic MS9500 Voyager Series Manuale utente
Metrologic
Metrologic MK1690-61A38 Manuale utente
Metrologic
Metrologic MS7320 InVista Series Manuale utente
Metrologic
Metrologic IS421X ScanGlove Manuale utente
Metrologic
Metrologic MS 1690 Focus Series Manuale utente
Metrologic
Metrologic Cubit MS6520 Series Manuale utente
Metrologic
Metrologic MS9500 Voyager Series Manuale utente
Metrologic
Metrologic Stratos MS2x20 Series Istruzioni per l'installazione e il funzionamento
Metrologic
Metrologic MS770 Manuale utente
Metrologic
Metrologic MLPN 2159 Manuale utente
Metrologic
Metrologic MS5100 Eclipse Series Manuale utente
Metrologic
Metrologic Eclipse MS5145 Manuale utente
Metrologic
Metrologic IS4225 ScanGlove Manuale utente
Metrologic
Metrologic FocusE IS1650 Manuale utente
Metrologic
Metrologic MS863 Manuale utente
Metrologic
Metrologic IS3480 QuantumE Manuale utente
Metrologic
Metrologic MS 1690 Focus Series Manuale utente
Metrologic
Metrologic MS1890 Focus Manuale utente
Metrologic
Metrologic StratosS MS2220 Manuale utente
Metrologic
Metrologic TECH 8 Manuale utente
Manuali Lettore di codici a barre popolari di altre marche
POSMicro
POSMicro Datalogic PowerScan D7100 Manuale utente
Marson
Marson MT780 Guida rapida alla configurazione
NCR
NCR RealPOS Manuale utente
Motorola
Motorola SE3300 Guida rapida alla configurazione
Element
Element P130BT Manuale utente
Motorola
Motorola Symbol LS3008 Manuale di installazione e funzionamento
