Flowmax
44i General safety instructions
M I B 2
General safety instructions
Please always observe the following safety instructions!
Please pay attention to the safety instructions with the following pictograms and
signal words in these operating instructions:
IMPORTANT! Indicates situations or cases which, if not
avoided, could result damage or failure on the used
equipment.
WARNING! Indicates general hazardous situations or
cases which, if not avoided, could result in serious injury.
NOTICE! Is used to lead users to helpful information not
related to personal injury.
Intended use
•The flowmeter Flowmax 44i may only be used for measuring the flow of
pure, homogeneous liquids.
•The volume flowmeter Flowmax 44i is manufactured and designed
according to the current industry standard EN 61010 (corresponds to VDE
0411 “Safety specifications for electrical measurement, control and
laboratory devices”).
•The manufacturer cannot be held liable for any damage from inappropriate
or unintended use. Conversions and/or changes to the flowmeter may only
be made according to these operating instructions.
Personnel for installation, commissioning and operation
•Assembly, electrical installation, commissioning and maintenance of
the flowmeter must be carried out by qualified, trained personnel. The
qualified personnel must read and understand these operating
instructions and must follow all appropriate instructions.
•The installer has to ensure that the flowmeter is correctly connected
according to the electrical connection diagrams.
Technological progress
The manufacturer reserves the right to revise, alter, or modify the flowmeter to
the most current technology without special prior notice. Further information
about the latest updates and potential additions to these operating instructions
are available from MIB.
IMPORTANT!
WARNING!
NOTICE!
