Micron T2252 Manuale utente

Laser Distance Meter

User Manual

Contents

1.Use of the instrument…………………………… 1

2. Start-up………………………………………….5

3. Menu Functions…………………………………6

4. Operation………………………………………..7

5. Measuring……………………………………….8

6. Functions………………………………………..9

7. Appendix………………………………………..10

8. Technical Data…………………………………..11

9. Measuring Conditions…………………………..12

10.Accessories……………………………………..13

Congratulations on the purchase of this product. Carefully read

the safety instructions and the user manual before using this product. The

person responsible for the instrument must ensure that all users understand

these directions and adhere to them.

Safety Instructions

Symbols Used

The following symbols are used to distinguish precautions by the degree of

injury or damage that may result if the precaution is ignored.

Warning

Caution: Important paragraphs, which must be adhered to them.

1. Use of the instrument

a) Press to switch on the device. The laser beam emits from the

front of the meter.

b) Press again to measure the distance. The results will show on

the screen.

Cautions:

-Do not look straight at the laser beam

-Do not use the device in flammable and explosive environments

-Remove the batteries to avoid leakage if the device is not to be used for a

long period of time

Care

Wipe off dirt with a damp, soft cloth or a clean cloth moistened with alcohol.

Be careful with the optical components (such as optical lens): wipe with a

clean soft cloth or cotton swab moistened with distilled water (same as

cleaning glass or camera lens). Do not use aggressive cleaning agents or

solutions.

Permitted use

Measuring distances, areas and volumes

Prohibited use

-Using the instrument without instruction

-Using outside the stated limits

-Deactivation of safety systems and removal of explanatory and hazard

labels.

-Opening of the equipment by using tools (screw drivers. etc.), as far as not

specifically permitted for certain cases.

-Carrying out modification or conversion of the product

-Use of accessories from other manufacturers without the approval of our

company.

Limits of use

See section “Technical Data”

Responsibilities of the person in charge of the instrument

Warning:

The person responsible for the instrument must ensure that the

equipment is used correctly and is responsible for training and safety of the

equipment when in use. The person in charge of the instrument has the

following duties:

-To understand the safety instructions of the product and the instructions in

the user manual.

-To be familiar with local safety regulations relating to accident prevention

-To inform local dealer immediately if the equipment becomes unsafe.

Hazards in use

Caution：

Watch out for incorrect distance measurements. If the instrument is

defected or if it has been dropped or has been misused or modified.

Precautions:

-Carry out periodic test measurements, particularly after the instrument has

been subject to abnormal use, and before, during and after important

measurement.

-Make sure the optics are kept clean and undamaged

Caution:

If the instrument is used for positioning moving objects (e.g.

cranes, building equipment, platforms, etc.) unforeseen events may cause

invalid measurements

Warning:

Flat batteries must not be disposed of with household waste.

The product must not be disposed of with household waste.

Take them to the collection points provided in accordance with national or

local regulations.

Electromagnetic compatibility (EMC)

The term” electromagnetic compatibility” means the capability of the product

to function smoothly in an environment where electromagnetic radiation

and electrostatic discharges are present, and without causing

electromagnetic interference to other equipment.

Warning:

The product conformstothemoststringent requirementsoftherelevantstandardsand

regulations.Yet,thepossibilityofitcausinginterferenceinotherdevicescannotbetotally

excluded.

Caution:

Never attempt to repair the product yourself. In case of damage, contact

the local dealership.

Laser classification

Integrated distance meter

This product produces a visible laser beam, which emits from the front of the

instrument.

It is a class 2 laser product in accordance with:

IEC60825-1:2007 “Radiation safety of laser products” laser class 2 products:

Do not stare into the laser beam or direct it towards other people.

Warning:

Looking directly into the beam with optical aids (e.g. binoculars telescopes)

can be hazardous.

Precautions:

Do not look directly into the beam with optical aids.

C aution：

Looking into the laser beam may be hazardous to the eyes.

Precautions:

Do not look into the laser beam. Make sure the laser is aimed above or below

eye level.

2. Start-up

2-1 inserting/replacing batteries

1). Remove battery compartment lid and attach hand strap

2). Insert batteries

3). Close the battery compartment

Replace the batteries when the symbol flashes permanently in

the display.

Remove the batteries when the meter is not going to be used for a

long period of time to avoid the danger of corrosion

Only use alkaline or rechargeable batteries

3. Menu Functions

3-1. Changing unit of measurement

Press to turn the meter on and press and hold for a while to

change the unit of distance measurement. The following units are available:

m (meter), ft (feet), in (inch), ftin (feet-inch 1/16) or ruler

3-2 Turn on the laser

To turn the laser on, press button.

Aim the laser at a target and press button again. Display shows

measurement result.

Press button to clear the measurement and turn the laser off.

3-3 Screen Change

Press together to change the direction of the screen display

4. Operation

4-1 Switching the meter on/off

Press to turn the instrument and laser on. The display shows the

battery symbol until is pressed again.

Press and hold button to turn the instrument off

The instrument switches off automatically after three minutes of no activity.

4-2. Clear Button

Press button to cancel the last action. While making area or volume

measurements, each single measurement can be deleted and re-measured in

succession.

4-3 Reference Setting

Indice

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente